Monero::AddressBookImpl Invalid destination address Dirección de destino inválida Payment ID supplied: this is obsolete Monero::PendingTransactionImpl Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File: Intentado guardar la transacción en un archivo, pero el archivo ya existe. Saliendo para evitar el riesgo de sobreescribir. Archivo: Failed to write transaction(s) to file Fallo al escribir la transacción o transacciones al archivo. daemon is busy. Please try again later. El daemon está ocupado. Inténtelo más tarde. no connection to daemon. Please make sure daemon is running. No hay conexión con el daemon. Asegúrese de que el daemon está ejecutándose. transaction %s was rejected by daemon with status: La transacción %s fue rechazada por el daemon con estado: . Reason: . Motivo: Unknown exception: Excepción desconocida: Unhandled exception Excepción no controlada Couldn't multisig sign data: No se pudo aplicar firma múltiple sobre los datos: Couldn't sign multisig transaction: No se pudo firmar la transacción multifirma: Monero::UnsignedTransactionImpl This is a watch only wallet Este es un monedero de solo lectura Failed to sign transaction Fallo al firmar transacción Claimed change does not go to a paid address El cambio solicitado no va a una dirección de pago Claimed change is larger than payment to the change address El cambio solicitado es mayor al pago a la dirección de cambio Change goes to more than one address El cambio va a más de una dirección sending %s to %s enviando %s a %s with no destinations sin destinos %s change to %s %s cambio a %s no change sin cambio Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s Cargando %lu de transacciones, por %s, comisiones %s, %s, %s, con tamaño mínimo de círculo %lu. %s Monero::WalletImpl daemon is busy. Please try again later. el daemon esta ocupado. Intenta más tarde. no connection to daemon. Please make sure daemon is running. no hay conexión con el daemon. Asegúrate que el daemon se esta ejecutando. RPC error: Error en el RPC: failed to get outputs to mix: %s fallo al hacer mezlcar las salidas: %s not enough outputs for specified ring size no hay salidas suficientes para el tamaño de círculo especificado found outputs to use se encontraron salidas para utilizar Please sweep unmixable outputs. Limpiar salidas sin poder mezclar. not enough money to transfer, available only %s, sent amount %s sin dinero suficiente para transferir, solamente disponible %s, cantidad enviada %s failed to parse address fallo el análisis de la dirección failed to parse secret spend key fallo al analizar la clave secreta de gasto Neither view key nor spend key supplied, cancelled Ni la clave de visualización ni la clave de gasto suministrados, cancelado failed to parse secret view key fallo al analizar la clave secreta de visualización failed to verify secret spend key fallo al verificar la clave secreta de gasto spend key does not match address la clave de gasto no coincide con la dirección failed to verify secret view key fallo al verificar la clave secreta de visualización view key does not match address la clave de visualización no coincide con la dirección failed to generate new wallet: fallo al generar nuevo monedero: Electrum seed is empty Semilla Electrum está vacía Electrum-style word list failed verification La lista de palabras del estilo Electrum fallo en la verificación Failed to send import wallet request Fallo al envío de solicitud de la importación del monedero Failed to load unsigned transactions Fallo al cargar transacciones sin firmar Failed to load transaction from file Fallo al cargar la transacción del archivo Wallet is view only Monedero es solo de visualización failed to save file Fallo al guardar archivo Key images can only be imported with a trusted daemon Las imagenes de las claves solo pueden ser importadas con un daemon de confianza Failed to import key images: Fallo al importar imagenes de las claves: Failed to get subaddress label: Fallo al obtener etiqueta de la subdirección: Failed to set subaddress label: Fallo al asignar etiqueta de la subdirección: Failed to get multisig info: Fallo al obtener información de la multifirma: Failed to make multisig: Fallo al hacer multifirma: Failed to finalize multisig wallet creation Fallo al finalizar la creación del monedero multifirma Failed to finalize multisig wallet creation: Fallo al finalizar la creación del monedero multifirma: Failed to export multisig images: Fallo al exportar imagenes de multifirma: Failed to parse imported multisig images Fallo al analizar las imagenes de la multifirma importada Failed to import multisig images: Fallo al importar imagenes de la multifirma: Failed to check for partial multisig key images: Fallo al validar por las imagenes parciales de las claves multifirma: Failed to restore multisig transaction: Fallo al restaurar la transacción multifirma: Sending all requires one destination address Destinations and amounts are unequal payment id has invalid format, expected 64 character hex string: Invalid destination address Dirección de destino inválida a single transaction cannot use more than one payment id failed to set up payment id, though it was decoded correctly Invalid output: Salida inválida: Failed to mark outputs as spent Fallo al marcar salidas como gastadas Failed to mark output as spent Fallo al marcar salida como gastada Failed to mark output as unspent Fallo al marcar salida como no gastada not enough money to transfer, overall balance only %s, sent amount %s sin dinero suficiente para transferir, balance global solamente %s, cantidad enviada %s not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) sin dinero suficiente para transferir, disponible solamente %s, cantidad de la transacción %s = %s + %s (comisión) output amount cantidad de la salida transaction was not constructed la transacción no se construyó transaction %s was rejected by daemon with status: la transacción %s fue rechazada por el daemon con status: one of destinations is zero uno de los destinos es cero failed to find a suitable way to split transactions fallo al encontrar una manera adecuada de dividir las transacciones unknown transfer error: error desconocido al transferir: internal error: error interno: unexpected error: error inesperado: unknown error error desconocido failed to get outputs to mix fallo al hacer mezclar las salidas Failed to parse txid Fallo al analizar ID de transacción no tx keys found for this txid no se encontraron claves de transacción para ésta ID de transacción Failed to parse tx key Fallo al analizar la clave de la transacción Failed to parse address Fallo al analizar dirección Address must not be a subaddress La dirección no debe ser una subdirección The wallet must be in multisig ready state El monedero debe estar en un estado listo de multifirma Given string is not a key La cadena dada no es una clave Rescan spent can only be used with a trusted daemon El reescaneo del gasto solo puede ser utilizado con un daemon de confianza Failed to parse output amount Fallo al analizar cantidad de salida Failed to parse output offset Fallo al analizar la salida desplazada Failed to parse key image Fallo al analizar la imagen de la clave Failed to get ring Fallo al obtener círculo Failed to get rings Fallo al obtener círculos Failed to set ring Fallo al asignar círculo Wallet Failed to parse address Fallo al analizar dirección Failed to parse key Fallo al analizar la clave failed to verify key fallo al verificar la clave key does not match address la clave no coincide con la dirección command_line yes si no no cryptonote::rpc_args Specify IP to bind RPC server Specify IPv6 address to bind RPC server Allow IPv6 for RPC Permitír IPv6 para RPC Ignore unsuccessful IPv4 bind for RPC Ignorar unión IPv4 no exitosa para RPC Specify username[:password] required for RPC server Confirm rpc-bind-ip value is NOT a loopback (local) IP Specify a comma separated list of origins to allow cross origin resource sharing Enable SSL on RPC connections: enabled|disabled|autodetect Path to a PEM format private key Path to a PEM format certificate Path to file containing concatenated PEM format certificate(s) to replace system CA(s). List of certificate fingerprints to allow Allow user (via --rpc-ssl-certificates) chain certificates Allow any peer certificate Invalid IP address given for -- permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- Username specified with -- cannot be empty requires RPC server password -- cryptonote::simple_wallet Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. Spending from address index %d Sending %s. Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s The transaction fee is %s , of which %s is dust from change A total of %s from dust change will be sent to dust address Not enough money in unlocked balance No address given missing lockedblocks parameter bad locked_blocks parameter failed to parse Payment ID failed to parse key image No outputs found Multiple transactions are created, which is not supposed to happen The transaction uses multiple or no inputs, which is not supposed to happen Money successfully sent, transaction: missing threshold amount invalid amount threshold Claimed change does not go to a paid address El cambio solicitado no va a una dirección de pago Claimed change is larger than payment to the change address El cambio solicitado es mayor al pago a la dirección de cambio Change goes to more than one address El cambio va a más de una dirección sending %s to %s enviando %s a %s dummy output(s) with no destinations sin destinos no change sin cambio Daemon is local, assuming trusted Password for new watch-only wallet false Commands: Unknown command: Command usage: Command description: wallet is watch-only and has no spend key command not supported by HW wallet wallet is watch-only and has no seed wallet is multisig but not yet finalized wallet is non-deterministic and has no seed Failed to retrieve seed wallet is multisig and has no seed Incorrect password Your original password was incorrect. Error with wallet rewrite: Random payment ID: Current fee is %s %s per %s Payment required, see the 'rpc_payment_info' command Error: failed to estimate backlog array size: Error: bad estimated backlog array size (current) %u block (%u minutes) backlog at priority %u%s %u to %u block (%u to %u minutes) backlog at priority %u No backlog at priority This wallet is already multisig wallet is watch-only and cannot be made multisig This wallet has been used before, please use a new wallet to create a multisig wallet Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants Invalid threshold Another step is needed Error creating multisig: Error creating multisig: new wallet is not multisig multisig address: This wallet is not multisig This wallet is already finalized Failed to finalize multisig Failed to finalize multisig: Multisig address: This multisig wallet is not yet finalized failed to save file Fallo al guardar archivo Error exporting multisig info: Multisig info exported to failed to read file Multisig info imported Failed to import multisig info: Failed to update spent status after importing multisig info: Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" This is not a multisig wallet Failed to sign multisig transaction Multisig error: Failed to sign multisig transaction: Transaction successfully signed to file It may be relayed to the network with submit_multisig Failed to load multisig transaction from file Multisig transaction signed by only %u signers, needs %u more signatures Transaction successfully submitted, transaction You can check its status by using the `show_transfers` command. unknown error error desconocido Failed to export multisig transaction to file Saved exported multisig transaction file(s): unexpected error: error inesperado: Invalid key image Invalid txid Key image either not spent, or spent with mixin 0 Failed to get key image ring: File doesn't exist Invalid ring specification: Invalid key image: Invalid ring type, expected relative or abosolute: Error reading line: Invalid ring: Invalid relative ring: Invalid absolute ring: Failed to set ring for key image: Continuing. Missing absolute or relative keyword invalid index: must be a strictly positive unsigned integer invalid index: indices wrap invalid index: indices should be in strictly ascending order failed to set ring Invalid key image or txid failed to unset ring RPC client ID: RPC client secret key: Failed to query daemon Using daemon: Payments required for node use, current credits: Credits target: Credits spent this session: Credit discrepancy this session: Difficulty: credits per hash found, credits/hash Mining for payment at %.1f H/s Estimated time till %u credits target mined: %s Mining for payment Not mining No payment needed for node use Bad argument: should be "add" Failed to open file Failed to save known rings: usage: %s <key_image>|<pubkey> Frozen: Not frozen: bytes sent bytes received No known public nodes address last_seen never Error retrieving public node list: Welcome to Monero, the private cryptocurrency. Monero, like Bitcoin, is a cryptocurrency. That is, it is digital money. Monero protects your privacy on the blockchain, and while Monero strives to improve all the time, no privacy technology can be 100% perfect, Monero included. Monero cannot protect you from malware, and it may not be as effective as we hope against powerful adversaries. Flaws in Monero may be discovered in the future, and attacks may be developed to peek under some of the layers of privacy Monero provides. Be safe and practice defense in depth. Daemon does not require payment for RPC access Starting mining for RPC access: diff %llu, %f credits/hash%s Run stop_mining_for_rpc to stop wallet is watch-only and cannot transfer ring size must be an integer >= WARNING: this is a non default ring size, which may harm your privacy. Default is recommended. could not change default ring size priority must be either 0, 1, 2, 3, or 4, or one of: could not change default priority invalid unit invalid count: must be an unsigned integer invalid value Invalid height Invalid target Invalid amount invalid argument: must be either 1/yes or 0/no Start mining in the daemon (bg_mining and ignore_battery are optional booleans). Stop mining in the daemon. Set another daemon to connect to. Save the current blockchain data. Synchronize the transactions and balance. Show the wallet's balance of the currently selected account. Show the incoming transfers, all or filtered by availability and address index. Output format: Amount, Spent("T"|"F"), "frozen"|"locked"|"unlocked", RingCT, Global Index, Transaction Hash, Address Index, [Public Key, Key Image] Show the payments for the given payment IDs. Show the blockchain height. Send all unlocked balance to an address and lock it for <lockblocks> (max. 1000000). If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. <priority> is the priority of the sweep. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Send all unmixable outputs to yourself with ring_size 1 Send all unlocked outputs below the threshold to an address. Send a single output of the given key image to an address without change. Donate <amount> to the development team (donate.getmonero.org). Sign a transaction from a file. If the parameter "export_raw" is specified, transaction raw hex data suitable for the daemon RPC /sendrawtransaction is exported. Submit a signed transaction from a file. Change the current log detail (level must be <0-4>). If no arguments are specified, the wallet shows all the existing accounts along with their balances. If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). If the "switch" argument is specified, the wallet switches to the account specified by <index>. If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the wallet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID Print all entries in the address book, optionally adding/deleting an entry to/from it. Save the wallet data. Save a watch-only keys file. Display the private view key. Display the private spend key. Display the Electrum-style mnemonic seed Display the encrypted Electrum-style mnemonic seed. Rescan the blockchain for spent outputs. Get the transaction key (r) for a given <txid>. Set the transaction key (r) for a given <txid> in case the tx was made by some other device or 3rd party wallet. Check the amount going to <address> in <txid>. Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. Generate a signature proving that you own at least this much, optionally with a challenge string <message>. If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. Show the unspent outputs of a specified address within an optional amount range. Set an arbitrary string note for a <txid>. Get a string note for a txid. Set an arbitrary description for the wallet. Get the description of the wallet. Show the wallet's status. Show the wallet's information. Sign the contents of a file. Verify a signature on the contents of a file. Import a signed key images list and verify their spent status. Attempts to reconnect HW wallet. Export a set of outputs owned by this wallet. Import a set of outputs owned by this wallet. Show information about a transfer to/from this address. Change the wallet's password. Print the information about the current fee and transaction backlog. Export data needed to create a multisig wallet Turn this wallet into a multisig wallet Turn this wallet into a multisig wallet, extra step for N-1/N wallets Export multisig info for other participants Import multisig info from other participants Sign a multisig transaction from a file Submit a signed multisig transaction from a file Export a signed multisig transaction to a file Print the ring(s) used to spend a given key image or transaction (if the ring size is > 1) Output format: Key Image, "absolute", list of rings Set the ring used for a given key image, so it can be reused in a fork Unsets the ring used for a given key image or transaction Save known rings to the shared rings database Freeze a single output by key image so it will not be used Thaw a single output by key image so it may be used again Checks whether a given output is currently frozen by key image Prints simple network stats Lists known public nodes Prints basic info about Monero for first time users Returns version information Get info about RPC payments to current node Start mining to pay for RPC access Stop mining to pay for RPC access Show the help section or the documentation about a <command>. needs an argument set seed: needs an argument. available options: language 0 or 1 integer >= full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) 0, 1, 2, 3, or 4, or one of 0|1|2 (or never|action|decrypt) monero, millinero, micronero, nanonero, piconero unsigned integer amount block height <major>:<minor> 1/yes or 0/no floating point >= 0 set: unrecognized argument(s) Wallet name not valid. Please try again or use Ctrl-C to quit. Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. Wallet and key files found, loading... Key file found but not wallet file. Regenerating... Key file not found. Failed to open wallet: No wallet found with that name. Confirm creation of new wallet named: Generating new wallet... Can't specify more than one of --testnet and --stagenet can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name", --generate-from-json="jsonfilename" and --generate-from-device="wallet_name" can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file specify a recovery parameter with the --electrum-seed="multisig seed here" specify a recovery parameter with the --electrum-seed="words list here" Multisig seed failed verification Electrum-style word list failed verification La lista de palabras del estilo Electrum fallo en la verificación No data supplied, cancelled failed to parse address fallo el análisis de la dirección This address is a subaddress which cannot be used here. failed to parse view key secret key failed to verify view key secret key view key does not match standard address account creation failed failed to parse spend key secret key failed to verify spend key secret key spend key does not match standard address Error: expected M/N, but got: Error: expected N > 1 and N <= M, but got: Error: M/N is currently unsupported. Generating master wallet from %u of %u multisig wallet keys failed to parse secret view key fallo al analizar la clave secreta de visualización failed to verify secret view key fallo al verificar la clave secreta de visualización Error: M/N is currently unsupported No restore height is specified. Assumed you are creating a new account, restore will be done from current estimated blockchain height. account creation aborted specify a wallet path with --generate-new-wallet (not --wallet-file) bad m_restore_height parameter: Restore height is: Restore height can't specify --subaddress-lookahead and --wallet-file at the same time failed to open account wallet is null Failed to initialize ring database: privacy enhancing features will be inactive wallet failed to connect to daemon: Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. List of available languages for your wallet's seed: If your display freezes, exit blind with ^C, then run again with --use-english-language-names invalid language choice entered. Please try again. invalid password You had been using a deprecated version of the wallet. Please use the new seed that we provide. Generated new wallet: View key: failed to generate new wallet: fallo al generar nuevo monedero: Your wallet has been generated! To start synchronizing with the daemon, use the "refresh" command. Use the "help" command to see the list of available commands. Use "help <command>" to see a command's documentation. Always use the "exit" command when closing monero-wallet-cli to save your current session's state. Otherwise, you might need to synchronize your wallet again (your wallet keys are NOT at risk in any case). Generated new wallet on hw device: failed to generate new mutlisig wallet Generated new %u/%u multisig wallet: wallet file path not valid: Key file not found. Failed to open wallet Opened watch-only wallet Opened %u/%u multisig wallet%s Opened wallet You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. failed to load wallet: Use the "help" command to see the list of available commands. Use "help <command>" to see a command's documentation. failed to deinitialize wallet Wallet data saved wallet is multisig and cannot save a watch-only version failed to read wallet password Watch only wallet saved as: Failed to save watch only wallet: this command requires a trusted daemon. Enable with --trusted-daemon Mining started in daemon mining has NOT been started: Mining stopped in daemon mining has NOT been stopped: Unexpected array length - Exited simple_wallet::set_daemon() Expected trusted or untrusted, got trusted untrusted This does not seem to be a valid daemon URL. Blockchain saved blockchain can't be saved: Height txid idx spent Enter password Starting refresh... New transfer received since rescan was started. Key images are incomplete. Refresh done, blocks received: daemon is busy. Please try again later. Available options: seed language Set the wallet's seed language. always-confirm-transfers <1|0> Whether to confirm unsplit txes. print-ring-members <1|0> Whether to print detailed information about ring members during confirmation. store-tx-info <1|0> Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. default-ring-size <n> Set the default ring size (obsolete). auto-refresh <1|0> Whether to automatically synchronize new blocks from the daemon. refresh-type <full|optimize-coinbase|no-coinbase|default> Set the wallet's refresh behaviour. priority [0|1|2|3|4] Set the fee to default/unimportant/normal/elevated/priority. confirm-missing-payment-id <1|0> (obsolete) ask-password <0|1|2 (or never|action|decrypt)> action: ask the password before many actions such as transfer, etc decrypt: same as action, but keeps the spend key encrypted in memory when not needed unit <monero|millinero|micronero|nanonero|piconero> Set the default monero (sub-)unit. min-outputs-count [n] Try to keep at least that many outputs of value at least min-outputs-value. min-outputs-value [n] Try to keep at least min-outputs-count outputs of at least that value. merge-destinations <1|0> Whether to merge multiple payments to the same destination address. confirm-backlog <1|0> Whether to warn if there is transaction backlog. confirm-backlog-threshold [n] Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. confirm-export-overwrite <1|0> Whether to warn if the file to be exported already exists. refresh-from-block-height [n] Set the height before which to ignore blocks. auto-low-priority <1|0> Whether to automatically use the low priority fee level when it's safe to do so. segregate-pre-fork-outputs <1|0> Set this if you intend to spend outputs on both Monero AND a key reusing fork. key-reuse-mitigation2 <1|0> Set this if you are not sure whether you will spend on a key reusing Monero fork later. subaddress-lookahead <major>:<minor> Set the lookahead sizes for the subaddress hash table. segregation-height <n> Set to the height of a key reusing fork you want to use, 0 to use default. ignore-fractional-outputs <1|0> Whether to ignore fractional outputs that result in net loss when spending due to fee. ignore-outputs-above <amount> Ignore outputs of amount above this threshold when spending. Value 0 is translated to the maximum value (18 million) which disables this filter. ignore-outputs-below <amount> Ignore outputs of amount below this threshold when spending. track-uses <1|0> Whether to keep track of owned outputs uses. setup-background-mining <1|0> Whether to enable background mining. Set this to support the network and to get a chance to receive new monero. device-name <device_name[:device_spec]> Device name for hardware wallet. export-format <"binary"|"ascii"> Save all exported files as binary (cannot be copied and pasted) or ascii (can be). persistent-client-id <1|0> Whether to keep using the same client id for RPC payment over wallet restarts. auto-mine-for-rpc-payment-threshold <float> Whether to automatically start mining for RPC payment if the daemon requires it. credits-target <unsigned int> The RPC payment credits balance to target (0 for default). RPC client secret key should be 32 byte in hex format With background mining enabled, the daemon will mine when idle and not on battery. Error checking daemon RPC access prices Error checking daemon RPC access prices: Failed to connect to daemon Daemon RPC credits/hash is less than was claimed. Either this daemon is cheating, or it changed its setup recently. Claimed: Actual: no connection to daemon. Please make sure daemon is running. payment required. RPC error: Error en el RPC: refresh error: internal error: error interno: refresh failed: Blocks received: (Some owned outputs have partial key images - import_multisig_info needed) (Some owned outputs have missing key images - import_key_images needed) Currently selected account: [ ] (No tag assigned) Tag: Balance: unlocked balance: Balance per address: Address Balance Unlocked balance Outputs Label %8u %6s %21s %21s %7u %21s pubkey key image spent unlocked ringct global index tx id addr index Used at heights: T F locked [frozen] RingCT - No incoming transfers No incoming available transfers No incoming unavailable transfers payment transaction height unlock time No payments with id payment ID has invalid format, expected 16 or 64 character hex string: failed to get blockchain height: failed to get spent status Transaction %llu/%llu: txid=%s failed to find construction data for tx input failed to get output: output key's originating block height shouldn't be higher than the blockchain height Originating block heights: | | Warning: Some input keys being spent are from the same transaction blocks that are temporally very close , which can break the anonymity of ring signature. Make sure this is intentional! Ring size must not be 0 ring size %u is too small, minimum is %u ring size %u is too large, maximum is %u wrong number of arguments payment id failed to encode Locked blocks too high, max 1000000 (˜4 yrs) failed to parse short payment ID from URI Invalid last argument: a single transaction cannot use more than one payment id failed to parse payment id, though it was detected Is this okay anyway? There is currently a %u block backlog at that fee level. Is this okay? Sweeping %s in %llu transactions for a total fee of %s. Is this okay? Sweeping %s for a total fee of %s. Is this okay? Discarding %s of unmixable outputs that cannot be spent, which can be undone by "rescan_spent". Is this okay? Failed to parse number of outputs Amount of outputs should be greater than 0 payment id has invalid format, expected 16 or 64 character hex string: el id de pago tiene un formato inválido, se espera una cadena de 16 o 64 caracteres: bad locked_blocks parameter: a single transaction cannot use more than one payment id: failed to set up payment id, though it was decoded correctly Send this multisig info to all other participants, then use exchange_multisig_keys <info1> [<info2>...] with others' multisig info Multisig wallet has been successfully created. Current wallet type: Failed to perform multisig keys exchange: Failed to load multisig transaction from MMS Failed to mark output spent: Failed to mark output unspent: Spent: Not spent: Failed to check whether output is spent: Please confirm the transaction on the device Device name not specified Device reconnect failed Device reconnect failed: Show the incoming/outgoing transfers within an optional height range. Output format: In or Coinbase: Block Number, "block"|"in", Time, Amount, Transaction Hash, Payment ID, Subaddress Index, "-", Note Out: Block Number, "out", Time, Amount*, Transaction Hash, Payment ID, Fee, Destinations, Input addresses**, "-", Note Pool: "pool", "in", Time, Amount, Transaction Hash, Payment Id, Subaddress Index, "-", Note, Double Spend Note Pending or Failed: "failed"|"pending", "out", Time, Amount*, Transaction Hash, Payment ID, Fee, Input addresses**, "-", Note * Excluding change and fee. ** Set of address indices used as inputs in this transfer. export_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<filepath>] Export to CSV the incoming/outgoing transfers within an optional height range. Rescan the blockchain from scratch. If "hard" is specified, you will lose any information which can not be recovered from the blockchain itself. Export a signed set of key images to a <filename>. Synchronizes key images with the hw wallet. Generate a new random full size payment id (obsolete). These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. Performs extra multisig keys exchange rounds. Needed for arbitrary M/N multisig wallets Interface with the MMS (Multisig Messaging System) <subcommand> is one of: init, info, signer, list, next, sync, transfer, delete, send, receive, export, note, show, set, help send_signer_config, start_auto_config, stop_auto_config, auto_config Get help about a subcommand with: help mms <subcommand>, or mms help <subcommand> Initialize and configure the MMS for M/N = number of required signers/number of authorized signers multisig Display current MMS configuration Set or modify authorized signer info (single-word label, transport address, Monero address), or list all signers List all messages Evaluate the next possible multisig-related action(s) according to wallet state, and execute or offer for choice By using 'sync' processing of waiting messages with multisig sync info can be forced regardless of wallet state Force generation of multisig sync info regardless of wallet state, to recover from special situations like "stale data" errors Initiate transfer with MMS support; arguments identical to normal 'transfer' command arguments, for info see there Delete a single message by giving its id, or delete all messages by using 'all' Send a single message by giving its id, or send all waiting messages Check right away for new messages to receive Write the content of a message to a file "mms_message_content" Send a one-line message to an authorized signer, identified by its label, or show any waiting unread notes Show detailed info about a single message Available options: auto-send <1|0> Whether to automatically send newly generated messages right away. Send completed signer config to all other authorized signers Start auto-config at the auto-config manager's wallet by issuing auto-config tokens and optionally set others' labels Delete any auto-config tokens and abort a auto-config process Start auto-config by using the token received from the auto-config manager Mark output(s) as spent so they never get selected as fake outputs in a ring Marks an output as unspent so it may get selected as a fake output in a ring Checks whether an output is marked as spent <device_name[:device_spec]> wrong number range, use: %s NOTE: the following %s can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. string 25 words Secret spend key (%u of %u) Use --restore-height or --restore-date if you want to restore an already setup account from a specific height. Is this okay? Still apply restore height? Enter the number corresponding to the language of your choice Device requires attention Enter device PIN Failed to read device PIN Please enter the device passphrase on the device Enter device passphrase Failed to read device passphrase The first refresh has finished for the HW-based wallet with received money. hw_key_images_sync is needed. Do you want to do it now? (Y/Yes/N/No): Unknown command '%s', try 'help' Inactivity lock timeout disabled on Windows Invalid number of seconds Export format not specified Export format not recognized. Display the restore height Lock the wallet console, requiring the wallet password to continue unsigned integer (seconds, 0 to disable) "binary" or "ascii" Warning: using an untrusted daemon at %s Using a third party daemon can be detrimental to your security and privacy Using your own without SSL exposes your RPC traffic to monitoring You are strongly encouraged to connect to the Monero network using your own daemon If you or someone you trust are operating this daemon, you can use --trusted-daemon Moreover, a daemon is also less secure when running in bootstrap mode If you are new to Monero, type "welcome" for a brief overview. Error creating wallet: Failed to query mining status: Failed to setup background mining: Background mining enabled. Thank you for supporting the Monero network. Background mining not enabled. Run "set setup-background-mining 1" to change. Using an untrusted daemon, skipping background mining check The daemon is not set up to background mine. Enabling this supports the network you are using, and makes you eligible for receiving new monero Background mining not enabled. Set setup-background-mining to 1 to change. NOTE: This transaction is locked, see details with: show_transfer hw_key_images_sync skipped. Run command manually before a transfer. Invalid keyword: Input %llu/%llu (%s): amount=%s Transaction spends more than one very old output. Privacy would be better if they were sent separately. Spend them now anyway? I locked your Monero wallet to protect you while you were away Locked due to inactivity. The wallet password is required to unlock the console. amount is wrong: expected number from 0 to transaction cancelled. No outputs found, or daemon is not ready Unlike Bitcoin, your Monero transactions and balance stay private and are not visible to the world by default. However, you have the option of making those available to select parties if you choose to. Welcome to Monero and financial privacy. For more information see https://GetMonero.org NOTE: this transaction uses an encrypted payment ID: consider using subaddresses instead WARNING: this transaction uses an unencrypted payment ID: these are obsolete and ignored. Use subaddresses instead. Failed to check for backlog: Transaction WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. . . This transaction (including %s change) will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) Unsigned transaction(s) successfully written to MMS Failed to write transaction(s) to file Fallo al escribir la transacción o transacciones al archivo. Unsigned transaction(s) successfully written to file: Failed to cold sign transaction with HW wallet No unmixable outputs found Sweeping Failed to parse donation address: Donating %s %s to %s. Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? usage: export_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<path>] direction timestamp running balance hash payment ID fee destination index note CSV exported to Rescan anyway? Warning: your restore height is higher than wallet restore height: Rescan anyway ? (Y/Yes/N/No): MMS received new message locked due to inactivity <index> is out of bounds Normal Type: Network type: Testnet Stagenet Mainnet (Y/Yes/N/No): Choose processing: Sign tx Send the tx for submission to Send the tx for signing to Submit tx unknown Choice: Wrong choice Id I/O Authorized Signer Message Type Height R Message State Since ago # Transport Address Auto-Config Token Monero Address <not set> Message In/out: State: %s since %s, %s ago Sent: Never Sent: %s, %s ago Authorized signer: Content size: bytes Content: (binary data) Send these messages now? Queued for sending. Invalid message id usage: mms init <required_signers>/<authorized_signers> <own_label> <own_transport_address> The MMS is already initialized. Re-initialize by deleting all signer info and messages? Error in the number of required signers and/or authorized signers The MMS is not active. Invalid signer number mms signer [<number> <label> [<transport_address> [<monero_address>]]] Invalid Monero address Wallet state does not allow changing Monero addresses anymore Usage: mms list Usage: mms next [sync] No next step: prepare_multisig make_multisig exchange_multisig_keys export_multisig_info import_multisig_info sign_multisig submit_multisig Send tx Process signer config Replace current signer config with the one displayed above? Process auto config data Nothing ready to process Usage: mms sync Usage: mms delete (<message_id> | all) Delete all messages? Usage: mms send [<message_id>] Usage: mms receive Usage: mms export <message_id> Message content saved to: Failed to to save message content Usage: mms note [<label> <text>] No signer found with label Usage: mms show <message_id> Usage: mms set <option_name> [<option_value>] Wrong option value Auto-send is on Auto-send is off Unknown option Usage: mms help [<subcommand>] Usage: mms send_signer_config Signer config not yet complete Usage: mms start_auto_config [<label> <label> ...] There are signers without a label set. Complete labels before auto-config or specify them as parameters here. Auto-config is already running. Cancel and restart? Usage: mms stop_auto_config Delete any auto-config tokens and stop auto-config? Usage: mms auto_config <auto_config_token> Invalid auto-config token Auto-config already running. Cancel and restart? MMS not available in this wallet The MMS is not active. Activate using the "mms init" command Invalid MMS subcommand Error in MMS command: wallet is watch-only and cannot sign This wallet is multisig and cannot sign Bad signature from Good signature from wallet is watch-only and cannot export key images Signed key images exported to command only supported by HW wallet hw wallet does not support cold KI sync Please confirm the key image sync on the device Key images synchronized to height Running untrusted daemon, cannot determine which transaction output is spent. Use a trusted daemon with --trusted-daemon and run rescan_spent spent, unspent Failed to import key images Failed to import key images: Fallo al importar imagenes de las claves: Failed to reconnect device Failed to reconnect device: Outputs exported to Double spend seen on the network: this transaction may or may not end up being mined Transaction ID not found Transaction successfully saved to , txid Failed to save transaction to true failed to parse refresh type Enter optional seed offset passphrase, empty to see raw seed Enter seed offset passphrase, empty if none You may want to remove the file "%s" and try again Donating %s %s to The Monero Project (donate.getmonero.org or %s). This is a multisig wallet, it can only sign with sign_multisig This is a watch only wallet Este es un monedero de solo lectura Failed to sign transaction Fallo al firmar transacción Failed to sign transaction: Transaction raw hex data exported to Failed to load transaction from file Fallo al cargar la transacción del archivo failed to parse txid Tx key: no tx keys found for this txid no se encontraron claves de transacción para ésta ID de transacción failed to parse tx_key Tx key successfully stored. Failed to store tx key: signature file saved to: failed to save signature file error: failed to parse tx key received in txid WARNING: this transaction is not yet included in the blockchain! WARNING: failed to determine number of confirmations! received nothing in txid failed to load signature file Good signature Bad signature wallet is watch-only and cannot generate the proof The reserve proof can be generated only by a full wallet Address must not be a subaddress La dirección no debe ser una subdirección usage: show_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] bad min_height parameter: bad max_height parameter: block in [Double spend seen on the network: this transaction may or may not end up being mined] <min_amount> should be smaller than <max_amount> There is no unspent output in the specified address Amount: , number of keys: Min block height: Max block height: Min amount found: Max amount found: Total count: Bin size: Outputs per *: count ^ | + +--> block height ^ ^ Warning: this will lose any information which can not be recovered from the blockchain. This includes destination addresses, tx secret keys, tx notes, etc Good signature -- total: %s, spent: %s, unspent: %s First line is not an amount Invalid output: Salida inválida: Invalid output key, and file doesn't exist Invalid output WARNING: from v8, ring size will be fixed and this setting will be ignored. invalid argument: must be either 0/never, 1/action, or 2/encrypt/decrypt Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or <address_2> <amount_2> etcetera (before the payment ID, if it's included) Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or <address_2> <amount_2> etcetera (before the payment ID, if it's included) Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. If the parameter "outputs=<N>" is specified and N > 0, wallet splits the transaction into N even outputs. Password needed (%s) - use the refresh command Daemon requests payment at diff %llu, with %f credits/hash%s. Run start_mining_for_rpc to start mining to pay for RPC access, or use another daemon Error mining to daemon: Failed to start mining for RPC payment wallet (no daemon) (out of sync) (Untitled account) failed to parse index: specify an index between 0 and Grand total: Balance: , unlocked balance: Untagged accounts: Tag %s is unregistered. Accounts with tag: Tag's description: Account %c%8u %6s %21s %21s %21s ---------------------------------------------------------------------------------- %15s %21s %21s Primary address (used) (Untitled address) <index_min> is already out of bound <index_max> exceeds the bound Integrated addresses can only be created for account 0 Matching integrated address: Integrated address: %s, payment ID: %s Subaddress: Standard address: failed to parse payment ID or address failed to parse index Address book is empty. Index: Address: Description: no description found description found: Filename: Watch only %u/%u multisig%s %s change to %s %s cambio a %s This transaction has %u confirmations gencert Filename to save the certificate Filename to save the private key Passphrase with which to encrypt the private key File containing the passphrase with which to encrypt the private key Prompt for a passphrase with which to encrypt the private key Argument is needed: Failed to read passphrase Failed to create certificate Failed to write certificate: Failed to write private key: Failed to save certificate file Failed to save private key file genms Base filename (-1, -2, etc suffixes will be appended as needed) Give threshold and participants at once as M/N How many participants will share parts of the multisig wallet How many signers are required to sign a valid transaction Create testnet multisig wallets Create stagenet multisig wallets Create an address file for new wallets Generating %u %u/%u multisig wallets Failed to verify multisig info Error verifying multisig extra info Generated multisig wallets for address Error creating multisig wallets: This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other Error: Can't specify more than one of --testnet and --stagenet Error: expected N/M, but got: Error: either --scheme or both of --threshold and --participants may be given Error: expected N > 1 and N <= M, but got N==%u and M==%d Error: --filename-base is required mms::message_store Use PyBitmessage instance at URL <arg> Specify <arg> as username:password for PyBitmessage API Auto-config cannot proceed because auto config data from other signers is not complete The signer config is not complete. Wallet can't go multisig because key sets from other signers are missing or not complete. Wallet can't start another key exchange round because key sets from other signers are missing or not complete. Syncing not done because multisig sync data from other signers are missing or not complete. There are waiting messages, but nothing is ready to process under normal circumstances Use "mms next sync" if you want to force processing of the waiting sync data Use "mms note" to display the waiting notes There are no messages waiting to be processed. key set additional key set multisig sync data partially signed tx fully signed tx note signer config auto-config data unknown message type in out unknown message direction ready to send sent waiting processed cancelled unknown message state sw Generate new wallet and save it to <arg> Generate new wallet from device and save it to <arg> Generate incoming-only wallet from view key Generate deterministic wallet from spend key Generate wallet from private keys Generate a master wallet from multisig wallet keys Language for mnemonic Specify Electrum seed for wallet recovery/creation Recover wallet using Electrum-style mnemonic seed alias for --restore-deterministic-wallet Recover multisig wallet using Electrum-style mnemonic seed Generate non-deterministic view and spend keys Restore from estimated blockchain height on specified date failed to read wallet password Enter a new password for the wallet Wallet password invalid argument: must be either 0/1, true/false, y/n, yes/no DNSSEC validation passed WARNING: DNSSEC validation was unsuccessful, this address may not be correct! For URL: Monero Address = you have cancelled the transfer request failed to parse index: invalid format for subaddress lookahead; must be <major>:<minor> no connection to daemon. Please make sure daemon is running. RPC error: Error en el RPC: failed to get random outputs to mix: Not enough money in unlocked balance Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees not enough outputs for specified ring size no hay salidas suficientes para el tamaño de círculo especificado output amount cantidad de la salida found outputs to use se encontraron salidas para utilizar Please use sweep_unmixable. transaction was not constructed la transacción no se construyó Reason: one of destinations is zero uno de los destinos es cero failed to find a suitable way to split transactions fallo al encontrar una manera adecuada de dividir las transacciones unknown transfer error: error desconocido al transferir: Multisig error: internal error: error interno: unexpected error: error inesperado: There was an error, which could mean the node may be trying to get you to retry creating a transaction, and zero in on which outputs you own. Or it could be a bona fide error. It may be prudent to disconnect from this node, and not try to send a transaction immediately. Alternatively, connect to another node so the original node cannot correlate information. File %s likely stores wallet private keys! Use a different file name. seconds minutes hours days months a long time This is the command line monero wallet. It needs to connect to a monero daemon to work correctly. WARNING: Do not reuse your Monero keys on another fork, UNLESS this fork has key reuse mitigations built in. Doing so will harm your privacy. Unknown command: Allow communicating with a daemon that uses a different RPC version Restore from specific blockchain height The newly created transaction will not be relayed to the monero network Create an address file for new wallets Display English language names daemon is busy. Please try again later. possibly lost connection to daemon Error: Is this OK? transaction %s was rejected by daemon File %s already exists. Are you sure to overwrite it? Failed to initialize wallet tools::wallet2 Use daemon instance at <host>:<port> Use daemon instance at host <arg> instead of localhost Wallet password file Use daemon instance at port <arg> instead of 18081 For testnet. Daemon must also be launched with --testnet flag can't specify daemon host or port more than once can't specify more than one of --password and --password-file the password file specified could not be read Failed to load file Wallet password (escape/quote as needed) [<ip>:]<port> socks proxy to use for daemon connections Enable commands which rely on a trusted daemon Disable commands which rely on a trusted daemon Specify username[:password] for daemon RPC client Enable SSL on daemon RPC connections: enabled|disabled|autodetect List of valid fingerprints of allowed RPC servers Allow any SSL certificate from the daemon Allow user (via --daemon-ssl-ca-certificates) chain certificates For stagenet. Daemon must also be launched with --stagenet flag Set shared ring database path Number of rounds for the key derivation function HW device to use HW device wallet derivation path (e.g., SLIP-10) Do not use DNS Do not connect to a daemon, nor use DNS File containing extra entropy to initialize the PRNG (any data, aim for 256 bits of entropy to be useful, wihch typically means more than 256 bits of data) Invalid argument for Enabling -- requires -- or -- or use of a .onion/.i2p domain --trusted-daemon and --untrusted-daemon are both seen, assuming untrusted Daemon is local, assuming trusted no password specified; use --prompt-for-password to prompt for a password Enter a new password for the wallet Wallet password Failed to parse JSON Version %u too new, we can only grok up to %u failed to parse view key secret key failed to verify view key secret key failed to parse spend key secret key failed to verify spend key secret key Electrum-style word list failed verification La lista de palabras del estilo Electrum fallo en la verificación At least one of either an Electrum-style word list, private view key, or private spend key must be specified Both Electrum-style word list and private key(s) specified invalid address view key does not match standard address spend key does not match standard address Cannot generate deprecated wallets from JSON failed to parse address: Address must be specified in order to create watch-only wallet failed to generate new wallet: fallo al generar nuevo monedero: Password is needed to compute key image for incoming monero Invalid password: password is needed to compute key image for incoming monero Primary account No funds received in this tx. failed to read file Set subaddress lookahead sizes to <major>:<minor> Path to a PEM format private key Path to a PEM format certificate Path to file containing concatenated PEM format certificate(s) to replace system CA(s). tools::wallet_rpc_server Failed to create directory Failed to create directory %s: %s Cannot specify -- and -- Failed to create file . Check permissions or remove file Error writing to file RPC username/password is stored in file Tag %s is unregistered. Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) This is the RPC monero wallet. It needs to connect to a monero daemon to work correctly. Can't specify more than one of --testnet and --stagenet Can't specify more than one of --wallet-file and --generate-from-json Must specify --wallet-file or --generate-from-json or --wallet-dir Loading wallet... Saving wallet... Successfully saved Successfully loaded Wallet initialization failed: Failed to initialize wallet RPC server Starting wallet RPC server Failed to run wallet: Stopped wallet RPC server Failed to save wallet: wallet_args Wallet options Generate wallet from JSON format file Use wallet <arg> Set RPC client secret key for RPC payments Max number of threads to use for a parallel job Specify log file Config file General options This is the command line monero wallet. It needs to connect to a monero daemon to work correctly. Can't find config file Logging to: Logging to %s WARNING: You may not have a high enough lockable memory limit see ulimit -l Usage: