Commit Graph

60 Commits

Author SHA1 Message Date
moneromooo-monero
5eaedb51b9
unit_tests: fix use after free in serialization test 2021-09-08 01:03:34 +00:00
Lee Clagett
08e4497c6e Improve cryptonote (block and tx) binary read performance 2021-01-23 06:23:39 +00:00
moneromooo-monero
82ee01699c
Integrate CLSAGs into monero
They are allowed from v12, and MLSAGs are rejected from v13.
2020-08-27 12:44:04 +00:00
Alexander Blair
bad5d8d6f0
Merge pull request #6690
7175dcb10 replace most boost serialization with existing monero serialization (moneromooo-monero)
2020-08-27 02:54:30 -07:00
luigi1111
765db1ae7a
Revert "Use domain-separated ChaCha20 for in-memory key encryption"
This reverts commit 921dd8dde5.
2020-08-17 14:08:59 -05:00
moneromooo-monero
7175dcb107
replace most boost serialization with existing monero serialization
This reduces the attack surface for data that can come from
malicious sources (exported output and key images, multisig
transactions...) since the monero serialization is already
exposed to the outside, and the boost lib we were using had
a few known crashers.

For interoperability, a new load-deprecated-formats wallet
setting is added (off by default). This allows loading boost
format data if there is no alternative. It will likely go
at some point, along with the ability to load those.

Notably, the peer lists file still uses the boost serialization
code, as the data it stores is define in epee, while the new
serialization code is in monero, and migrating it was fairly
hairy. Since this file is local and not obtained from anyone
else, the marginal risk is minimal, but it could be migrated
later if needed.

Some tests and tools also do, this will stay as is for now.
2020-08-17 16:23:58 +00:00
Sarang Noether
921dd8dde5 Use domain-separated ChaCha20 for in-memory key encryption 2020-08-09 19:11:54 -04:00
SomaticFanatic
5ef0607da6 Update copyright year to 2020
Update copyright year to 2020
2020-05-06 22:36:54 -04:00
moneromooo-monero
dd8c6b1703
wallet: do not split integrated addresses in address book api 2020-01-26 00:03:53 +00:00
moneromooo-monero
93bb2f48f7
ringct: prevent use of full ringct signatures for more than one input 2019-04-11 19:44:06 +00:00
moneromooo-monero
91f4c7f45f
Make difficulty 128 bit instead of 64 bit
Based on Boolberry work by:
  jahrsg <jahr@jahr.me>
  cr.zoidberg <crypto.zoidberg@gmail.com>
2019-03-24 21:03:19 +00:00
binaryFate
1f2930ce0b Update 2019 copyright 2019-03-05 22:05:34 +01:00
moneromooo-monero
b6534c40e6
ringct: remove unused senderPk from ecdhTuple
This was an early ringct field, which was never used in production
2019-01-22 23:17:42 +00:00
moneromooo-monero
f931e16c6e
add a bulletproof version, new bulletproof type, and rct config
This makes it easier to modify the bulletproof format
2019-01-22 23:17:24 +00:00
moneromooo-monero
5f614ba968
simplewallet: print the number of show/all transfers 2018-11-04 22:27:05 +00:00
moneromooo-monero
8d71b2b1b3
wallet2: only export necessary outputs and key images
and disable annoying test that requires ridiculous amounts
of skullduggery every time some format changes
2018-11-04 22:27:01 +00:00
luigi1111
ad5aabc85a
Merge pull request #4264
0c8d8f6 unit_tests: remove std::move in return statement (moneromooo-monero)
2018-09-04 13:14:08 -05:00
stoffu
a64f57fe42
wallet2: make --restricted-rpc available for wallet RPC only 2018-08-16 09:54:23 +09:00
moneromooo-monero
0c8d8f6b2e
unit_tests: remove std::move in return statement
This actually prevents copy elision
2018-08-15 13:38:47 +00:00
stoffu
bcab579864
wallet: allow adjusting number of rounds for the key derivation function 2018-08-08 01:56:54 +09:00
stoffu
af773211cb
Stagenet 2018-03-05 11:55:05 +09:00
cslashm
e745c1e38d Code modifications to integrate Ledger HW device into monero-wallet-cli.
The basic approach it to delegate all sensitive data (master key, secret
ephemeral key, key derivation, ....) and related operations to the device.
As device has low memory, it does not keep itself the values
(except for view/spend keys) but once computed there are encrypted (with AES
are equivalent) and return back to monero-wallet-cli. When they need to be
manipulated by the device, they are decrypted on receive.

Moreover, using the client for storing the value in encrypted form limits
the modification in the client code. Those values are transfered from one
C-structure to another one as previously.

The code modification has been done with the wishes to be open to any
other hardware wallet. To achieve that a C++ class hw::Device has been
introduced. Two initial implementations are provided: the "default", which
remaps all calls to initial Monero code, and  the "Ledger", which delegates
all calls to Ledger device.
2018-03-04 12:54:53 +01:00
stoffu
54c256bc26
unit_tests.serialization: refactored with ASSERT_EQ_MAP 2018-02-12 21:56:51 +09:00
xmr-eric
18216f19dd Update 2018 copyright 2018-01-26 10:03:20 -05:00
Riccardo Spagni
f9c66ba67c
Merge pull request #2990
2d17feb0 factor STL container serialization (moneromooo-monero)
2018-01-10 11:53:05 +01:00
moneromooo-monero
1e5491e942
Add a chacha20 variant to go with chacha8 2017-12-25 19:28:03 +00:00
moneromooo-monero
2d17feb060
factor STL container serialization 2017-12-22 19:47:12 +00:00
moneromooo-monero
4c313324b1
Add N/N multisig tx generation and signing
Scheme by luigi1111:

    Multisig for RingCT on Monero

    2 of 2

    User A (coordinator):
    Spendkey b,B
    Viewkey a,A (shared)

    User B:
    Spendkey c,C
    Viewkey a,A (shared)

    Public Address: C+B, A

    Both have their own watch only wallet via C+B, a

    A will coordinate spending process (though B could easily as well, coordinator is more needed for more participants)

    A and B watch for incoming outputs

    B creates "half" key images for discovered output D:
    I2_D = (Hs(aR)+c) * Hp(D)

    B also creates 1.5 random keypairs (one scalar and 2 pubkeys; one on base G and one on base Hp(D)) for each output, storing the scalar(k) (linked to D),
    and sending the pubkeys with I2_D.

    A also creates "half" key images:
    I1_D = (Hs(aR)+b) * Hp(D)

    Then I_D = I1_D + I2_D

    Having I_D allows A to check spent status of course, but more importantly allows A to actually build a transaction prefix (and thus transaction).

    A builds the transaction until most of the way through MLSAG_Gen, adding the 2 pubkeys (per input) provided with I2_D
    to his own generated ones where they are needed (secret row L, R).

    At this point, A has a mostly completed transaction (but with an invalid/incomplete signature). A sends over the tx and includes r,
    which allows B (with the recipient's address) to verify the destination and amount (by reconstructing the stealth address and decoding ecdhInfo).

    B then finishes the signature by computing ss[secret_index][0] = ss[secret_index][0] + k - cc[secret_index]*c (secret indices need to be passed as well).

    B can then broadcast the tx, or send it back to A for broadcasting. Once B has completed the signing (and verified the tx to be valid), he can add the full I_D
    to his cache, allowing him to verify spent status as well.

    NOTE:
    A and B *must* present key A and B to each other with a valid signature proving they know a and b respectively.
    Otherwise, trickery like the following becomes possible:
    A creates viewkey a,A, spendkey b,B, and sends a,A,B to B.
    B creates a fake key C = zG - B. B sends C back to A.
    The combined spendkey C+B then equals zG, allowing B to spend funds at any time!
    The signature fixes this, because B does not know a c corresponding to C (and thus can't produce a signature).

    2 of 3

    User A (coordinator)
    Shared viewkey a,A
    "spendkey" j,J

    User B
    "spendkey" k,K

    User C
    "spendkey" m,M

    A collects K and M from B and C
    B collects J and M from A and C
    C collects J and K from A and B

    A computes N = nG, n = Hs(jK)
    A computes O = oG, o = Hs(jM)

    B anc C compute P = pG, p = Hs(kM) || Hs(mK)
    B and C can also compute N and O respectively if they wish to be able to coordinate

    Address: N+O+P, A

    The rest follows as above. The coordinator possesses 2 of 3 needed keys; he can get the other
    needed part of the signature/key images from either of the other two.

    Alternatively, if secure communication exists between parties:
    A gives j to B
    B gives k to C
    C gives m to A

    Address: J+K+M, A

    3 of 3

    Identical to 2 of 2, except the coordinator must collect the key images from both of the others.
    The transaction must also be passed an additional hop: A -> B -> C (or A -> C -> B), who can then broadcast it
    or send it back to A.

    N-1 of N

    Generally the same as 2 of 3, except participants need to be arranged in a ring to pass their keys around
    (using either the secure or insecure method).
    For example (ignoring viewkey so letters line up):
    [4 of 5]
    User: spendkey
    A: a
    B: b
    C: c
    D: d
    E: e

    a -> B, b -> C, c -> D, d -> E, e -> A

    Order of signing does not matter, it just must reach n-1 users. A "remaining keys" list must be passed around with
    the transaction so the signers know if they should use 1 or both keys.
    Collecting key image parts becomes a little messy, but basically every wallet sends over both of their parts with a tag for each.
    Thia way the coordinating wallet can keep track of which images have been added and which wallet they come from. Reasoning:
    1. The key images must be added only once (coordinator will get key images for key a from both A and B, he must add only one to get the proper key actual key image)
    2. The coordinator must keep track of which helper pubkeys came from which wallet (discussed in 2 of 2 section). The coordinator
    must choose only one set to use, then include his choice in the "remaining keys" list so the other wallets know which of their keys to use.

    You can generalize it further to N-2 of N or even M of N, but I'm not sure there's legitimate demand to justify the complexity. It might
    also be straightforward enough to support with minimal changes from N-1 format.
    You basically just give each user additional keys for each additional "-1" you desire. N-2 would be 3 keys per user, N-3 4 keys, etc.

The process is somewhat cumbersome:

To create a N/N multisig wallet:

 - each participant creates a normal wallet
 - each participant runs "prepare_multisig", and sends the resulting string to every other participant
 - each participant runs "make_multisig N A B C D...", with N being the threshold and A B C D... being the strings received from other participants (the threshold must currently equal N)

As txes are received, participants' wallets will need to synchronize so that those new outputs may be spent:

 - each participant runs "export_multisig FILENAME", and sends the FILENAME file to every other participant
 - each participant runs "import_multisig A B C D...", with A B C D... being the filenames received from other participants

Then, a transaction may be initiated:

 - one of the participants runs "transfer ADDRESS AMOUNT"
 - this partly signed transaction will be written to the "multisig_monero_tx" file
 - the initiator sends this file to another participant
 - that other participant runs "sign_multisig multisig_monero_tx"
 - the resulting transaction is written to the "multisig_monero_tx" file again
 - if the threshold was not reached, the file must be sent to another participant, until enough have signed
 - the last participant to sign runs "submit_multisig multisig_monero_tx" to relay the transaction to the Monero network
2017-12-17 16:11:57 +00:00
moneromooo-monero
383ff4f689
remove "using namespace std" from headers
It's nasty, and actually breaks on Solaris, where if.h fails to
build due to:

  struct map *if_memmap;
2017-11-14 16:56:10 +00:00
Riccardo Spagni
b4126266d4
Merge pull request #2610
44c1d160 unit_tests: fix compiling on Windows (iDunk5400)
2017-10-15 18:54:32 +02:00
iDunk5400
44c1d160c8
unit_tests: fix compiling on Windows 2017-10-08 23:59:08 +02:00
kenshi84
53ad5a0f42
Subaddresses 2017-10-07 13:06:21 +09:00
redfish
540d6fa3d5 tests: pass data dir as arg
This fixes test failure on builds that happen
to be built in 'build/' instead of 'build/release'.

Use boost filesystem path type.
2017-09-28 01:41:44 -04:00
Lee Clagett
4a8f96f95d Improvements for epee binary to hex functions:
- Performance improvements
  - Added `span` for zero-copy pointer+length arguments
  - Added `std::ostream` overload for direct writing to output buffers
  - Removal of unused `string_tools::buff_to_hex`
2017-04-11 16:35:00 -04:00
moneromooo-monero
f065234b71
core: cache tx and block hashes in the respective classes
An idea from smooth
2017-03-23 09:25:17 +00:00
Riccardo Spagni
c3599fa7b9
update copyright year, fix occasional lack of newline at line end 2017-02-21 19:38:18 +02:00
kenshi84
8027ce0c75 extract some basic code from libcryptonote_core into libcryptonote_basic 2017-02-08 22:45:15 +09:00
moneromooo-monero
b3ca0c627a
unit_tests: fix portable serialization tests hardcoded data path 2017-01-14 21:19:33 +00:00
kenshi84
ada7c7da8f portable serializer: tests added 2017-01-03 09:14:48 +09:00
Lee Clagett
d55e2266ca Fixed uninitialized valgrind errors in serialization tests 2016-12-20 12:51:27 -05:00
Shen Noether
76958fc75a
ringct: switch to Borromean signatures 2016-12-04 21:54:11 +00:00
moneromooo-monero
73e8a76d86
tests: fix uninitialized data valgrind reports in serialization tests 2016-11-20 17:25:21 +00:00
moneromooo-monero
ffd8c41f36
ringct: check the size of amount_keys is the same as destinations 2016-10-29 13:33:48 +01:00
moneromooo-monero
7d413f635f
rct: rework serialization to avoid storing vector sizes 2016-09-14 20:23:06 +01:00
moneromooo-monero
93f5c625f0
rct: rework v2 txes into prunable and non prunable data
Nothing is pruned, but this allows easier changes later.
2016-08-28 21:30:18 +01:00
moneromooo-monero
3ab2ab3e76
rct: change the simple flag to a type
for future expansion
2016-08-28 21:30:14 +01:00
Shen Noether
c5be4b0bea
rct: avoid the need for the last II element
This element is used in the generation of the MLSAG, but isn't
needed in verification.
Also misc changes in the cryptonote code to match, by mooo.
2016-08-28 21:30:12 +01:00
moneromooo-monero
b337aea6cc
rct: do not serialize senderPk - it is not used anymore 2016-08-28 21:30:01 +01:00
moneromooo-monero
9b70856ccb
rct: make the amount key derivable by a third party with the tx key
Scheme design from luigi1114.
2016-08-28 21:29:46 +01:00
moneromooo-monero
cf33e1a52a
rct: do not serialize public keys in outPk
They can be reconstructed from vout
2016-08-28 21:29:43 +01:00