- New flag in NOTIFY_NEW_TRANSACTION to indicate stem mode
- Stem loops detected in tx_pool.cpp
- Embargo timeout for a blackhole attack during stem phase
A newly synced Alice sends a (typically quite small) list of
txids in the local tpxool to a random peer Bob, who then uses
the existing tx relay system to send Alice any tx in his txpool
which is not in the list Alice sent
If the peer (whether pruned or not itself) supports sending pruned blocks
to syncing nodes, the pruned version will be sent along with the hash
of the pruned data and the block weight. The original tx hashes can be
reconstructed from the pruned txes and theur prunable data hash. Those
hashes and the block weights are hashes and checked against the set of
precompiled hashes, ensuring the data we received is the original data.
It is currently not possible to use this system when not using the set
of precompiled hashes, since block weights can not otherwise be checked
for validity.
This is off by default for now, and is enabled by --sync-pruned-blocks
Essentially, one can send such a large amount of IDs that core exhausts
all free memory. This issue can theoretically be exploited using very
large CN blockchains, such as Monero.
This is a partial fix. Thanks and credit given to CryptoNote author
'cryptozoidberg' for collaboration and the fix. Also thanks to
'moneromooo'. Referencing HackerOne report #506595.
When all our outgoing peer slots are filled, we cycle one peer at
a time looking for syncing peers until we have at least two such
peers. This brings two advantages:
- Peers without incoming connections will find more syncing peers
that before, thereby strengthening network decentralization
- Peers will have more resistance to isolation attacks, as they
are more likely to find a "good" peer than they were before
- Support for ".onion" in --add-exclusive-node and --add-peer
- Add --anonymizing-proxy for outbound Tor connections
- Add --anonymous-inbounds for inbound Tor connections
- Support for sharing ".onion" addresses over Tor connections
- Support for broadcasting transactions received over RPC exclusively
over Tor (else broadcast over public IP when Tor not enabled).
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
Fix sync wedge corner case:
It could happen if a connection went into standby mode, while
it was the one which had requested the next span, and that span
was still waiting for the data, and that peer is not on the
main chain. Other peers can then start asking for that data
again and again, but never get it as only that forked peer does.
And various other fixes
When a node is dropped, we stop considering its claimed blockchain
height as a factor in the target height calculation. This prevents
a runaway chain from being still thought to be the target even if
the nodes carrying it are dropped.
A block queue is now placed between block download and
block processing. Blocks are now requested only from one
peer (unless starved).
Includes a new sync_info coommand.
In particular, the prepare_handle_incoming_blocks call
is pretty lengthy, and entirely pointless in the common
case where several different connections will prepare
the exact same blocks.
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
Added a new command to the P2P protocol definitions to allow querying for support flags.
Implemented handling of new support flags command in net_node. Changed for_each callback template to include support flags. Updated print_connections command to show peer support flags.
Added p2p constant for signaling fluffy block support.
Added get_pool_transaction function to cryptnote_core.
Added new commands to cryptonote protocol for relaying fluffy blocks.
Implemented handling of fluffy block command in cryptonote protocol.
Enabled fluffy block support in node initial configuration.
Implemented get_testnet function in cryptonote_core.
Made it so that fluffy blocks only run on testnet.
new update of the pr with network limits
more debug options:
discarding downloaded blocks all or after given height.
trying to trigger the locking errors.
debug levels polished/tuned to sane values.
debug/logging improved.
warning: this pr should be correct code, but it could make
an existing (in master version) locking error appear more often.
it's a race on the list (map) of peers, e.g. between closing/deleting
them versus working on them in net-limit sleep in sending chunk.
the bug is not in this code/this pr, but in the master version.
the locking problem of master will be fixed in other pr.
problem is ub, and in practice is seems to usually cause program abort
(tested on debian stable with updated gcc). see --help for option
to add sleep to trigger the error faster.
Update of the PR with network limits
works very well for all speeds
(but remember that low download speed can stop upload
because we then slow down downloading of blockchain
requests too)
more debug options
fixed pedantic warnings in our code
should work again on Mac OS X and FreeBSD
fixed warning about size_t
tested on Debian, Ubuntu, Windows(testing now)
TCP options and ToS (QoS) flag
FIXED peer number limit
FIXED some spikes in ingress/download
FIXED problems when other up and down limit
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
