Monero::AddressBookImpl Invalid destination address Ogiltig måladress Invalid payment ID. Short payment ID should only be used in an integrated address Ogiltigt betalnings-ID. Kort betalnings-ID ska endast användas i en integrerad adress Invalid payment ID Ogiltigt betalnings-ID Integrated address and long payment ID can't be used at the same time Monero::PendingTransactionImpl Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File: Försöker spara transaktion till fil, men angiven fil finns redan. Avslutar för att inte riskera att skriva över någonting. Fil: Failed to write transaction(s) to file Det gick inte att skriva transaktioner till fil daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. no connection to daemon. Please make sure daemon is running. ingen anslutning till daemonen. Se till att daemonen körs. transaction %s was rejected by daemon with status: transaktionen %s avvisades av daemonen med status: . Reason: . Orsak: Unknown exception: Okänt undantag: Unhandled exception Ohanterat undantag Monero::UnsignedTransactionImpl This is a watch only wallet Detta är en granskningsplånbok Failed to sign transaction Det gick inte att signera transaktionen Claimed change does not go to a paid address Begärd växel går inte till en betald adress Claimed change is larger than payment to the change address Begärd växel är större än betalning till växeladressen Change goes to more than one address Växel går till mer än en adress sending %s to %s skickar %s till %s with no destinations utan några mål %s change to %s %s växel till %s no change ingen växel Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s Monero::WalletImpl payment id has invalid format, expected 16 or 64 character hex string: betalnings-ID har ogiltigt format. En 16- eller 64-teckens hex-sträng förväntades: Failed to add short payment id: Det gick inte att lägga till kort betalnings-ID: daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. no connection to daemon. Please make sure daemon is running. ingen anslutning till daemonen. Se till att daemonen körs. RPC error: RPC-fel: not enough outputs for specified ring size found outputs to use Please sweep unmixable outputs. failed to get random outputs to mix det gick inte att hämta slumpmässiga utgångar att mixa not enough money to transfer, available only %s, sent amount %s inte tillräckligt med pengar för överföring, endast tillgängligt %s, skickat belopp %s failed to parse address det gick inte att parsa adressen failed to parse secret spend key det gick inte att parsa hemlig spendernyckel No view key supplied, cancelled Ingen visningsnyckel angiven, avbruten failed to parse secret view key det gick inte att parsa hemlig visningsnyckel failed to verify secret spend key det gick inte att verifiera hemlig spendernyckel spend key does not match address spendernyckel matchar inte adress failed to verify secret view key det gick inte att verifiera hemlig visningsnyckel view key does not match address visningsnyckel matchar inte adress failed to generate new wallet: det gick inte att skapa ny plånbok: Failed to send import wallet request Failed to load unsigned transactions Det gick inte att läsa in osignerade transaktioner Failed to load transaction from file Det gick inte att läsa in transaktion från fil Wallet is view only Plånboken är endast för granskning failed to save file det gick inte att spara fil Key images can only be imported with a trusted daemon Failed to import key images: det gick inte att importera nyckelavbildningar: Failed to get subaddress label: Failed to set subaddress label: failed to get random outputs to mix: %s det gick inte att hitta slumpmässiga utgångar att mixa: %s not enough money to transfer, overall balance only %s, sent amount %s not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) ej tillräckligt med pengar för överföring, endast tillgängligt %s, transaktionsbelopp %s = %s + %s (avgift) output amount utgångens belopp transaction was not constructed transaktionen konstruerades inte transaction %s was rejected by daemon with status: transaktionen %s avvisades av daemonen med status: one of destinations is zero ett av målen är noll failed to find a suitable way to split transactions det gick inte att hitta ett lämpligt sätt att dela upp transaktioner unknown transfer error: okänt överföringsfel: internal error: internt fel: unexpected error: oväntat fel: unknown error okänt fel Failed to parse txid no tx keys found for this txid inga tx-nycklar kunde hittas för detta txid Failed to parse tx key Failed to parse address Det gick inte att parsa adressen Address must not be a subaddress Rescan spent can only be used with a trusted daemon Genomsök efter spenderade kan endast användas med en betrodd daemon Wallet Failed to parse address Det gick inte att parsa adressen Failed to parse key Det gick inte att parsa nyckeln failed to verify key det gick inte att verifiera nyckeln key does not match address nyckeln matchar inte adressen command_line yes ja no cryptonote::rpc_args Specify IP to bind RPC server Specify username[:password] required for RPC server Ange användarnamn[:lösenord] som krävs av RPC-servern Confirm rpc-bind-ip value is NOT a loopback (local) IP Bekräftelsevärde för rpc-bind-ip är INTE ett lokalt (loopback) IP Specify a comma separated list of origins to allow cross origin resource sharing Invalid IP address given for -- Ogiltig IP-adress angiven för -- permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- tillåter inkommande okrypterade externa anslutningar. Överväg att använda SSH-tunnel eller SSL-proxy istället. Åsidosätt med -- Username specified with -- Användarnamn angivet med -- cannot be empty kan inte vara tomt requires RFC server password -- cryptonote::simple_wallet Commands: Kommandon: failed to read wallet password det gick inte att läsa lösenord för plånboken invalid password ogiltigt lösenord set seed: needs an argument. available options: language set seed: behöver ett argument. tillgängliga alternativ: språk set: unrecognized argument(s) set: okända argument wallet file path not valid: ogiltig sökväg till plånbok: Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. Försöker skapa eller återställa plånbok, men angivna filer existerar. Avslutar för att inte riskera att skriva över någonting. usage: payment_id användning: payment_id needs an argument kräver ett argument 0 or 1 0 eller 1 0, 1, 2, 3, or 4 0, 1, 2, 3 eller 4 unsigned integer positivt heltal NOTE: the following 25 words can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. OBSERVERA: följande 25 ord kan användas för att återfå tillgång till din plånbok. Skriv ner och spara dem på ett säkert ställe. Spara dem inte i din e-post eller på något lagringsutrymme som du inte har direkt kontroll över. --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file --restore-deterministic-wallet använder --generate-new-wallet, inte --wallet-file specify a recovery parameter with the --electrum-seed="words list here" ange en återställningsparameter med --electrum-seed="ordlista här" specify a wallet path with --generate-new-wallet (not --wallet-file) ange sökväg till en plånbok med --generate-new-wallet (inte --wallet-file) wallet failed to connect to daemon: plånboken kunde inte ansluta till daemonen: Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. Daemonen använder en högre version av RPC (%u) än plånboken (%u): %s. Antingen uppdatera en av dem, eller använd --allow-mismatched-daemon-version. List of available languages for your wallet's seed: Lista över tillgängliga språk för din plånboks frö: Enter the number corresponding to the language of your choice: Ange det tal som motsvarar det språk du vill använda: You had been using a deprecated version of the wallet. Please use the new seed that we provide. Du hade använt en inaktuell version av plånboken. Använd det nya frö som vi tillhandahåller. Generated new wallet: Ny plånbok skapad: failed to generate new wallet: det gick inte att skapa ny plånbok: Opened watch-only wallet Öppnade plånbok för granskning Opened wallet Öppnade plånbok You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. Du hade använt en inaktuell version av plånboken. Fortsätt för att uppgradera din plånbok. You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. Du hade använt en inaktuell version av plånboken. Plånbokens filformat kommer nu att uppgraderas. failed to load wallet: det gick inte att läsa in plånboken: Use the "help" command to see the list of available commands. Använd kommandot "help" för att se en lista över tillgängliga kommandon. Wallet data saved Plånboksdata sparades Mining started in daemon Brytning startad i daemonen mining has NOT been started: brytning har INTE startats: Mining stopped in daemon Brytning stoppad i daemonen mining has NOT been stopped: brytning har INTE stoppats: Blockchain saved Blockkedjan sparad Height Höjd transaction transaktion spent spenderad unsupported transaction format transaktionsformatet stöds inte Starting refresh... Startar uppdatering … Refresh done, blocks received: Uppdatering färdig, mottagna block: payment id has invalid format, expected 16 or 64 character hex string: betalnings-ID har ogiltigt format. En 16- eller 64-teckens hex-sträng förväntades: bad locked_blocks parameter: dålig parameter för locked_blocks: a single transaction cannot use more than one payment id: en enstaka transaktion kan inte använda mer än ett betalnings-ID: failed to set up payment id, though it was decoded correctly det gick inte att upprätta betalnings-ID, trots att det avkodades korrekt transaction cancelled. transaktion avbröts. Is this okay anyway? (Y/Yes/N/No): There is currently a %u block backlog at that fee level. Is this okay? (Y/Yes/N/No): Failed to check for backlog: Transaction Spending from address index %d WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. Sending %s. Skickar %s. Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s Transaktionen behöver delas upp i %llu transaktioner. Detta kommer att göra att en transaktionsavgift läggs till varje transaktion, med ett totalt belopp på %s The transaction fee is %s Transaktionsavgiften är %s , of which %s is dust from change , varav %s är damm från växel . . A total of %s from dust change will be sent to dust address Ett total belopp på %s från växeldamm kommer att skickas till damm-adressen . This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) . Denna transaktion kommer att låsas upp vid block %llu, om ungefär %s dagar (förutsatt en blocktid på 2 minuter) Failed to write transaction(s) to file Det gick inte att skriva transaktioner till fil Unsigned transaction(s) successfully written to file: Osignerade transaktioner skrevs till fil: No unmixable outputs found Inga omixbara utgångar kunde hittas No address given Ingen adress har angivits invalid amount threshold ogiltig beloppströskel Claimed change does not go to a paid address Begärd växel går inte till en betald adress Claimed change is larger than payment to the change address Begärd växel är större än betalning till växeladressen sending %s to %s skickar %s till %s with no destinations utan några mål Failed to sign transaction Det gick inte att signera transaktionen Failed to sign transaction: Det gick inte att signera transaktion: Failed to load transaction from file Det gick inte att läsa in transaktion från fil RPC error: RPC-fel: wallet is watch-only and has no spend key plånboken är enbart för granskning och har ingen spendernyckel Your original password was incorrect. Ditt ursprungliga lösenord var fel. Error with wallet rewrite: Fel vid återskrivning av plånbok: priority must be 0, 1, 2, 3, or 4 prioritet måste vara 0, 1, 2, 3 eller 4 invalid unit ogiltig enhet invalid count: must be an unsigned integer ogiltigt värde för count: måste vara ett heltal utan tecken invalid value ogiltigt värde usage: set_log <log_level_number_0-4> | <categories> användning: set_log <loggnivå_nummer_0-4> | <kategorier> (Y/Yes/N/No): (J/Ja/N/Nej): bad m_restore_height parameter: dålig parameter för m_restore_height: date format must be YYYY-MM-DD datumformat måste vara ÅÅÅÅ-MM-DD Restore height is: Återställningshöjd är: Is this okay? (Y/Yes/N/No): Är detta okej? (J/Ja/N/Nej): Daemon is local, assuming trusted Daemonen är lokal, utgår från att den är betrodd Password for new watch-only wallet Lösenord för ny granskningsplånbok invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to ogiltiga argument. Använd start_mining [<antal_trådar>] [do_bg_mining] [ignore_battery], <antal_trådar> ska vara från 1 till internal error: internt fel: unexpected error: oväntat fel: unknown error okänt fel refresh failed: det gick inte att att uppdatera: Blocks received: Mottagna block: unlocked balance: upplåst saldo: amount belopp false Unknown command: Command usage: Command description: wallet is multisig but not yet finalized Enter optional seed encryption passphrase, empty to see raw seed Failed to retrieve seed wallet is multisig and has no seed Cannot connect to daemon Current fee is %s monero per kB Error: failed to estimate backlog array size: Error: bad estimated backlog array size (current) %u block (%u minutes) backlog at priority %u%s %u to %u block (%u to %u minutes) backlog at priority %u No backlog at priority This wallet is already multisig wallet is watch-only and cannot be made multisig This wallet has been used before, please use a new wallet to create a multisig wallet Your password is incorrect. Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants usage: make_multisig <threshold> <multisiginfo1> [<multisiginfo2>...] Invalid threshold Another step is needed Send this multisig info to all other participants, then use finalize_multisig <info1> [<info2>...] with others' multisig info Error creating multisig: Error creating multisig: new wallet is not multisig multisig address: This wallet is not multisig This wallet is already finalized usage: finalize_multisig <multisiginfo1> [<multisiginfo2>...] Failed to finalize multisig Failed to finalize multisig: This multisig wallet is not yet finalized usage: export_multisig_info <filename> Error exporting multisig info: Multisig info exported to usage: import_multisig_info <filename1> [<filename2>...] - one for each other participant Multisig info imported Failed to import multisig info: Failed to update spent status after importing multisig info: Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" This is not a multisig wallet usage: sign_multisig <filename> Failed to sign multisig transaction Multisig error: Failed to sign multisig transaction: It may be relayed to the network with submit_multisig usage: submit_multisig <filename> Failed to load multisig transaction from file Multisig transaction signed by only %u signers, needs %u more signatures Transaction successfully submitted, transaction You can check its status by using the `show_transfers` command. usage: export_raw_multisig <filename> Failed to export multisig transaction to file Saved exported multisig transaction file(s): ring size must be an integer >= could not change default ring size priority must be 0, 1, 2, 3, or 4 prioritet måste vara 0, 1, 2, 3 eller 4 {0, 1, 2, 3,?} {4?} Invalid height start_mining [<number_of_threads>] [bg_mining] [ignore_battery] Start mining in the daemon (bg_mining and ignore_battery are optional booleans). Stop mining in the daemon. set_daemon <host>[:<port>] Set another daemon to connect to. Save the current blockchain data. Synchronize the transactions and balance. balance [detail] Show the wallet's balance of the currently selected account. incoming_transfers [available|unavailable] [verbose] [index=<N1>[,<N2>[,...]]] Show the incoming transfers, all or filtered by availability and address index. payments <PID_1> [<PID_2> ... <PID_N>] Show the payments for the given payment IDs. Show the blockchain height. transfer_original [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] Transfer <amount> to <address> using an older transaction building algorithm. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) locked_transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <addr> <amount> <lockblocks> [<payment_id>] Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) Send all unmixable outputs to yourself with ring_size 1 sweep_all [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. sweep_below <amount_threshold> [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] Send all unlocked outputs below the threshold to an address. sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] Send a single output of the given key image to an address without change. donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] Donate <amount> to the development team (donate.getmonero.org). sign_transfer <file> Sign a transaction from a <file>. Submit a signed transaction from a file. set_log <level>|{+,-,}<categories> Change the current log detail (level must be <0-4>). account account new <label text with white spaces allowed> account switch <index> account label <index> <label text with white spaces allowed> account tag <tag_name> <account_index_1> [<account_index_2> ...] account untag <account_index_1> [<account_index_2> ...] account tag_description <tag_name> <description> If no arguments are specified, the wallet shows all the existing accounts along with their balances. If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). If the "switch" argument is specified, the wallet switches to the account specified by <index>. If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed>] If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the walllet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. integrated_address [<payment_id> | <address>] Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID address_book [(add ((<address> [pid <id>])|<integrated address>) [<description possibly with whitespaces>])|(delete <index>)] Print all entries in the address book, optionally adding/deleting an entry to/from it. Save the wallet data. Save a watch-only keys file. Display the private view key. Display the private spend key. Display the Electrum-style mnemonic seed set <option> [<value>] Available options: seed language Set the wallet's seed language. always-confirm-transfers <1|0> Whether to confirm unsplit txes. print-ring-members <1|0> Whether to print detailed information about ring members during confirmation. store-tx-info <1|0> Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. default-ring-size <n> Set the default ring size (default and minimum is 5). auto-refresh <1|0> Whether to automatically synchronize new blocks from the daemon. refresh-type <full|optimize-coinbase|no-coinbase|default> Set the wallet's refresh behaviour. priority [0|1|2|3|4] Set the fee too default/unimportant/normal/elevated/priority. confirm-missing-payment-id <1|0> ask-password <1|0> unit <monero|millinero|micronero|nanonero|piconero> Set the default monero (sub-)unit. min-outputs-count [n] Try to keep at least that many outputs of value at least min-outputs-value. min-outputs-value [n] Try to keep at least min-outputs-count outputs of at least that value. merge-destinations <1|0> Whether to merge multiple payments to the same destination address. confirm-backlog <1|0> Whether to warn if there is transaction backlog. confirm-backlog-threshold [n] Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. refresh-from-block-height [n] Set the height before which to ignore blocks. auto-low-priority <1|0> Whether to automatically use the low priority fee level when it's safe to do so. Display the encrypted Electrum-style mnemonic seed. Rescan the blockchain for spent outputs. get_tx_key <txid> Get the transaction key (r) for a given <txid>. check_tx_key <txid> <txkey> <address> Check the amount going to <address> in <txid>. get_tx_proof <txid> <address> [<message>] Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. check_tx_proof <txid> <address> <signature_file> [<message>] Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. get_spend_proof <txid> [<message>] Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. check_spend_proof <txid> <signature_file> [<message>] Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. get_reserve_proof (all|<amount>) [<message>] Generate a signature proving that you own at least this much, optionally with a challenge string <message>. If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. check_reserve_proof <address> <signature_file> [<message>] Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. show_transfers [in|out|pending|failed|pool] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] Show the incoming/outgoing transfers within an optional height range. unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] Show the unspent outputs of a specified address within an optional amount range. Rescan the blockchain from scratch. set_tx_note <txid> [free text note] Set an arbitrary string note for a <txid>. get_tx_note <txid> Get a string note for a txid. set_description [free text note] Set an arbitrary description for the wallet. Get the description of the wallet. Show the wallet's status. Show the wallet's information. sign <file> Sign the contents of a file. verify <filename> <address> <signature> Verify a signature on the contents of a file. export_key_images <file> Export a signed set of key images to a <file>. import_key_images <file> Import a signed key images list and verify their spent status. export_outputs <file> Export a set of outputs owned by this wallet. import_outputs <file> Import a set of outputs owned by this wallet. show_transfer <txid> Show information about a transfer to/from this address. Change the wallet's password. Generate a new random full size payment id. These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. Print the information about the current fee and transaction backlog. Export data needed to create a multisig wallet make_multisig <threshold> <string1> [<string>...] Turn this wallet into a multisig wallet finalize_multisig <string> [<string>...] Turn this wallet into a multisig wallet, extra step for N-1/N wallets export_multisig_info <filename> Export multisig info for other participants import_multisig_info <filename> [<filename>...] Import multisig info from other participants sign_multisig <filename> Sign a multisig transaction from a file submit_multisig <filename> Submit a signed multisig transaction from a file export_raw_multisig_tx <filename> Export a signed multisig transaction to a file help [<command>] Show the help section or the documentation about a <command>. integer >= block height No wallet found with that name. Confirm creation of new wallet named: can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name" and --generate-from-json="jsonfilename" can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file specify a recovery parameter with the --electrum-seed="multisig seed here" Multisig seed failed verification Enter seed encryption passphrase, empty if none This address is a subaddress which cannot be used here. Error: expected M/N, but got: Error: expected N > 1 and N <= M, but got: Error: M/N is currently unsupported. Generating master wallet from %u of %u multisig wallet keys failed to parse secret view key det gick inte att parsa hemlig visningsnyckel failed to verify secret view key det gick inte att verifiera hemlig visningsnyckel Secret spend key (%u of %u): Error: M/N is currently unsupported Restore height Still apply restore height? (Y/Yes/N/No): Warning: using an untrusted daemon at %s, privacy will be lessened Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. invalid language choice entered. Please try again. Your wallet has been generated! To start synchronizing with the daemon, use the "refresh" command. Use the "help" command to see the list of available commands. Use "help <command>" to see a command's documentation. Always use the "exit" command when closing monero-wallet-cli to save your current session's state. Otherwise, you might need to synchronize your wallet again (your wallet keys are NOT at risk in any case). failed to generate new mutlisig wallet Generated new %u/%u multisig wallet: Opened %u/%u multisig wallet%s Use "help <command>" to see a command's documentation. wallet is multisig and cannot save a watch-only version missing daemon URL argument Unexpected array length - Exited simple_wallet::set_daemon() This does not seem to be a valid daemon URL. txid idx (Some owned outputs have partial key images - import_multisig_info needed) Currently selected account: [ ] Tag: (No tag assigned) Balance per address: Address Balance Unlocked balance Outputs Label %8u %6s %21s %21s %7u %21s usage: balance [detail] usage: incoming_transfers [available|unavailable] [verbose] [index=<N>] spent spenderad global index globalt index tx id tx-ID addr index No incoming transfers Inga inkommande överföringar No incoming available transfers Inga inkommande tillgängliga överföringar No incoming unavailable transfers Inga inkommande otillgängliga överföringar Transaction successfully saved to , txid Failed to save transaction to payment betalning transaction transaktion height höjd unlock time upplåsningstid No payments with id Inga betalningar med ID failed to get blockchain height: det gick inte att hämta blockkedjans höjd: failed to connect to the daemon det gick inte att ansluta till daemonen Transaction %llu/%llu: txid=%s Transaktion %llu/%llu: txid=%s Input %llu/%llu: amount=%s Ingång %llu/%llu: belopp=%s failed to get output: det gick inte att hämta utgång: output key's originating block height shouldn't be higher than the blockchain height utgångsnyckelns ursprungsblockhöjd får inte vara högre än blockkedjans höjd Originating block heights: Ursprungsblockhöjder: | | | | Warning: Some input keys being spent are from Varning: Några ingångsnycklar som spenderas kommer från , which can break the anonymity of ring signature. Make sure this is intentional! , vilket kan bryta ringsignaturens anonymitet. Se till att detta är avsiktligt! wrong number of arguments fel antal argument No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): Inget betalnings-ID har inkluderats med denna transaktion. Är detta okej? (J/Ja/N/Nej): No outputs found, or daemon is not ready Inga utgångar hittades, eller så är daemonen inte redo Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): Sveper upp %s i %llu transaktioner för en total avgift på %s. Är detta okej? (J/Ja/N/Nej): Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): Sveper upp %s för en total avgift på %s. Är detta okej? (J/Ja/N/Nej): Donating Donerar This is a watch only wallet Detta är en granskningsplånbok usage: show_transfer <txid> användning: show_transfer <transaktions-ID> Double spend seen on the network: this transaction may or may not end up being mined Transaction ID not found Transaktions-ID kunde inte hittas true sant failed to parse refresh type det gick inte att parsa uppdateringstyp wallet is watch-only and has no seed plånboken är enbart för granskning och saknar frö wallet is non-deterministic and has no seed plånboken är icke-deterministisk och saknar frö wallet is watch-only and cannot transfer plånboken är enbart för granskning och kan inte göra överföringar could not change default priority Det gick inte att ändra standardinställning för prioritet full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) full (långsammast, inga antaganden); optimize-coinbase (snabb, antar att hela coinbase-transaktionen betalas till en enda adress); no-coinbase (snabbast, antar att ingen coinbase-transaktion tas emot), default (samma som optimize-coinbase) monero, millinero, micronero, nanonero, piconero monero, millinero, micronero, nanonero, piconero Wallet name not valid. Please try again or use Ctrl-C to quit. Plånbokens namn ej giltigt. Försök igen eller använd Ctrl-C för att avsluta. Wallet and key files found, loading... Plånbok och nyckelfil hittades, läser in … Key file found but not wallet file. Regenerating... Nyckelfil hittades men inte plånboksfilen. Återskapar … Key file not found. Failed to open wallet: Nyckelfilen kunde inte hittas. Det gick inte att öppna plånbok: Generating new wallet... Skapar ny plånbok … Electrum-style word list failed verification det gick inte att verifiera ordlista av Electrum-typ No data supplied, cancelled Ingen data angiven, avbryter failed to parse address det gick inte att parsa adressen failed to parse view key secret key det gick inte att parsa hemlig visningsnyckel failed to verify view key secret key det gick inte att verifiera hemlig visningsnyckel view key does not match standard address visningsnyckel matchar inte standardadress account creation failed det gick inte att skapa konto failed to parse spend key secret key det gick inte att parsa spendernyckel hemlig nyckel failed to verify spend key secret key det gick inte att verifiera spendernyckel hemlig nyckel spend key does not match standard address spendernyckel matchar inte standardadress failed to open account det gick inte att öppna konto wallet is null plånbok är null View key: Visningsnyckel: You may want to remove the file "%s" and try again Du kan också vilja ta bort filen "%s" och försöka igen failed to deinitialize wallet det gick inte att avinitiera plånboken this command requires a trusted daemon. Enable with --trusted-daemon detta kommando kräver en betrodd daemon. Aktivera med --trusted-daemon blockchain can't be saved: blockkedjan kan inte sparas: daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. no connection to daemon. Please make sure daemon is running. ingen anslutning till daemonen. Se till att daemonen körs. refresh error: fel vid uppdatering: Balance: Saldo: pubkey öppen nyckel key image nyckelavbildning unlocked upplåst ringct ringct T S F F locked låst RingCT RingCT - - expected at least one payment ID payment ID has invalid format, expected 16 or 64 character hex string: betalnings-ID har ogiltigt format, en 16- eller 64-teckens hex-sträng förväntades: failed to get spent status det gick inte att hämta spenderingsstatus the same transaction samma transaktion blocks that are temporally very close block som ligger väldigt nära varandra i tiden Ring size must not be 0 ring size %u is too small, minimum is %u Locked blocks too high, max 1000000 (˜4 yrs) Låsta block för högt, max 1000000 (˜~4 år) Good signature Bra signatur Bad signature Dålig signatur usage: integrated_address [payment ID] användning: integrated_address [betalnings-ID] Standard address: Standardadress: failed to parse payment ID or address det gick inte att parsa betalnings-ID eller adress usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] användning: address_book [(add (<adress> [pid <långt eller kort betalnings-ID>])|<Integrerad adress> [<beskrivning eventuellt med blanktecken>])|(delete <index>)] failed to parse payment ID det gick inte att parsa betalnings-ID failed to parse index det gick inte att parsa index Address book is empty. Adressboken är tom. Index: Index: Address: Adress: Payment ID: Betalnings-ID: Description: Beskrivning: usage: set_tx_note [txid] free text note användning: set_tx_note [txid] fri textanteckning usage: get_tx_note [txid] användning: get_tx_note [txid] usage: sign <filename> användning: sign <filnamn> wallet is watch-only and cannot sign plånboken är enbart för granskning och kan inte signera failed to read file det gick inte att läsa filen usage: check_tx_proof <txid> <address> <signature_file> [<message>] failed to load signature file usage: get_spend_proof <txid> [<message>] wallet is watch-only and cannot generate the proof usage: check_spend_proof <txid> <signature_file> [<message>] usage: get_reserve_proof (all|<amount>) [<message>] The reserve proof can be generated only by a full wallet usage: check_reserve_proof <address> <signature_file> [<message>] Address must not be a subaddress Good signature -- total: %s, spent: %s, unspent: %s usage: show_transfers [in|out|all|pending|failed] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [Double spend seen on the network: this transaction may or may not end up being mined] usage: unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] There is no unspent output in the specified address (no daemon) (out of sync) (Untitled account) failed to parse index: specify an index between 0 and usage: account account new <label text with white spaces allowed> account switch <index> account label <index> <label text with white spaces allowed> account tag <tag_name> <account_index_1> [<account_index_2> ...] account untag <account_index_1> [<account_index_2> ...] account tag_description <tag_name> <description> Grand total: Balance: , unlocked balance: Untagged accounts: Tag %s is unregistered. Accounts with tag: Tag's description: Account %c%8u %6s %21s %21s %21s ---------------------------------------------------------------------------------- %15s %21s %21s Primary address (used) (Untitled address) <index_min> is already out of bound <index_max> exceeds the bound usage: address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed> ] Integrated addresses can only be created for account 0 Integrated address: %s, payment ID: %s Subaddress: usage: get_description no description found description found: Filename: Watch only %u/%u multisig%s Normal Type: Testnet: Yes No This wallet is multisig and cannot sign usage: verify <filename> <address> <signature> användning: verify <filnamn> <adress> <signatur> Bad signature from Dålig signatur från Good signature from Bra signatur från usage: export_key_images <filename> användning: export_key_images <filnamn> wallet is watch-only and cannot export key images plånboken är enbart för granskning och kan inte exportera nyckelavbildningar failed to save file det gick inte att spara fil Signed key images exported to Signerade nyckelavbildningar exporterades till usage: import_key_images <filename> användning: import_key_images <filnamn> usage: export_outputs <filename> användning: export_outputs <filnamn> Outputs exported to Utgångar exporterades till usage: import_outputs <filename> användning: import_outputs <filnamn> amount is wrong: beloppet är fel: expected number from 0 to förväntades: ett tal från 0 till Sweeping Sveper upp Money successfully sent, transaction: Pengar skickades, transaktion: Change goes to more than one address Växel går till mer än en adress %s change to %s %s växel till %s no change ingen växel Transaction successfully signed to file Transaktionen signerades till fil failed to parse Payment ID usage: sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] failed to parse key image No outputs found Multiple transactions are created, which is not supposed to happen The transaction uses multiple or no inputs, which is not supposed to happen missing threshold amount donations are not enabled on the testnet usage: donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] dummy output(s) Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? (Y/Yes/N/No): This is a multisig wallet, it can only sign with sign_multisig usage: sign_transfer [export] Transaction raw hex data exported to usage: get_tx_key <txid> användning: get_tx_key <transaktions-ID> failed to parse txid det gick inte att parsa transaktions-id Tx key: Tx-nyckel: no tx keys found for this txid inga tx-nycklar kunde hittas för detta txid usage: get_tx_proof <txid> <address> [<message>] signature file saved to: failed to save signature file usage: check_tx_key <txid> <txkey> <address> användning: check_tx_key <txid> <txnyckel> <adress> failed to parse tx key det gick inte att parsa transaktionsnyckeln error: fel: received mottaget in txid i transaktions-id received nothing in txid tog emot ingenting i transaktions-id WARNING: this transaction is not yet included in the blockchain! VARNING: denna transaktion är ännu inte inkluderad i blockkedjan! This transaction has %u confirmations Transaktionen har %u bekräftelser WARNING: failed to determine number of confirmations! VARNING: det gick inte att avgöra antal bekräftelser! bad min_height parameter: dålig parameter för min_height: bad max_height parameter: dålig parameter för max_height: in in out ut failed misslyckades pending väntar <min_amount> should be smaller than <max_amount> <min_belopp> måste vara mindre än <max_belopp> Amount: Belopp: , number of keys: , antal nycklar: Min block height: Minblockhöjd: Max block height: Maxblockhöjd: Min amount found: Minbelopp funnet: Max amount found: Maxbelopp funnet: Total count: Totalt antal: Bin size: Storlek för binge: Outputs per *: Utgångar per *: count ^ antal ^ | | + + +--> block height +--> blockhöjd ^ ^ ^ ^ wallet plånbok Random payment ID: Slumpmässigt betalnings-ID: Matching integrated address: Matchande integrerad adress: genms Base filename (-1, -2, etc suffixes will be appended as needed) Give threshold and participants at once as M/N How many participants wil share parts of the multisig wallet How many signers are required to sign a valid transaction Create testnet multisig wallets Generating %u %u/%u multisig wallets Error verifying multisig extra info Error finalizing multisig Generated multisig wallets for address Error creating multisig wallets: This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other Error: expected N/M, but got: Error: either --scheme or both of --threshold and --participants may be given Error: expected N > 1 and N <= M, but got N==%u and M==%d Error: --filename-base is required Error: unsupported scheme: only N/N and N-1/N are supported sw Generate new wallet and save it to <arg> Skapa ny plånbok och spara den till <arg> Generate incoming-only wallet from view key Skapa granskningsplånbok från visningsnyckel Generate deterministic wallet from spend key Generate wallet from private keys Skapa plånbok från privata nycklar Generate a master wallet from multisig wallet keys Language for mnemonic Specify Electrum seed for wallet recovery/creation Ange Electrum-frö för att återställa/skapa plånbok Recover wallet using Electrum-style mnemonic seed Återställ plånbok genom användning av minnesfrö (Electrum-typ) Recover multisig wallet using Electrum-style mnemonic seed Generate non-deterministic view and spend keys Skapa non-deterministic visnings- och spendernyckel Enable commands which rely on a trusted daemon Aktivera kommandon som kräver en betrodd daemon Allow communicating with a daemon that uses a different RPC version Tillåt kommunikation med en daemon som använder en annan version av RPC Restore from specific blockchain height Återställ från angiven blockkedjehöjd The newly created transaction will not be relayed to the monero network daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. possibly lost connection to daemon anslutning till daemonen kan ha tappats Error: Fel: This is the command line monero wallet. It needs to connect to a monero daemon to work correctly. Failed to initialize wallet Det gick inte att initiera plånbok tools::wallet2 Use daemon instance at <host>:<port> Använd daemoninstans på <värddator>:<port> Use daemon instance at host <arg> instead of localhost Använd daemon-instansen på värddator <arg> istället för localhost Wallet password file Lösenordsfil för plånboken Use daemon instance at port <arg> instead of 18081 Använd daemon-instansen på port <arg> istället för 18081 For testnet. Daemon must also be launched with --testnet flag För testnet. Daemonen måste också startas med flaggan --testnet Restricts to view-only commands Begränsar till granskningskommandon can't specify daemon host or port more than once det går inte ange värd eller port för daemonen mer än en gång can't specify more than one of --password and --password-file det går inte att ange mer än en av --password och --password-file the password file specified could not be read det gick inte att läsa angiven lösenordsfil Failed to load file Det gick inte att läsa in fil Wallet password (escape/quote as needed) Lösenord för plånboken (använd escape-sekvenser eller citattecken efter behov) Specify username[:password] for daemon RPC client Ange användarnamn[:lösenord] för RPC-klient till daemonen no password specified; use --prompt-for-password to prompt for a password Failed to parse JSON Det gick inte att parsa JSON Version %u too new, we can only grok up to %u Version %u är för ny, vi förstår bara upp till %u failed to parse view key secret key det gick inte att parsa hemlig visningsnyckel failed to verify view key secret key det gick inte att verifiera hemlig visningsnyckel failed to parse spend key secret key det gick inte att parsa spendernyckel hemlig nyckel failed to verify spend key secret key det gick inte att verifiera spendernyckel hemlig nyckel Electrum-style word list failed verification det gick inte att verifiera ordlista av Electrum-typ At least one of Electrum-style word list and private view key and private spend key must be specified Both Electrum-style word list and private key(s) specified Både ordlista av Electrum-typ och privat nyckel har angivits invalid address ogiltig adress view key does not match standard address visningsnyckel matchar inte standardadress spend key does not match standard address spendernyckel matchar inte standardadress Cannot generate deprecated wallets from JSON Det går inte att skapa inaktuella plånböcker från JSON failed to parse address: Address must be specified in order to create watch-only wallet failed to generate new wallet: det gick inte att skapa ny plånbok: Primary account No funds received in this tx. failed to read file det gick inte att läsa filen tools::wallet_rpc_server Daemon is local, assuming trusted Daemonen är lokal, utgår från att den är betrodd Failed to create directory Failed to create directory %s: %s Cannot specify -- Det går inte att ange -- and -- och -- Failed to create file Det gick inte att skapa fil . Check permissions or remove file . Kontrollera behörigheter eller ta bort filen Error writing to file Fel vid skrivning till fil RPC username/password is stored in file Användarnamn/lösenord för RPC har sparats i fil Tag %s is unregistered. Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) This is the RPC monero wallet. It needs to connect to a monero daemon to work correctly. Can't specify more than one of --wallet-file and --generate-from-json Det går inte att ange mer än en av --wallet-file och --generate-from-json Must specify --wallet-file or --generate-from-json or --wallet-dir Måste ange --wallet-file eller --generate-from-json eller --wallet-dir Loading wallet... Läser in plånbok … Saving wallet... Successfully saved Successfully loaded Failed to initialize wallet RPC server Starting wallet RPC server Failed to run wallet: Stopped wallet RPC server Failed to save wallet: Wallet initialization failed: Det gick inte att initiera plånbok: wallet_args Wallet options Alternativ för plånbok Generate wallet from JSON format file Skapa plånbok från fil i JSON-format Use wallet <arg> Använd plånbok <arg> Max number of threads to use for a parallel job Max antal trådar att använda för ett parallellt jobb Specify log file Ange loggfil Config file Konfigurationsfil General options Allmänna alternativ This is the command line monero wallet. It needs to connect to a monero daemon to work correctly. Can't find config file Det gick inte att hitta konfigurationsfilen Logging to: Loggar till: Logging to %s Loggar till %s Usage: Användning: