# SOME DESCRIPTIVE TITLE. # Copyright (C) Micah Lee, et al. # This file is distributed under the same license as the OnionShare package. # FIRST AUTHOR , 2020. # msgid "" msgstr "" "Project-Id-Version: OnionShare 2.3\n" "Report-Msgid-Bugs-To: onionshare-dev@lists.riseup.net\n" "POT-Creation-Date: 2022-07-04 17:16-0400\n" "PO-Revision-Date: 2022-01-20 11:57+0000\n" "Last-Translator: george kitsoukakis \n" "Language: el\n" "Language-Team: el \n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Generated-By: Babel 2.10.3\n" #: ../../source/tor.rst:2 msgid "Connecting to Tor" msgstr "Σύνδεση στο Tor" #: ../../source/tor.rst:4 msgid "" "When OnionShare starts, it will show you a screen asking you to connect " "to the Tor network." msgstr "" #: ../../source/tor.rst:8 msgid "" "You can toggle on the switch \"Connect to Tor automatically\" before " "clicking \"Connect to Tor\". This means that next time OnionShare starts," " it will automatically connect with its Tor connection settings from the " "last session, instead of presenting you with the connection options. If " "the connection fails, you can still try bridges or reconfigure Tor via " "the \"Network Settings\" button." msgstr "" #: ../../source/tor.rst:11 msgid "" "You can click \"Connect to Tor\" to begin the connection process. If " "there are no problems with your network, including any attempts to block " "your access to the Tor network, this should hopefully work the first " "time." msgstr "" #: ../../source/tor.rst:13 msgid "" "Or, if you want to manually configure Bridges or other Tor settings " "before you connect, you can click \"Network Settings\"." msgstr "" #: ../../source/tor.rst:16 msgid "Automatic censorship circumvention" msgstr "" #: ../../source/tor.rst:18 msgid "" "When you click \"Connect to Tor\", if OnionShare fails to connect, it " "might be because Tor is censored in your country or on your local " "network." msgstr "" #: ../../source/tor.rst:20 msgid "If this occurs, you will have these choices:" msgstr "" #: ../../source/tor.rst:22 msgid "Try again without a bridge" msgstr "" #: ../../source/tor.rst:23 msgid "Automatically determine my country from my IP address for bridge settings" msgstr "" #: ../../source/tor.rst:24 msgid "Manually select my country for bridge settings" msgstr "" #: ../../source/tor.rst:28 msgid "" "If you choose the \"Try again without a bridge\" option, OnionShare will " "retry connecting to Tor like normal, without attempting to bypass " "censorship." msgstr "" #: ../../source/tor.rst:30 msgid "" "The other two options will attempt to automatically bypass censorship " "using Tor bridges. If your network provider is blocking access to the Tor" " network, you can hopefully still connect to a Tor bridge, which will " "then connect you to the Tor network, circumventing the censorship. Both " "of these options use the Tor Project's Censorship Circumvention API to " "provide you with bridge settings that should work for you. OnionShare " "will temporarily use the `Meek " "`_ domain-" "fronting proxy to make a non-Tor connection from your computer to Tor's " "Censorship Circumvention API. The Meek proxy hides the fact that you are " "trying to find a way to connect to Tor." msgstr "" #: ../../source/tor.rst:36 msgid "" "If you choose \"Automatically determine my country from my IP address for" " bridge settings\", the Censorship Circumvention API will consider your " "IP address (yes, your real IP address) to determine what country you " "might reside in. Based on the country information, the API will try to " "automatically find bridges that suit your location." msgstr "" #: ../../source/tor.rst:41 msgid "" "If you choose \"Manually select my country for bridge settings\", the " "Censorship API will find the bridges that suit the country that you " "specified." msgstr "" #: ../../source/tor.rst:46 msgid "How automatic censorship circumvention works" msgstr "" #: ../../source/tor.rst:48 msgid "" "If the Censorship Circumvention API finds bridges that it believes will " "suit you, OnionShare will try to reconnect to Tor using those bridges. If" " the API does not find any bridges for your location, OnionShare will ask" " the API for \"fallback\" options, and then try to reconnect using those." msgstr "" #: ../../source/tor.rst:50 msgid "" "If for some reason OnionShare fails to connect to the Censorship API " "itself, or if the API returns an error message, OnionShare will attempt " "to use the obfs4 built-in bridges." msgstr "" #: ../../source/tor.rst:52 msgid "" "It's important to note that the requests to the Censorship Circumvention " "API do not go over the Tor network (because if you could connect to Tor " "already, you wouldn't need to connect to the API)." msgstr "" #: ../../source/tor.rst:54 msgid "" "Even though it's hard for an adversary to discover where the Meek request" " is going, this may still be risky for some users. Therefore, it is an " "opt-in feature. The use of Meek and non-torified network requests are " "limited only to making one or two requests to the Censorship " "Circumvention API. Then Meek is stopped, and all further network requests" " happen over the Tor network." msgstr "" #: ../../source/tor.rst:56 msgid "" "If you are uncomfortable with making a request that doesn't go over the " "Tor network, you can click \"Network Settings\" (or the Settings icon in " "the bottom right corner, followed by the Tor Settings tab in the screen " "that appears), and manually configure bridges. After you save any bridge " "settings, OnionShare will try to reconnect using those bridges." msgstr "" #: ../../source/tor.rst:59 msgid "Manually configure Tor settings" msgstr "" #: ../../source/tor.rst:61 msgid "" "You can get to the Tor settings by clicking \"Network Settings\" on the " "welcome screen, or by clicking the \"⚙\" icon in the bottom-right corner " "of the application, and then switch to the Tor Settings tab in the screen" " that appears." msgstr "" #: ../../source/tor.rst:65 msgid "" "Here are the different ways you can configure OnionShare to connect to " "Tor:" msgstr "" #: ../../source/tor.rst:68 msgid "Use the Tor version built into OnionShare" msgstr "Χρήση της έκδοσης Tor στο OnioShare" #: ../../source/tor.rst:70 msgid "" "This is the default, simplest and most reliable way that OnionShare " "connects to Tor. For this reason, it's recommended for most users." msgstr "" "Ο προεπιλεγμένος, απλούστερος και συχνότερος τρόπος σύνδεσης του " "OnionShare με το Tor, όπου προτείνεται για τους περισσότερους χρήστες." #: ../../source/tor.rst:73 msgid "" "When you open OnionShare, it launches an already configured ``tor`` " "process in the background for OnionShare to use. It doesn't interfere " "with other ``tor`` processes on your computer, so you can use the Tor " "Browser or the system ``tor`` on their own." msgstr "" "Με την έναρξη του OnionShare, ξεκινά στο παρασκήνιο η προρυθμισμένη " "υπηρεσία του ``tor``. Δεν συνεργάζεται σε άλλες διαδικασίες ``tor`` του " "υπολογιστή σας, οπότε μπορείτε να χρησιμοποιήσετε το Tor Browser ή το " "σύστημα ``tor`` ξεχωριστά." #: ../../source/tor.rst:76 msgid "**Using bridges**" msgstr "" #: ../../source/tor.rst:78 #, fuzzy msgid "" "To use a bridge, you must select \"Use the Tor version built into " "OnionShare\" and check the \"Use a bridge\" checkbox." msgstr "" "Για χρήση γέφυρας, ανοίξτε την καρτέλα ρυθμίσεων του Tor. Επιλέξτε το " "\"Χρήση της έκδοσης Tor με το OnionShare\" και επιλέξτε το \"Χρήση " "γέφυρας\"." #: ../../source/tor.rst:80 msgid "" "Try using a built-in bridge first. Using `obfs4` or `snowflake` bridges " "is recommended over using `meek-azure`." msgstr "" "Δοκιμάστε αρχικά μια ενσωματωμένη γέφυρα. Η χρήση των γεφυρών `obfs4` ή " "`snowflake` προτείνονται με χρήση του `meek-azure`." #: ../../source/tor.rst:84 msgid "" "If using a built-in bridge doesn't work, you can request a bridge from " "torproject.org. You will have to solve a CAPTCHA in order to request a " "bridge. (This makes it more difficult for governments or ISPs to block " "access to Tor bridges.)" msgstr "" "Εάν δεν λειτουργεί η χρήση ενσωματωμένης γέφυρας, μπορείτε να αιτηθείτε " "μια γέφυρα από το torproject.org. Θα πρέπει να επιλύσετε το CAPTCHA για " "αίτηση της γέφυρας. (Με αυτό τον τρόπο καθίσταται δυσκολότερο για τις " "κυβερνήσεις και παρόχους να μπλοκάρουν τις γέφυρες του Tor)." #: ../../source/tor.rst:88 msgid "" "You also have the option of using a bridge that you learned about from a " "trusted source." msgstr "" "Μπορείτε να χρησιμοποιήσετε μια γέφυρα που ήδη γνωρίσετε από μια έμπιστη " "πηγή." #: ../../source/tor.rst:91 msgid "Attempt auto-configuration with Tor Browser" msgstr "Αυτόματη ρύθμιση με Tor Browser" #: ../../source/tor.rst:93 msgid "" "If you have `downloaded the Tor Browser `_ " "and don't want two ``tor`` processes running, you can use the ``tor`` " "process from the Tor Browser. Keep in mind you need to keep Tor Browser " "open in the background while you're using OnionShare for this to work." msgstr "" "Εάν έχετε `κατεβάσει το Tor Browser `_ και " "δεν θέλετε να εκτελούνται δύο διεργασίες ``tor``, μπορείτε να " "χρησιμοποιήσετε τη διαδικασία ``tor`` από το Tor Browser. Λάβετε υπόψη " "ότι πρέπει να διατηρήσετε το Tor Browser ανοιχτό στο παρασκήνιο ενώ " "χρησιμοποιείτε το OnionShare." #: ../../source/tor.rst:97 msgid "Using a system ``tor`` in Windows" msgstr "Χρήση του συστήματος ``tor`` σε Windows" #: ../../source/tor.rst:99 msgid "" "This is fairly advanced. You'll need to know how edit plaintext files and" " do stuff as an administrator." msgstr "" "Είναι αρκετά προχωρημένο. Θα πρέπει να γνωρίζετε επεξεργασία αρχείων " "απλού κειμένου και να μπορείτε να κάνετε εργασίες ως διαχειριστής." #: ../../source/tor.rst:101 msgid "" "Download the Tor Windows Expert Bundle `from " "`_. Extract the compressed file" " and copy the extracted folder to ``C:\\Program Files (x86)\\`` Rename " "the extracted folder with ``Data`` and ``Tor`` in it to ``tor-win32``." msgstr "" "Κάντε λήψη του Tor Windows Expert Bundle `από " "`_. Αποσυμπιέστε το αρχείο και " "αντιγράψτε το στο φάκελο ``C:\\Program Files (x86)\\`` μετονομάστε το " "φάκελο με περιεχόμενα τα ``Data`` και ``Tor`` σε ``tor-win32``." #: ../../source/tor.rst:105 msgid "" "Make up a control port password. (Using 7 words in a sequence like " "``comprised stumble rummage work avenging construct volatile`` is a good " "idea for a password.) Now open a command prompt (``cmd``) as an " "administrator, and use ``tor.exe --hash-password`` to generate a hash of " "your password. For example::" msgstr "" "Δημιουργήστε έναν ισχυρό κωδικό πρόσβασης για τη θύρα ελέγχου. (Η χρήση 7" " λέξεων σε μια ακολουθία όπως το ``comprised stumble rummage work " "avenging construct volatile`` είναι καλή ιδέα για κωδικό πρόσβασης). Στη " "συνέχεια ανοίξτε ως διαχειριστής τη γραμμή εντολών (``cmd``) και " "χρησιμοποιήστε το ``tor. exe --hash-password`` για τη δημιουργία ενός " "αναγνωριστικού του κωδικού πρόσβασής σας. Για παράδειγμα::" #: ../../source/tor.rst:112 msgid "" "The hashed password output is displayed after some warnings (which you " "can ignore). In the case of the above example, it is " "``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``." msgstr "" "Το αναγνωριστικό του κωδικού πρόσβασης όπως εμφανίζεται μετά από πολλές " "προειδοποιήσεις (τις οποίες μπορείτε να αγνοήσετε). Για το παραπάνω " "παράδειγμα, εμφανίζεται " "``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``." #: ../../source/tor.rst:114 msgid "" "Now create a new text file at ``C:\\Program Files (x86)\\tor-" "win32\\torrc`` and put your hashed password output in it, replacing the " "``HashedControlPassword`` with the one you just generated::" msgstr "" "Δημιουργήστε ένα νέο αρχείου κειμένου σε ``C:\\Program Files (x86)\\tor-" "win32\\torrc`` και προσθέστε το αναγνωριστικό του κωδικού πρόσβασης, " "αντικαθιστώντας το ``HashedControlPassword`` με αυτό που δημιουργήθηκε::" #: ../../source/tor.rst:119 msgid "" "In your administrator command prompt, install ``tor`` as a service using " "the appropriate ``torrc`` file you just created (as described in " "``_). Like " "this::" msgstr "" "Από τη γραμμή εντολών που έχετε ανοίξει ώς διαχειριστής, κάντε " "εγκατάσταση ως υπηρεσία το ``tor`` με χρήση του κατάλληλου αρχείου " "``torrc`` που μόλις δημιουργήσατε (όπως περιγράφεται σε " "``_). Όπως::" #: ../../source/tor.rst:123 msgid "You are now running a system ``tor`` process in Windows!" msgstr "Εκτελείτε πλέον μια υπηρεσία του συστήματος ``tor`` σε Windows!" #: ../../source/tor.rst:125 #, fuzzy msgid "" "Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor " "Settings tab. Under \"How should OnionShare connect to Tor?\" choose " "\"Connect using control port\", and set \"Control port\" to ``127.0.0.1``" " and \"Port\" to ``9051``. Under \"Tor authentication settings\" choose " "\"Password\" and set the password to the control port password you picked" " above. Click the \"Test Connection to Tor\" button. If all goes well, " "you should see \"Connected to the Tor controller\"." msgstr "" "Ανοίξτε το OnionShare και κάντε κλικ στο εικονίδιο \"⚙\". Κάτω από το " "\"Πώς να συνδέεται το OnionShare με το Tor;'' επιλέξτε το \"Σύνδεση μέσω " "πύλης ελέγχου\" και ορίστε τη \"Πύλη ελέγχου\" σε ``127.0.0.1`` και " "\"Θύρα\" σε ``9051``. Κάτω από το \"Ρυθμίσεις επαλήθευσης Tor\" επιλέξτε " "\"Κωδικός\" και προσθέστε τον κωδικό πρόσβασης που επιλέξατε παραπάνω. " "Κάντε κλικ στο κουμπί \"Έλεγχος της σύνδεσης με το Tor\". Εάν όλα είναι " "σωστά θα δείτε το μήνυμα \"Εγινε σύνδεση με τον ελεγκτή Tor\"." #: ../../source/tor.rst:134 msgid "Using a system ``tor`` in macOS" msgstr "Χρήση του συστήματος ``tor`` σε macOS" #: ../../source/tor.rst:136 msgid "" "First, install `Homebrew `_ if you don't already have " "it, and then install Tor::" msgstr "" "Εγκαταστήστε αρχικά το `Homebrew `_ εάν δεν το έχετε " "ήδη. Στη συνέχεια εγκαταστήστε το Tor::" #: ../../source/tor.rst:140 msgid "Now configure Tor to allow connections from OnionShare::" msgstr "Ρυθμίστε το Tor ώστε να επιτρέπει τις συνδέσεις από το OnionShare::" #: ../../source/tor.rst:147 msgid "And start the system Tor service::" msgstr "Και ξεκινήστε την υπηρεσία του συστήματος Tor::" #: ../../source/tor.rst:151 #, fuzzy msgid "" "Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor " "Settings tab. Under \"How should OnionShare connect to Tor?\" choose " "\"Connect using socket file\", and set the socket file to be " "``/usr/local/var/run/tor/control.socket``. Under \"Tor authentication " "settings\" choose \"No authentication, or cookie authentication\". Click " "the \"Test Connection to Tor\" button." msgstr "" "Ανοίξτε το OnionShare και κάντε κλικ στο εικονίδιο \"⚙\". Κάτω από το " "\"Πώς να συνδέεται το OnionShare με το Tor;'' επιλέξτε το \"Σύνδεση μέσω " "αρχείου μετάβασης\" και ορίστε το αρχείο " "``/usr/local/var/run/tor/control.socket``. Κάτω από το \"Ρυθμίσεις " "επαλήθευσης Tor\" επιλέξτε \"Χωρίς επαλήθευση ή επαλήθευση με cookie\". " "Κάντε κλικ στο κουμπί \"Έλεγχος σύνδεσης με το Tor\"." #: ../../source/tor.rst:157 ../../source/tor.rst:177 msgid "If all goes well, you should see \"Connected to the Tor controller\"." msgstr "" "εάν όλα είναι σωστά θα δείτε το μήνυμα \"Εγινε σύνδεση με τον ελεγκτή " "Tor\"." #: ../../source/tor.rst:160 msgid "Using a system ``tor`` in Linux" msgstr "Χρήση του συστήματος ``tor`` σε Linux" #: ../../source/tor.rst:162 msgid "" "First, install the ``tor`` package. If you're using Debian, Ubuntu, or a " "similar Linux distro, It is recommended to use the Tor Project's " "`official repository `_." msgstr "" "Αρχικά κάντε εγκατάσταση του πακέτου ``tor``. Εάν χρησιμοποιείται Debian," " Ubuntu ή παρόμοια έκδοση με Linux distro, προτείνεται η χρήση του Tor " "Project από το επίσημο αποθετήριο `_." #: ../../source/tor.rst:164 msgid "" "Next, add your user to the group that runs the ``tor`` process (in the " "case of Debian and Ubuntu, ``debian-tor``) and configure OnionShare to " "connect to your system ``tor``'s control socket file." msgstr "" "Στη συνέχεια, προσθέστε τον χρήστη στην ομάδα που θα εκτελεί την υπηρεσία" " ``tor`` (στην περίπτωση του Debian και Ubuntu το ``debian-tor``) και " "ρυθμίστε το OnionShare ώστε να συνδεθεί με το αρχείο μετάβασής σας στο " "σύστημα ``tor``." #: ../../source/tor.rst:166 msgid "" "Add your user to the ``debian-tor`` group by running this command " "(replace ``username`` with your actual username)::" msgstr "" "Προσθέστε τον χρήστη σας στην ομάδα ``debian-tor`` εκτελόντας την εντολή " "(αντικαταστήστε το ``όνομα χρήστη`` με το δικό σας::" #: ../../source/tor.rst:170 #, fuzzy msgid "" "Reboot your computer. After it boots up again, open OnionShare, click the" " \"⚙\" icon in it, and switch to the Tor Settings tab. Under \"How should" " OnionShare connect to Tor?\" choose \"Connect using socket file\". Set " "the socket file to be ``/var/run/tor/control``. Under \"Tor " "authentication settings\" choose \"No authentication, or cookie " "authentication\". Click the \"Test Connection to Tor\" button." msgstr "" "Επανεκκινήστε τον υπολογιστή σας. Ανοίξτε το OnionShare και κάντε κλικ " "στο εικονίδιο \"⚙\". Κάτω από το \"Πώς να συνδέεται το OnionShare με το " "Tor;\" επιλέξτε \"Σύνδεση μέσω αρχείου μετάβασης\". Ρυθμίστε το αρχείο " "στο ``/var/run/tor/control``. Κάτω από τις \"Ρυθμίσεις επαλήθευσης Tor\" " "επιλέξτε \"Χωρίς επαλήθευση ή επαλήθευση με cookie\". Κάντε κλικ στο " "κουμπί \"Έλεγχος σύνδεσης με το Tor\"." #~ msgid "Using a system Tor in Mac OS X" #~ msgstr "" #~ msgid "" #~ "There are several options for how " #~ "OnionShare should connect to Tor. You" #~ " can change them in Settings, which" #~ " you can get to by clicking the" #~ " gear icon in the bottom-right " #~ "of the window." #~ msgstr "" #~ msgid "Use Tor that is bundled with OnionShare" #~ msgstr "" #~ msgid "" #~ "This is the default way that " #~ "OnionShare connects to Tor, and it's " #~ "also the simplest and most reliable " #~ "way. For this reason, it's recommended" #~ " for most users." #~ msgstr "" #~ msgid "" #~ "When you open OnionShare, it will " #~ "launch a Tor process in the " #~ "background that's configured specifically for" #~ " OnionShare to use. This Tor process" #~ " won't interfere with other Tor " #~ "processes on your computer, so you're" #~ " free to run Tor Browser or use" #~ " a system Tor in the background." #~ msgstr "" #~ msgid "Attempt automatic configuration with Tor Browser" #~ msgstr "" #~ msgid "" #~ "You can configure OnionShare to connect" #~ " to the Tor that comes with Tor" #~ " Browser. First, `download Tor Browser " #~ "`_ here if you " #~ "don't already have it. With this " #~ "setting selected, you need to keep " #~ "Tor Browser open in the background " #~ "while you're using OnionShare." #~ msgstr "" #~ msgid "Using a system Tor in Windows" #~ msgstr "" #~ msgid "" #~ "Download the Tor Windows Expert Bundle," #~ " which you can get `from here " #~ "`_. Extract the" #~ " zip file and copy the extracted " #~ "folder to ``C:\\Program Files (x86)\\``, " #~ "and rename the folder to ``tor-" #~ "win32``, so that inside that folder " #~ "is the ``Data`` and ``Tor`` folders." #~ msgstr "" #~ msgid "" #~ "Make up a control port password. " #~ "I'm going to use ``comprised stumble " #~ "rummage work avenging construct volatile`` " #~ "as my password. Now open a command" #~ " prompt as an administrator, and use" #~ " ``tor.exe --hash-password`` to generate" #~ " a hash of your password. For " #~ "example::" #~ msgstr "" #~ msgid "" #~ "The hashed password output is displayed" #~ " after some warnings (which you can" #~ " ignore). In my case, it was " #~ "``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``." #~ msgstr "" #~ msgid "" #~ "Now create a new text file at " #~ "``C:\\Program Files (x86)\\tor-win32\\torrc`` " #~ "and put this in it, replacing the" #~ " ``HashedControlPassword`` with the one you" #~ " just generated::" #~ msgstr "" #~ msgid "" #~ "In your administrator command prompt, " #~ "install tor as a service using the" #~ " appropriate ``torrc`` file you just " #~ "created (see `here " #~ "`_ " #~ "for more information on doing this). " #~ "Like this::" #~ msgstr "" #~ msgid "You're now running a system Tor in Windows!" #~ msgstr "" #~ msgid "" #~ "Open OnionShare. Click the Settings " #~ "icon. Under \"How should OnionShare " #~ "connect to Tor?\" choose \"Connect using" #~ " control port\", and set the control" #~ " port host to ``127.0.0.1`` and the" #~ " port to ``9051``. Under \"Tor " #~ "authentication options\" choose \"Password\" " #~ "and set the password to your " #~ "password, in my case ``comprised stumble" #~ " rummage work avenging construct " #~ "volatile``. Click the \"Test Settings\" " #~ "button. If all goes well, you " #~ "should see successfully connected to " #~ "tor." #~ msgstr "" #~ msgid "Using a system Tor in macOS" #~ msgstr "" #~ msgid "" #~ "First, install `Homebrew `_ " #~ "if you don't already have it. " #~ "Then, install Tor::" #~ msgstr "" #~ msgid "" #~ "Open OnionShare. Click the Settings " #~ "icon. Under \"How should OnionShare " #~ "connect to Tor?\" choose \"Connect using" #~ " socket file\", and set the socket" #~ " file to be " #~ "``/usr/local/var/run/tor/control.socket``. Under \"Tor " #~ "authentication options\" choose \"No " #~ "authentication, or cookie authentication\". " #~ "Click the \"Test Settings\" button. If" #~ " all goes well, you should see " #~ "successfully connected to tor." #~ msgstr "" #~ msgid "Using a system Tor in Linux" #~ msgstr "" #~ msgid "" #~ "First, install the tor package. If " #~ "you're using Debian, Ubuntu, or a " #~ "similar Linux distro, I recommend you" #~ " use Tor Project's `official repository " #~ "`_. For " #~ "example, in Ubuntu 20.04::" #~ msgstr "" #~ msgid "" #~ "Next, add your user to the group" #~ " that runs the Tor process (in " #~ "the case of Debian and Ubuntu, " #~ "``debian-tor``) and configure OnionShare to" #~ " connect to your system Tor's control" #~ " socket file." #~ msgstr "" #~ msgid "" #~ "Reboot your computer. After it boots " #~ "up again, open OnionShare. Click the " #~ "Settings icon. Under \"How should " #~ "OnionShare connect to Tor?\" choose " #~ "\"Connect using socket file\", and set" #~ " the socket file to be " #~ "``/var/run/tor/control``. Under \"Tor authentication" #~ " options\" choose \"No authentication, or" #~ " cookie authentication\". Click the \"Test" #~ " Settings\" button. If all goes well," #~ " you should see successfully connect " #~ "to Tor." #~ msgstr "" #~ msgid "" #~ "If your access to the internet is" #~ " censored, you can configure OnionShare " #~ "to connect to the Tor network " #~ "using `Tor bridges " #~ "`_. If " #~ "OnionShare successfully connects to Tor, " #~ "you don't need to use a bridge." #~ msgstr "" #~ msgid "To configure bridges, open OnionShare settings." #~ msgstr "" #~ msgid "" #~ "You can use the built-in obfs4 " #~ "pluggable transports, the built-in " #~ "meek_lite (Azure) pluggable transports, or " #~ "custom bridges, which you can obtain " #~ "from Tor's `BridgeDB " #~ "`_. If you need " #~ "to use a bridge, you should try" #~ " the built-in obfs4 ones first." #~ msgstr "" #~ msgid "" #~ "Download the Tor Windows Expert Bundle" #~ " `from `_. " #~ "Extract the ZIP file and copy the" #~ " extracted folder to ``C:\\Program Files" #~ " (x86)\\`` Rename the extracted folder " #~ "with ``Data`` and ``Tor`` in it to" #~ " ``tor-win32``." #~ msgstr "" #~ "Κάντε λήψη του Tor Windows Expert " #~ "Bundle `από `_." #~ " Κάντε εξαγωγή του αρχείου ΖΙΡ και" #~ " αντιγράψτε τον φάκελο σε ``C:\\Program " #~ "Files (x86)\\``. Μετονομάστε τον εξαχθέν " #~ "φάκελο σε ``Data`` και ``Tor`` μέσα " #~ "στο ``tor-win32``." #~ msgid "Use the ``tor`` bundled with OnionShare" #~ msgstr "Χρήση του κελύφους ``tor`` με το OnionShare" #~ msgid "Using Tor bridges" #~ msgstr "Χρήση γεφυρών Tor" #~ msgid "To configure bridges, click the \"⚙\" icon in OnionShare." #~ msgstr "" #~ "Για να ρυθμίσετε μια γέφυρα, κάντε " #~ "κλικ στο εικονίδιο \"⚙\" του OnionShare." #~ msgid "" #~ "You can use the built-in obfs4 " #~ "pluggable transports, the built-in " #~ "meek_lite (Azure) pluggable transports, or " #~ "custom bridges, which you can obtain " #~ "from Tor's `BridgeDB " #~ "`_. If you need " #~ "to use a bridge, try the built-" #~ "in obfs4 ones first." #~ msgstr "" #~ "Μπορείτε να χρησιμοποιήσετε τις " #~ "προεγκατεστημένες συνδέσεις obfs4, οι " #~ "ενσωματωμένες meek_lite (Azure) συνδέσεις ή" #~ " οι προσαρμοσμένες γέφυρες, τις οποίες " #~ "μπορείτε να αποκτήσετε από το Tor " #~ "`BridgeDB `_. Εάν " #~ "πρέπει να χρησιμοποιήσετε μια γέφυρα, " #~ "δοκιμάστε πρώτα τις obfs4." #~ msgid "" #~ "Pick a way to connect OnionShare " #~ "to Tor by clicking Network Settings " #~ "from the welcome screen, or the " #~ "Tor onion icon in the bottom right" #~ " of the OnionShare window to open " #~ "the Tor Settings tab." #~ msgstr "" #~ "Επιλέξτε τον τρόπο σύνδεσης του " #~ "OnionShare με το Tor, κάνοντας κλικ " #~ "στο εικονίδιο του Tor κάτω δεξιά " #~ "στο παράθυρο του OnionShare για να " #~ "ανοίξει η καρτέλα των ρυθμίσεων." #~ msgid "Getting Around Censorship" #~ msgstr "Παράκαμψη της λογοκρισίας" #~ msgid "" #~ "If your access to the internet is" #~ " censored, you can configure OnionShare " #~ "to connect to the Tor network " #~ "using `Tor bridges `_. If OnionShare " #~ "connects to Tor without one, you " #~ "don't need to use a bridge." #~ msgstr "" #~ "Εάν λογοκρίνεται η πρόσβασή σας στο " #~ "Διαδίκτυο, μπορείτε να ρυθμίσετε το " #~ "OnionShare να συνδέεται με χρήση των " #~ "`Tor bridges `_. Εάν το OnionShare" #~ " συνδέεται απευθείας στο Tor, δεν " #~ "χρειάζεται να χρησιμοποιήσετε μια γέφυρα."