Commit Graph

1019 Commits

Author SHA1 Message Date
luigi1111
bae49e9fbd
Merge pull request #6022
dd28383 depends: bump cppzmq version to 4.4.1 (anonimal)
157b3fc depends: bump zeromq version to 4.1.7 (anonimal)
2019-10-25 13:54:15 -05:00
luigi1111
960c215801
Merge pull request #5357
b3a9a4d add a quick early out to get_blocks.bin when up to date (moneromooo-monero)
2899379 daemon, wallet: new pay for RPC use system (moneromooo-monero)
ffa4602 simplewallet: add public_nodes command (moneromooo-monero)
2019-10-25 13:38:21 -05:00
moneromooo-monero
2899379791
daemon, wallet: new pay for RPC use system
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.

This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo

This has some advantages:
 - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
 - incentive to run your own node instead of using a third party's, thereby promoting decentralization
 - decentralized: payment is done between a client and server, with no third party needed
 - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
 - no payment occurs on the blockchain, so there is no extra transactional load
 - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
 - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
 - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
 - no large credit balance maintained on servers, so they have no incentive to exit scam
 - you can use any/many node(s), since there's little cost in switching servers
 - market based prices: competition between servers to lower costs
 - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
 - increases network security
 - helps counteract mining pools' share of the network hash rate
 - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner

And some disadvantages:
 - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
 - payment is "random", so a server might go a long time without a block before getting one
 - a public node's overall expected payment may be small

Public nodes are expected to compete to find a suitable level for
cost of service.

The daemon can be set up this way to require payment for RPC services:

  monerod --rpc-payment-address 4xxxxxx \
    --rpc-payment-credits 250 --rpc-payment-difficulty 1000

These values are an example only.

The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.

The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).

There are three new settings in the wallet:

 - credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.

 - auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25

 - persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.

To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.

The wallet has a few new commands too:

 - start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
 - stop_mining_for_rpc: stop mining to acquire more credits
 - rpc_payments: display information about current credits with
the currently selected daemon

The node has an extra command:

 - rpc_payments: display information about clients and their
balances

The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
2019-10-25 09:34:38 +00:00
anonimal
157b3fcff4
depends: bump zeromq version to 4.1.7
Resolves https://hackerone.com/reports/652911
2019-10-25 01:22:17 +00:00
anonimal
dd28383a4b
depends: bump cppzmq version to 4.4.1 2019-10-25 00:47:33 +00:00
luigi1111
42d84ad35e
Merge pull request #6006
9f3be3b epee: use SO_REUSEADDR on non-Windows targets (xiphon)
2019-10-24 12:41:59 -05:00
xiphon
9f3be3baed epee: use SO_REUSEADDR on non-Windows targets 2019-10-22 18:40:01 +00:00
luigi1111
6b58d6248a
Merge pull request #5996
23ba69e epee: fix SSL server handshake, run_one() can block, use poll_one() (xiphon)
2019-10-22 10:26:31 -05:00
luigi1111
18f62f89d8
Merge pull request #5986
1080136 abstract_tcp_server2: move 'Trying to connect' from error to debug (moneromooo-monero)
2019-10-22 10:23:04 -05:00
luigi1111
84ce43a239
Merge pull request #5966
be82c40 Support median block size > 4 GB (moneromooo-monero)
2019-10-22 10:08:32 -05:00
moneromooo-monero
be82c40703
Support median block size > 4 GB
add a 128/64 division routine so we can use a > 32 bit median block
size in calculations
2019-10-21 10:41:07 +00:00
xiphon
23ba69ec88 epee: fix SSL server handshake, run_one() can block, use poll_one() 2019-10-18 18:32:33 +00:00
luigi1111
7ec8d9640e
Merge pull request #5911
e48dcb7 levin: armour against some 'should not happen' case (moneromooo-monero)
2019-10-16 13:35:55 -05:00
moneromooo-monero
e48dcb7a01
levin: armour against some "should not happen" case
If adding a response handler after the protocol is released,
they could never be cancelled again, and would end up keeping
a ref that never goes away
2019-10-15 10:30:08 +00:00
luigi1111
8fcdf77d7b
Merge pull request #5947
c9cfbf7 epee: tcp server - set SO_LINGER instead of SO_REUSEADDR option (xiphon)
2019-10-14 20:04:02 -05:00
luigi1111
4118e4b1e9
Merge pull request #5937
4b654f6 abstract_tcp_server2: log pointer, not contents, where appropriate (moneromooo-monero)
2019-10-14 18:08:47 -05:00
moneromooo-monero
10801362f4
abstract_tcp_server2: move "Trying to connect" from error to debug
and fix the message grammar
2019-10-14 14:15:21 +00:00
luigi1111
da7a3dd17b
Merge pull request #5936
24473d7 build: fix MinGW GUI dependencies build (xiphon)
2019-10-08 14:46:09 -05:00
luigi1111
18da0fa240
Merge pull request #5918
4371791 epee: implement handshake timeout for SSL connections (xiphon)
2019-10-08 14:30:45 -05:00
luigi1111
ca975bcb79
Merge pull request #5917
7d81850 epee: fix network timeouts in blocked_mode_client (xiphon)
2019-10-08 14:28:50 -05:00
xiphon
c9cfbf7fb3 epee: tcp server - set SO_LINGER instead of SO_REUSEADDR option 2019-10-02 19:08:02 +00:00
luigi1111
15b9b4e047
Merge pull request #5910
1b91beb abstract_tcp_server2: fix lingering connections (moneromooo-monero)
2019-09-30 18:55:58 -05:00
luigi1111
c6430f9dd0
Merge pull request #5893
Coverity fixes [3a81639, 1bd962d, 2825f07, d099658, d46f701, cd57a10] (anonimal)
2019-09-30 18:43:48 -05:00
luigi1111
33ce4ae1fb
Merge pull request #5653
5f8524e Streamline build setup (hyc)
2019-09-30 18:38:34 -05:00
moneromooo-monero
4b654f65a3
abstract_tcp_server2: log pointer, not contents, where appropriate 2019-09-27 15:15:32 +00:00
xiphon
24473d7584 build: fix MinGW GUI dependencies build 2019-09-26 01:43:00 +00:00
Howard Chu
fcfa6665a9
Don't set ARCH_ID if it's already set
Usually it's unset, but depends toolchain files set it explicitly
for cross-compiling. Don't override preset values. But make sure
it's set for all x86 / x86_64 builds, not just Linux.

Also make sure -std=c++11 is set for Darwin builds, not all
submodules were getting it consistently before.
2019-09-25 20:10:57 +01:00
Howard Chu
5f8524ef5f
Streamline build setup
Use shorter, prefix-unique directory names
  gitian-builder  -> builder
  gitian-sigs     -> sigs
  monero-binaries -> out

Just use builder/inputs/monero, no need for 2nd repo clone
2019-09-24 17:17:04 +01:00
moneromooo-monero
89339551a2
epee: misc_log_ex.h can now be used in C code
use mfatal/merror/mwarning/minfo/mdebug/mtrace
2019-09-24 15:47:31 +00:00
luigi1111
cbec75ec31
Merge pull request #5892
ab2819a depends: attempt to fix readline (iDunk5400)
2019-09-24 10:34:59 -05:00
luigi1111
77b8e8a536
Merge pull request #5891
e09dbc6 depends: fix monero binaries Boost linking errors (iDunk5400)
2019-09-24 10:30:57 -05:00
luigi1111
eadef8d9cd
Merge pull request #5875
0c55837 contrib: add a suppressions file for leak sanitizer (moneromooo-monero)
2019-09-24 10:06:32 -05:00
xiphon
4371791977 epee: implement handshake timeout for SSL connections 2019-09-17 22:21:16 +00:00
xiphon
7d81850a46 epee: fix network timeouts in blocked_mode_client 2019-09-16 18:55:36 +00:00
moneromooo-monero
32f725d32f
Properly format multiline logs
As a side effect, colouring on Windows should now work
regardless of version
2019-09-16 16:58:01 +00:00
luigi1111
b4ac8969a8
Merge pull request #5898
73f22c4 depends: fix MacOS build with Clang 3.7.1 (vtnerd)
2019-09-14 13:22:35 -05:00
moneromooo-monero
1b91bebd2e
abstract_tcp_server2: fix lingering connections
Resetting the timer after shutdown was initiated would keep
a reference to the object inside ASIO, which would keep the
connection alive until the timer timed out
2019-09-12 12:10:50 +00:00
iDunk5400
e09dbc6089
depends: fix monero binaries Boost linking errors
It would try to link against host system Boost libs when building outside gitian. Tested with x86_64-linux-gnu target.
2019-09-09 10:00:47 +02:00
luigi1111
e7b5b231e0
Merge pull request #5858
5f4bd92 Fix Travis build on Windows + Mac (hyperreality)
2019-09-08 20:09:11 -05:00
Lee Clagett
73f22c48e1
depends: fix MacOS build with Clang 3.7.1 2019-09-08 22:49:11 +02:00
anonimal
cd57a10c90
epee: abstract_tcp_server2: resolve CID 203919 (DC.WEAK_CRYPTO)
The problem actually exists in two parts:

1. When sending chunks over a connection, if the queue size is
greater than N, the seed is predictable across every monero node.

>"If rand() is used before any calls to srand(), rand() behaves as if
it was seeded with srand(1). Each time rand() is seeded with the same seed, it
must produce the same sequence of values."

2. The CID speaks for itself: "'rand' should not be used for security-related
applications, because linear congruential algorithms are too easy to break."

*But* this is an area of contention.

One could argue that a CSPRNG is warranted in order to fully mitigate any
potential timing attacks based on crafting chunk responses. Others could argue
that the existing LCG, or even an MTG, would suffice (if properly seeded). As a
compromise, I've used an MTG with a full bit space. This should give a healthy
balance of security and speed without relying on the existing crypto library
(which I'm told might break on some systems since epee is not (shouldn't be)
dependent upon the existing crypto library).
2019-09-08 01:14:39 +00:00
iDunk5400
ab2819a365
depends: attempt to fix readline
Make readline actually compile, and make ncurses use existing terminfo data (if available).
2019-09-07 22:02:11 +02:00
anonimal
2825f07d95
epee: connection_basic: resolve CID 203916 (UNINIT_CTOR) 2019-09-06 23:18:00 +00:00
anonimal
3a816398b3
epee: connection_basic: resolve CID 203920 (UNINIT_CTOR) 2019-09-06 22:48:16 +00:00
moneromooo-monero
bc1144e98e
Fix IP address serialization on big endian
IP addresses are stored in network byte order even on little
endian hosts
2019-09-04 14:54:01 +00:00
moneromooo-monero
516f7b9de0
storages: fix "portable" storage on big endian 2019-09-04 14:53:57 +00:00
moneromooo-monero
32c3834948
storages: fix writing varints on big endian 2019-09-04 14:53:57 +00:00
moneromooo-monero
bdda084651
epee: fix local/loopback checks on big endian
IPv4 addresses are kept in network byte order in memory
2019-09-04 14:53:56 +00:00
luigi1111
1b93cb74bb
Merge pull request #5824
2a41dc0 epee: fix connections not being properly closed in some instances (moneromooo-monero)
2019-09-04 09:40:21 -05:00
luigi1111
6fe281d315
Merge pull request #5814
bdcdb0e Remove unused code under WINDWOS_PLATFORM guard (tomsmeding)
a84aa04 syncobj.h no longer defines shared_guard, so remove those define's (tomsmeding)
2019-09-04 09:30:29 -05:00
luigi1111
2acd3cee8c
Merge pull request #5796
e3cff3d Gitian build script fixes for MacOS (jonathancross)
2019-09-04 09:23:15 -05:00
luigi1111
101c9678a5
Merge pull request #5764
f26e663 Gitian build (mac, linux): gzip => bzip2 (jonathancross)
2019-09-04 09:21:27 -05:00
luigi1111
23547e6ed6
Merge pull request #5536
1a367d6 simplewallet: lock console on inactivity (moneromooo-monero)
2019-09-04 09:18:38 -05:00
moneromooo-monero
0c558378ed
contrib: add a suppressions file for leak sanitizer
with the Cryptonight per-thread buffer
2019-08-29 11:11:59 +00:00
moneromooo-monero
1a367d6a22
simplewallet: lock console on inactivity 2019-08-28 19:01:48 +00:00
hyperreality
5f4bd92e06 Fix Travis build on Windows + Mac
Following 13c0b8c, the unwind package is being attempted to be built on
Windows and Mac when it should only be built on Linux.
2019-08-27 00:41:03 +01:00
Tom Smeding
a84aa04d57 syncobj.h no longer defines shared_guard, so remove those define's
The removed preprocessor macro's refer to types that are not defined in
the file anymore; the only other place where shared_guard is defined is
in winobj.h, which also defines the same macro's. Therefore, this change
is safe.

(Side note is that these macro's weren't used at all anyway, but that is
orthogonal to the issue.)
2019-08-23 08:42:36 +02:00
luigi1111
cdfa2e58df
Merge pull request #5827
30779de fix feature not introduced until boost 1.66 (jtgrassie)
2019-08-21 15:54:10 -05:00
luigi1111
1b373185aa
Merge pull request #5702
13c0b8c Add depends riscv 64 bit support (TheCharlatan)
2019-08-21 14:49:09 -05:00
TheCharlatan
13c0b8c265 Add depends riscv 64 bit support 2019-08-20 15:24:47 +02:00
Jethro Grassie
30779de39d
fix feature not introduced until boost 1.66 2019-08-20 01:06:59 -04:00
luigi1111
b7415d3a5c
Merge pull request #5706
9a5933f Gitian: Add version string to output tar archives (TheCharlatan)
2019-08-19 17:16:02 -05:00
luigi1111
bc4f1145c3
Merge pull request #5705
59eecc7 Update icu4c to latest support version (TheCharlatan)
2019-08-19 17:14:52 -05:00
moneromooo-monero
2a41dc0453
epee: fix connections not being properly closed in some instances
Fixed by Fixed by crCr62U0
2019-08-19 22:09:55 +00:00
moneromooo-monero
eeca5ca0c8
epee: support unicode in parsed strings 2019-08-16 17:06:03 +00:00
luigi1111
310c26824d
Merge pull request #5756
28c3e73 gitian build README improvements (jonathancross)
2019-08-15 17:34:13 -05:00
luigi1111
8a0711f2f2
Merge pull request #5674
fcbf7b3 p2p: propagate out peers limit to payload handler (moneromooo-monero)
098aadf p2p: close the right number of connections on setting max in/out peers (moneromooo-monero)
2019-08-15 17:22:39 -05:00
luigi1111
df064eaa36
Merge pull request #5649
a182df2 Bans for RPC connections (hyc)
2019-08-15 17:10:49 -05:00
Tom Smeding
bdcdb0e813 Remove unused code under WINDWOS_PLATFORM guard
This code has been present, unchanged, ever since the original move to
github in 2014 with commit 296ae46ed.
2019-08-15 14:57:27 +02:00
Jonathan Cross
e3cff3d766
Gitian build script fixes for MacOS 2019-08-06 23:18:31 +02:00
Thomas Winget
155475d971
Add IPv6 support
new cli options (RPC ones also apply to wallet):
  --p2p-bind-ipv6-address (default = "::")
  --p2p-bind-port-ipv6    (default same as ipv4 port for given nettype)
  --rpc-bind-ipv6-address (default = "::1")

  --p2p-use-ipv6          (default false)
  --rpc-use-ipv6          (default false)

  --p2p-require-ipv4      (default true, if ipv4 bind fails and this is
                           true, will not continue even if ipv6 bind
                           successful)
  --rpc-require-ipv4      (default true, description as above)

ipv6 addresses are to be specified as "[xx:xx:xx::xx:xx]:port" except
in the cases of the cli args for bind address.  For those the square
braces can be omitted.
2019-07-31 20:04:57 -04:00
Jonathan Cross
28c3e736fb
gitian build README improvements 2019-07-30 17:30:43 +02:00
luigi1111
e675b5223f
Merge pull request #5627
afbf05b Add option to run gitian-build.py on non-debian os (TheCharlatan)
2019-07-24 14:41:44 -05:00
luigi1111
38e0e58a95
Merge pull request #5531
9a6006b abstract_tcp_server2: move some things out of a lock (moneromooo-monero)
2019-07-24 14:08:52 -05:00
luigi1111
e579fe4ae0
Merge pull request #5530
6abaaaa remove obsolete save_graph skeleton code (moneromooo-monero)
2019-07-24 14:07:29 -05:00
luigi1111
8774384ace
Merge pull request #5528
f61a315 net_utils: fix m_ssl type from time_t to bool (moneromooo-monero)
2019-07-24 14:05:18 -05:00
Jonathan Cross
f26e663a7b
Gitian build (mac, linux): gzip => bzip2 2019-07-18 23:02:36 +02:00
Lee Clagett
3b24b1d082 Added support for "noise" over I1P/Tor to mask Tx transmission. 2019-07-17 14:22:37 +00:00
Lee Clagett
bdfc63ae4d Add ref-counted buffer byte_slice. Currently used for sending TCP data. 2019-07-16 16:30:35 +00:00
moneromooo-monero
65c4004963
allow blocking whole subnets 2019-07-16 11:35:53 +00:00
luigi1111
f9a3d7fec8
Merge pull request #5704
8f22279 Depends: Update HIDAPI version (TheCharlatan)
2019-07-12 20:21:41 -05:00
TheCharlatan
9a5933f705 Gitian: Add version string to output tar archives
The tar archives generated by gitian are currently unversioned. This
adds either a tag name when building from a tag, or a short commit id
when building from a commit hash.
2019-06-27 22:25:20 +02:00
TheCharlatan
8f2227940d Depends: Update HIDAPI version
The macos binaries in release v0.14.1.0 were compiled with the buggy
hidapi-0.8.0-rc1 version. This resulted in users not being able to use
their Ledger with the latest cli wallet. After the patch depends now
fetches the source from the libusb hidapi repository that has taken over
maintenance of hidapi.
2019-06-27 17:32:46 +02:00
TheCharlatan
59eecc7ed1 Update icu4c to latest support version
Before this commit the icu4c repo was fetched from TheCharlatan's
repository. This step was made, because up until recently the source
code was hosted on sourceforge and their downloads proved very
unreliable. The origin is now the official icu4c repository.
Also remove some commented lines left over from development.
2019-06-27 16:31:28 +02:00
TheCharlatan
afbf05bc58 Add option to run gitian-build.py on non-debian os
This commits adds the `--no-apt` flag to the gitian-build.py script.
This allows gitian builds to be run without root access and non-debian
based operating systems.
2019-06-26 01:21:59 +02:00
TheCharlatan
496cd46d80 Add ncurses package for linux and darwin readline
Readline support is now compiled with the ncurses backend.
2019-06-25 19:16:20 +02:00
TheCharlatan
cbbb24cfe1 Remove clutter in depends installed packages
To speedup the depends cached builds, remove some some clutter from the package
files. This mainly incldues removing all the shared libraries and .la
linker files. It also gives stronger guarantees that monero only links
the static libs without any external rvalues.
2019-06-25 09:21:33 +02:00
TheCharlatan
1dbfc812e1 Add debug targets to depends Makefile
Packages can now be built individually and for each stage. This allows
easier debugging.
2019-06-25 09:20:47 +02:00
moneromooo-monero
098aadf084
p2p: close the right number of connections on setting max in/out peers 2019-06-19 11:49:36 +00:00
Howard Chu
a182df21d0
Bans for RPC connections
Make bans control RPC sessions too. And auto-ban some bad requests.
Drops HTTP connections whenever response code is 500.
2019-06-16 11:38:08 +01:00
moneromooo-monero
0564da5fdc
ensure no NULL is passed to memcpy
NULL is valid when size is 0, but memcpy uses nonnull attributes,
so let's not poke the bear
2019-06-14 08:47:29 +00:00
moneromooo-monero
bc09766bf9
abstract_tcp_server2: improve DoS resistance 2019-06-14 08:47:26 +00:00
moneromooo-monero
39169ace09
epee: basic sanity check on allocation size from untrusted source
Reported by guidov
2019-06-14 08:47:01 +00:00
luigi1111
7b3df89bd4
Merge pull request #5632
3a0fbea Don't use -march=native (hyc)
f8b2f25 Allow parallel make (hyc)
01ced20 Delete redundant cppzmq dependency (hyc)
1dc4ebf Use 9 digit build IDs (hyc)
2019-06-12 14:47:33 -05:00
luigi1111
a22bb544a3
Merge pull request #5552
c27d961 [depends] update openssl to 1.0.2r (who-biz)
2019-06-12 14:43:51 -05:00
Howard Chu
1dc4ebfd6c
Use 9 digit build IDs 2019-06-12 16:47:33 +01:00
Howard Chu
01ced20eca
Delete redundant cppzmq dependency 2019-06-12 10:20:44 +01:00
Howard Chu
f8b2f250b7
Allow parallel make 2019-06-12 09:00:50 +01:00
Howard Chu
3a0fbea1ff
Don't use -march=native 2019-06-12 09:00:44 +01:00
luigi1111
9c0e9c40ec
Merge pull request #5618
b0a04f7 epee: fix SSL autodetect on reconnection (xiphon)
2019-06-11 18:15:48 -05:00
xiphon
b0a04f7d45 epee: fix SSL autodetect on reconnection 2019-06-10 10:40:16 +00:00
moneromooo-monero
35c20c4332
Fix GCC 9.1 build warnings
GCC wants operator= aand copy ctor to be both defined, or neither
2019-06-09 09:39:18 +00:00
Lee Clagett
3544596f9f Add ssl_options support to monerod's rpc mode. 2019-05-22 00:09:11 -04:00
who-biz
c27d96129e [depends] update openssl to 1.0.2r
- This addresses https://www.openssl.org/news/secadv/20190226.txt (CVE: 2019-1559) which impacted all versions of openssl-1.0.

Note that this does not address CVE-2019-1543 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-1543), which impacts all versions of openssl 1.1 through 1.1.0j and 1.1.1b.

The above (1.1) is patched in openssl, where it was marked as low severity.  Similar issues possibly present in monero, should be looked into w.r.t. CVE-2019-1543.
2019-05-18 02:18:55 -04:00
Riccardo Spagni
e8487fa46b
Merge pull request #5539
3f612cda Changed odd bullet point to low level header (Rohaq)
af9bc4ec Used subeaders to avoid slightly wonky looking formatting (Rohaq)
1873af35 Made code block usage consistent across all .md files (Rohaq)
68103075 Updated Copyright notice (Rohaq)
39bd157f Added Table of Contents to main README.md (Rohaq)
2019-05-15 16:10:41 +02:00
luigi1111
14723fc6e7
Merge pull request #5527
9a7a453 net_ssl: free certs after setting them up (moneromooo-monero)
2019-05-14 15:55:25 -05:00
luigi1111
1fc1c7318c
Merge pull request #5519
b8b957d cmake: fix incorrect hint for OPENSSL_ROOT_DIR (moneromooo-monero)
367bb80 mlog: default to not showing SSL errors (moneromooo-monero)
2019-05-14 15:52:32 -05:00
Rohaq
1873af35bf Made code block usage consistent across all .md files 2019-05-12 05:16:26 +01:00
moneromooo-monero
9a6006bad8
abstract_tcp_server2: move some things out of a lock
The lock is meant for the network throttle object only,
and this should help coverity get unconfused
2019-05-10 14:18:11 +00:00
moneromooo-monero
6abaaaa994
remove obsolete save_graph skeleton code 2019-05-10 14:17:18 +00:00
moneromooo-monero
f61a315e8b
net_utils: fix m_ssl type from time_t to bool 2019-05-10 14:14:49 +00:00
moneromooo-monero
9a7a453f25
net_ssl: free certs after setting them up 2019-05-10 00:16:49 +00:00
Riccardo Spagni
c0bc6d96cd
Merge pull request #5509
a62e0725 net_ssl: SSL config tweaks for compatibility and security (moneromooo-monero)
2019-05-07 17:39:20 +02:00
Riccardo Spagni
2d04b0e500
Merge pull request #5499
a4c4a2d8 blockchain: keep a rolling long term block weight median (moneromooo-monero)
2019-05-07 17:31:45 +02:00
Riccardo Spagni
123df0eaf7
Merge pull request #5419
f29fecd5 build: debug and test builds via contrib (Dusan Klinec)
2019-05-07 17:26:32 +02:00
moneromooo-monero
a62e072571
net_ssl: SSL config tweaks for compatibility and security
add two RSA based ciphers for Windows/depends compatibility
also enforce server cipher ordering
also set ECDH to auto because vtnerd says it is good :)

When built with the depends system, openssl does not include any
cipher on the current whitelist, so add this one, which fixes the
problem, and does seem sensible.
2019-05-07 10:01:42 +00:00
moneromooo-monero
367bb80ae7
mlog: default to not showing SSL errors 2019-05-06 07:38:52 +00:00
moneromooo-monero
a4c4a2d8aa
blockchain: keep a rolling long term block weight median 2019-05-02 09:47:01 +00:00
moneromooo-monero
5e0da6fb68
change SSL certificate fingerprint whitelisting from SHA1 to SHA-256
SHA1 is too close to bruteforceable
2019-04-26 11:37:15 +00:00
Riccardo Spagni
5d09e39174
Merge pull request #5482
9956500d net_helper: clear recv buffer on eof (moneromooo-monero)
2019-04-24 22:40:12 +02:00
Riccardo Spagni
d86dd5fa7c
Merge pull request #5479
edbae2d0 levin_protocol_handler_async: tune down preallocation a fair bit (moneromooo-monero)
2019-04-24 22:39:30 +02:00
moneromooo-monero
9956500d14
net_helper: clear recv buffer on eof 2019-04-23 13:23:17 +00:00
moneromooo-monero
edbae2d05b
levin_protocol_handler_async: tune down preallocation a fair bit
It can allocate a lot when getting a lot of connections
(in particular, the stress test on windows apparently pushes
that memory to actual use, rather than just allocated)
2019-04-22 22:35:32 +00:00
moneromooo-monero
7a9316ebef
serialization: set default log category 2019-04-21 09:26:25 +00:00
moneromooo-monero
b672d4d6e5
epee: use boost/timer/timer.hpp, boost/timer.hpp is deprecated 2019-04-18 15:12:34 +00:00
Riccardo Spagni
ba1b6d36c4
Merge pull request #5447
02c01c0b Add Brewfile to allow for an even easier management of dependencies (Florian)
2019-04-16 22:47:56 +02:00
Riccardo Spagni
c8ce4217cf
Merge pull request #5445
b18f0b10 wallet: new --offline option (moneromooo-monero)
2019-04-16 22:46:53 +02:00
Riccardo Spagni
e9527f5eed
Merge pull request #5436
61d63900 net_helper: avoid unnecessary memcpy (moneromooo-monero)
2019-04-16 22:43:15 +02:00
Riccardo Spagni
c603044398
Merge pull request #5432
c3cf930f abstract_tcp_server2: fix timeout on exit (moneromooo-monero)
2019-04-16 22:41:18 +02:00
Florian
02c01c0bd8 Add Brewfile to allow for an even easier management of dependencies 2019-04-15 14:46:26 +02:00
moneromooo-monero
b18f0b1051
wallet: new --offline option
It will avoid connecting to a daemon (so useful for cold signing
using a RPC wallet), and not perform DNS queries.
2019-04-15 09:14:12 +00:00
Riccardo Spagni
e46dc055d1
Merge pull request #5369
e72c2c5d do not build in parallel as it is non-deterministic (Jane Mercer)
2019-04-15 09:13:48 +02:00
moneromooo-monero
61d63900b9
net_helper: avoid unnecessary memcpy 2019-04-13 13:24:58 +00:00
moneromooo-monero
c3cf930f75
abstract_tcp_server2: fix timeout on exit
When closing connections due to exiting, the IO service is
already gone, so the data exchange needed for a gracious SSL
shutdown cannot happen. We just close the socket in that case.
2019-04-12 18:13:31 +00:00
moneromooo-monero
4b3bb829c2
epee: init a new ssl related variable in ctor 2019-04-11 11:10:15 +00:00
moneromooo-monero
9f8dc4ce51
simplewallet: new net_stats command
displays total sent and received bytes
2019-04-11 10:46:41 +00:00
Dusan Klinec
f29fecd517
build: debug and test builds via contrib 2019-04-10 15:43:52 +02:00
Lee Clagett
2e578b8214 Enabling daemon-rpc SSL now requires non-system CA verification
If `--daemon-ssl enabled` is set in the wallet, then a user certificate,
fingerprint, or onion/i2p address must be provided.
2019-04-07 13:02:43 -04:00
Lee Clagett
d58f368289 Require manual override for user chain certificates.
An override for the wallet to daemon connection is provided, but not for
other SSL contexts. The intent is to prevent users from supplying a
system CA as the "user" whitelisted certificate, which is less secure
since the key is controlled by a third party.
2019-04-07 00:44:37 -04:00
Lee Clagett
97cd1fa98d Only check top-level certificate against fingerprint list.
This allows "chain" certificates to be used with the fingerprint
whitelist option. A user can get a system-ca signature as backup while
clients explicitly whitelist the server certificate. The user specified
CA can also be combined with fingerprint whitelisting.
2019-04-07 00:44:37 -04:00
Lee Clagett
7c388fb358 Call use_certificate_chain_file instead of use_certificate_file
The former has the same behavior with single self signed certificates
while allowing the server to have separate short-term authentication
keys with long-term authorization keys.
2019-04-07 00:44:37 -04:00
Lee Clagett
eca0fea45a Perform RFC 2818 hostname verification in client SSL handshakes
If the verification mode is `system_ca`, clients will now do hostname
verification. Thus, only certificates from expected hostnames are
allowed when SSL is enabled. This can be overridden by forcible setting
the SSL mode to autodetect.

Clients will also send the hostname even when `system_ca` is not being
performed. This leaks possible metadata, but allows servers providing
multiple hostnames to respond with the correct certificate. One example
is cloudflare, which getmonero.org is currently using.
2019-04-07 00:44:37 -04:00
Lee Clagett
0416764cae Require server verification when SSL is enabled.
If SSL is "enabled" via command line without specifying a fingerprint or
certificate, the system CA list is checked for server verification and
_now_ fails the handshake if that check fails. This change was made to
remain consistent with standard SSL/TLS client behavior. This can still
be overridden by using the allow any certificate flag.

If the SSL behavior is autodetect, the system CA list is still checked
but a warning is logged if this fails. The stream is not rejected
because a re-connect will be attempted - its better to have an
unverified encrypted stream than an unverified + unencrypted stream.
2019-04-07 00:44:37 -04:00
Lee Clagett
96d602ac84 Add verify_fail_if_no_cert option for proper client authentication
Using `verify_peer` on server side requests a certificate from the
client. If no certificate is provided, the server silently accepts the
connection and rejects if the client sends an unexpected certificate.
Adding `verify_fail_if_no_cert` has no affect on client and for server
requires that the peer sends a certificate or fails the handshake. This
is the desired behavior when the user specifies a fingerprint or CA file.
2019-04-07 00:44:37 -04:00
Lee Clagett
21eb1b0725 Pass SSL arguments via one class and use shared_ptr instead of reference 2019-04-07 00:44:37 -04:00
Lee Clagett
f18a069fcc Do not require client certificate unless server has some whitelisted.
Currently a client must provide a certificate, even if the server is
configured to allow all certificates. This drops that requirement from
the client - unless the server is configured to use a CA file or
fingerprint(s) for verification - which is the standard behavior for SSL
servers.

The "system-wide" CA is not being used as a "fallback" to verify clients
before or after this patch.
2019-04-06 23:47:06 -04:00
Lee Clagett
a3b0284837 Change SSL certificate file list to OpenSSL builtin load_verify_location
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.

This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
2019-04-06 23:47:06 -04:00
Riccardo Spagni
0baf26c8d6
Merge pull request #5375
1569776a Add missing include (Leon Klingele)
2019-04-06 16:04:06 +02:00
Riccardo Spagni
17fefb8786
Merge pull request #5358
dffdccdc No longer use deprecated RSA_generate_key in favor of RSA_generate_key_ex (Martijn Otto)
2019-04-06 16:02:31 +02:00
Riccardo Spagni
38317f384c
Merge pull request #5348
59776a64 epee: some more minor JSON parsing speedup (moneromooo-monero)
2019-04-06 16:00:18 +02:00
Riccardo Spagni
1ed6441925
Merge pull request #5327
c23ea796 New interactive daemon command 'print_net_stats': Global traffic stats (rbrunner7)
2019-04-01 17:32:01 +02:00
Riccardo Spagni
87840192dd
Merge pull request #5309
43042a28 Implement array_entry_t copy constructor (Guido Vranken)
2019-04-01 17:28:08 +02:00
Leon Klingele
1569776a52
Add missing include 2019-03-31 18:39:25 +02:00
Jane Mercer
e72c2c5dcc do not build in parallel as it is non-deterministic 2019-03-29 10:31:35 -07:00
Martijn Otto
dffdccdc9e
No longer use deprecated RSA_generate_key in favor of
RSA_generate_key_ex
2019-03-27 13:23:30 +01:00
moneromooo-monero
59776a64ff
epee: some more minor JSON parsing speedup 2019-03-25 14:29:29 +00:00
Lee Clagett
7acfa9f3cc Added socks proxy (tor/i2pd/kovri) support to wallet 2019-03-25 01:35:13 +00:00
Riccardo Spagni
676b17d36d
Merge pull request #5285
6ef816de console_handler: print newline on EOF (moneromooo-monero)
2019-03-24 19:38:04 +02:00
rbrunner7
c23ea7962d New interactive daemon command 'print_net_stats': Global traffic stats 2019-03-24 16:58:57 +01:00
Riccardo Spagni
f5d7652f73
Merge pull request #5283
16590294 abstract_tcp_server2: fix crashy race on socket shutdown (moneromooo-monero)
2019-03-21 14:53:03 +02:00
Riccardo Spagni
5259dd7a14
Merge pull request #5259
9141a0a1 connection_basic: remove debug exception ^_^ (moneromooo-monero)
2019-03-21 14:49:09 +02:00
moneromooo-monero
17769db946
epee: fix build with boost 1.70.0
get_io_service was deprecated, and got removed
2019-03-21 11:02:02 +00:00
moneromooo-monero
1659029469
abstract_tcp_server2: fix crashy race on socket shutdown 2019-03-19 16:50:00 +00:00
Guido Vranken
43042a28ec Implement array_entry_t copy constructor
Manually initialize the array_entry_t iterator to ensure it points
to the correct m_array, thereby preventing a potential use-after-free
situation.

Signed-off-by: Guido Vranken <guidovranken@gmail.com>
2019-03-18 00:49:12 +01:00
Riccardo Spagni
4c91eb23a0
Merge pull request #5061
1f2930ce Update 2019 copyright (binaryFate)
2019-03-17 17:49:30 +02:00
moneromooo-monero
6ef816de2b
console_handler: print newline on EOF
This avoids the annoying case where the shell prints its prompt
after the last line from Monero output, causing line editing to
sometimes go wonky, for lack of a better term
2019-03-13 16:52:22 +00:00
Dusan Klinec
bb8eab24da
epee: certificate generation fix, pkey deleted
- pkey gets deleted by the pkey_deleter but the caller tries to serialize it which causes errors as the memory is freed
2019-03-10 20:09:51 +01:00
moneromooo-monero
9141a0a1ef
connection_basic: remove debug exception ^_^ 2019-03-08 20:13:51 +00:00
Howard Chu
b8c2e21cba
Fix startup errors with SSL cert generation
Use SSL API directly, skip boost layer
2019-03-08 15:15:24 +00:00
binaryFate
1f2930ce0b Update 2019 copyright 2019-03-05 22:05:34 +01:00
Martijn Otto
057c279cb4
epee: add SSL support
RPC connections now have optional tranparent SSL.

An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.

SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.

Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.

To generate long term certificates:

openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT

/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.

SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
2019-03-05 14:16:08 +01:00
TheCharlatan
5057eb1199
cmake: ARCH_ID fixes for cross compilation 2019-03-05 10:24:14 +00:00
moneromooo-monero
e396146aee
default initialize rpc structures 2019-03-04 22:38:03 +00:00
Riccardo Spagni
c83e80c263
Merge pull request #5162
4d3b61a3 Use io_service::work in epee tcp server (Lee Clagett)
2019-03-04 21:33:48 +02:00
Riccardo Spagni
f18a7e39b8
Merge pull request #5160
7af4fbd4 epee: Add space after ':' in additional http response headers (Tom Smeding)
2019-03-04 21:33:24 +02:00
Riccardo Spagni
5260111631
Merge pull request #5146
4a9257b4 Support docker for gitian builds (TheCharlatan)
2019-03-04 21:32:30 +02:00
Riccardo Spagni
d70de1150a
Merge pull request #5136
7da7a9bb Update openssl to 1.0.2q in depends build system (who-biz)
2019-03-04 21:29:28 +02:00
Riccardo Spagni
933c701c6e
Merge pull request #5133
f0fc4064 Various speedups to depends and Travis (TheCharlatan)
2019-03-04 21:28:56 +02:00
Riccardo Spagni
4a390d43f8
Merge pull request #5113
c0e9e805 Fixed missing return value in once_a_time class on windows (Markus Behm)
2019-03-04 21:25:44 +02:00
Riccardo Spagni
a28237c9ca
Merge pull request #5102
1eef0565 performance_tests: better stats, and keep track of timing history (moneromooo-monero)
2019-03-04 21:22:51 +02:00
Riccardo Spagni
722a856d7e
Merge pull request #5096
7c3ade44 network_throttle: use circular_buffer where appropriate (moneromooo-monero)
2019-03-04 21:21:25 +02:00
Riccardo Spagni
4466f4504e
Merge pull request #5091
123fc2a2 i2p: initial support (Jethro Grassie)
2019-03-04 21:20:34 +02:00
TheCharlatan
f0fc4064a0
Various speedups to depends and Travis
Further speedups to icu compilation, it is faster to run the
pre-generated configure scripts.

Ensure that the native protobuf installation only generates the required
libraries and binaries.

Disable qt compilation when running travis on windows. Qt is used for
lrelease, the travis recipe instead usese the a local installation of
lrelease.

Remove various packages and options from the travis recipe.

Update Readline to version 8.0. The previously used url 404'd sometimes,
use the official gnu ftp server instead.

Remove unused cmake config.
2019-02-23 15:34:59 +01:00
Tom Smeding
7af4fbd4d1 epee: Add space after ':' in additional http response headers 2019-02-18 14:56:28 +01:00
TheCharlatan
4a9257b464
Support docker for gitian builds
Building with docker is arguably easier and more familiar to most people
than either kvm, or lxc.

This commit also relaxes the back compat requirement a bit. 32 bit linux
now uses glibc version 2.0. Also, the docker shell could not handle gcc arguments
containing spaces, so the explicit '-DFELT_TYPE' declaration was dropped.

Lastly, this removes some packages from the osx descriptor.
2019-02-14 23:14:34 +01:00
Lee Clagett
4d3b61a31b Use io_service::work in epee tcp server 2019-02-10 13:40:32 -05:00
who-biz
7da7a9bbcc Update openssl to 1.0.2q in depends build system 2019-02-10 08:14:33 -05:00
Markus Behm
c0e9e80581 Fixed missing return value in once_a_time class on windows 2019-02-09 15:24:34 -05:00
moneromooo-monero
2456945408
epee: add SSL support
RPC connections now have optional tranparent SSL.

An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.

SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.

Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.

To generate long term certificates:

openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT

/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.

SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
2019-02-02 20:05:33 +00:00
moneromooo-monero
7c3ade4410
network_throttle: use circular_buffer where appropriate 2019-02-01 21:33:13 +00:00
Jethro Grassie
123fc2a25a
i2p: initial support 2019-01-30 13:37:45 -05:00
Lee Clagett
973403bc9f Adding initial support for broadcasting transactions over Tor
- Support for ".onion" in --add-exclusive-node and --add-peer
  - Add --anonymizing-proxy for outbound Tor connections
  - Add --anonymous-inbounds for inbound Tor connections
  - Support for sharing ".onion" addresses over Tor connections
  - Support for broadcasting transactions received over RPC exclusively
    over Tor (else broadcast over public IP when Tor not enabled).
2019-01-28 23:56:33 +00:00
Riccardo Spagni
1e5cd3b35a
Merge pull request #5062
acfff8d0 rpc: fix internal daemon calls in restricted rpc getting partial data (moneromooo-monero)
2019-01-28 21:40:11 +02:00
moneromooo-monero
acfff8d0ce
rpc: fix internal daemon calls in restricted rpc getting partial data 2019-01-28 19:35:20 +00:00
Riccardo Spagni
d214992a7f
Merge pull request #5073
45ea19fa bump sodium to 1.0.16 (italocoin)
2019-01-28 21:33:11 +02:00
Riccardo Spagni
fbecfc3c8f
Merge pull request #5065
ca86ef1b readline: don't dereference possible NULL pointer (Jethro Grassie)
2019-01-28 21:31:20 +02:00
moneromooo-monero
1eef056588
performance_tests: better stats, and keep track of timing history 2019-01-28 15:45:37 +00:00
moneromooo-monero
b750fb27b0
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.

No other data is currently pruned.

There are three ways to prune a blockchain:

- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility

The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.

The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.

Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2019-01-22 20:30:51 +00:00
Jethro Grassie
ca86ef1beb
readline: don't dereference possible NULL pointer 2019-01-21 01:57:14 -05:00
Riccardo Spagni
b65106ce93
Merge pull request #5017
21777daf epee: speedup word/number matching (moneromooo-monero)
2019-01-18 09:24:41 +02:00
TheCharlatan
b4433abc64
Optimize the depends builds for faster compilation
This includes more fine grained configure options and skipping the
openssl and zlib dependencies when compiling qt. The zlib and libevent
packages are removed.
2019-01-17 13:23:24 +01:00
moneromooo-monero
21777daf6e
epee: speedup word/number matching
Number matching semantics are slightly changed: since this is used
as a filter to check whether a number is signed and/or floating
point, we can speed this up further. strto* functions are called
afterwards and will error out where necessary. We now also accept
numbers like .4 which were not accepted before.

The strto* calls on a boost::string_ref will not access unallocated
memory since the parsers always stop at the first bad character,
and the original string is zero terminated.

in arbitrary time measurement units for some arbitrary test case:

match_number2: 235 -> 70
match_word2: 330 -> 108
2019-01-16 19:59:40 +00:00
Riccardo Spagni
246b28e47a
Merge pull request #5022
37a9bcf4 Remove visibility settings from boost.mk (TheCharlatan)
2019-01-16 21:37:52 +02:00
Riccardo Spagni
a093a7569e
Merge pull request #5021
b82efa32 epee: speed up json parsing (moneromooo-monero)
2019-01-16 21:37:29 +02:00
Riccardo Spagni
3e9bb9626a
Merge pull request #5001
a5ffc2d5 Remove boost::lexical_cast for uuid and unused uuid function (Lee Clagett)
2019-01-16 19:27:13 +02:00
Riccardo Spagni
846362842c
Merge pull request #4976
85665003 epee: better network buffer data structure (moneromooo-monero)
2019-01-16 19:04:22 +02:00
italocoin
45ea19fafb bump sodium to 1.0.16 2019-01-15 07:35:45 -05:00
Riccardo Spagni
e723eb960d
Merge pull request #4951
b21a60ef mlocker: set default log category (moneromooo-monero)
2019-01-06 20:38:33 +02:00
Riccardo Spagni
3ce7977389
Merge pull request #4950
68f045de easylogging++: check allowed categories before logging (moneromooo-monero)
2019-01-06 20:38:10 +02:00
Riccardo Spagni
13b006137c
Merge pull request #4949
5464725a protocol: change standby mode to not wait sleeping (moneromooo-monero)
85807dfb add a once_a_time_milliseconds class (moneromooo-monero)
2019-01-06 20:37:51 +02:00
Riccardo Spagni
ad1eb3338c
Merge pull request #4938
a13eb0a1 epee: speed up string matching a bit (moneromooo-monero)
3a3858dc epee: avoid string allocation when parsing a pod from string (moneromooo-monero)
2019-01-06 20:36:46 +02:00
luigi1111
53760ee044
Merge pull request #4957
0e2f5cb perf_timer: make all logs Info level (moneromooo-monero)
2018-12-31 16:30:47 -06:00
luigi1111
9c2d671397
Merge pull request #4945
e37154a build: protobuf dependency fixes, libusb build (ph4r05)
2018-12-31 15:53:59 -06:00
luigi1111
d8c03191ca
Merge pull request #4933
3cf85f0 Changed RECIEVED to RECEIVED in log messages. (normoes)
2018-12-31 15:33:18 -06:00
luigi1111
3adac4ee2b
Merge pull request #4929
5a76933 Add glibc back compat code (TheCharlatan)
2018-12-31 15:31:01 -06:00
luigi1111
c93c638199
Merge pull request #4864
707c2f8 Remove -Werror (moneromooo-monero)
2018-12-31 15:13:59 -06:00
TheCharlatan
37a9bcf483 Remove visibility settings from boost.mk
Clang gave a visibility error when compiling boost with visibility
hidden.
2018-12-27 23:30:22 +01:00
moneromooo-monero
b82efa32e7
epee: speed up json parsing 2018-12-27 14:28:30 +00:00
moneromooo-monero
85665003a7
epee: better network buffer data structure
avoids pointless allocs and memcpy
2018-12-23 16:46:07 +00:00
Lee Clagett
a5ffc2d5ad Remove boost::lexical_cast for uuid and unused uuid function 2018-12-23 11:11:30 +00:00
Dusan Klinec
e37154a879
build: protobuf dependency fixes, libusb build
- docker protobuf dependencies, cross-compilation
- device/trezor protobuf build fixes, try_compile
- libusb built under all platforms, used by trezor for direct connect
2018-12-18 16:50:19 +01:00
TheCharlatan
118db4f357 Cleanup leftovers from migrating depends from bitcoin
Depends still contained some leftovers, like the `wallet` target that
included bdb from bitcoin. This commit removes these unneeded targets,
the miniupnpc package and the berkeley db package. Reflect the changes
in the README as well.
2018-12-12 12:14:20 +01:00
Riccardo Spagni
5e9225e637
Merge pull request #4925
ab783b17 easylogging++: ensure logger is initialized before main (moneromooo-monero)
9b69a0ae daemon: print monero version at startup when calling a detached daemon (moneromooo-monero)
4d71d463 mlocker: remove early page size log (moneromooo-monero)
2018-12-12 12:01:18 +02:00
Riccardo Spagni
2dd6fe4898
Merge pull request #4900
4f74a31e http -> https (Dimitris Apostolou)
2018-12-12 11:56:55 +02:00
Riccardo Spagni
5123749d79
Merge pull request #4840
721aacd8 easylogging++: faster access to logging (moneromooo-monero)
7cc27b36 Revert "easylogging++: make the logger handle early/late logging" (moneromooo-monero)
2018-12-12 11:54:11 +02:00
moneromooo-monero
0e2f5cb5fc
perf_timer: make all logs Info level
and make them not default at log level 1
2018-12-08 10:53:09 +00:00
moneromooo-monero
a13eb0a1a4
epee: speed up string matching a bit 2018-12-08 02:00:37 +00:00
moneromooo-monero
3a3858dc90
epee: avoid string allocation when parsing a pod from string 2018-12-08 02:00:34 +00:00
moneromooo-monero
68f045de8c
easylogging++: check allowed categories before logging 2018-12-07 13:25:39 +00:00
moneromooo-monero
b21a60efd9
mlocker: set default log category 2018-12-07 13:13:24 +00:00
moneromooo-monero
85807dfb25
add a once_a_time_milliseconds class 2018-12-07 12:36:33 +00:00
Riccardo Spagni
16dc6900fb
Merge pull request #4883
40485a73 mlocker: fix access to global lock map after dtor on exit (moneromooo-monero)
2018-12-04 17:30:46 +02:00
Riccardo Spagni
e799fc87ae
Merge pull request #4866
9c923bad epee: fix network packet header field endianness (moneromooo-monero)
ec1a62b5 move int-util.h to epee (moneromooo-monero)
2018-12-04 17:30:11 +02:00
Riccardo Spagni
d4a0fb2b89
Merge pull request #4880
96e6b439 blockchain_stats: don't use gmtime_r on Windows (moneromooo-monero)
2018-12-04 17:29:46 +02:00
Riccardo Spagni
3d745573d7
Merge pull request #4876
1132436f Only show a single mlock() error, to avoid flooding the log (Martijn Otto)
2018-12-04 17:16:29 +02:00
Riccardo Spagni
f6e8ab0dc6
Merge pull request #4875
23829ebb mlocker: don't throw from lock/unlock (moneromooo-monero)
2018-12-04 17:15:07 +02:00
moneromooo-monero
9c923bad9b
epee: fix network packet header field endianness 2018-12-04 15:14:32 +00:00
moneromooo-monero
ec1a62b50d
move int-util.h to epee 2018-12-04 15:14:29 +00:00
Riccardo Spagni
c00ac446fd
Merge pull request #4854
bd98e99c Removed a lot of unnecessary includes (Martijn Otto)
2018-12-04 17:08:42 +02:00
Riccardo Spagni
398f7076bb
Merge pull request #4853
2b3595d0 various: do not propagate exception through dtor (moneromooo-monero)
2018-12-04 17:07:51 +02:00
Riccardo Spagni
40650b43b8
Merge pull request #4850
b36353e2 unit_tests: add some hex parsing test for non hex input (xiphon)
6671110c unit_tests: add a test for parse_hexstr_to_binbuff (moneromooo-monero)
f6187cd8 epee: speed up parse_hexstr_to_binbuff a little (Howard Chu)
2018-12-04 17:07:19 +02:00
Norman Moeschter
3cf85f0e83
Changed RECIEVED to RECEIVED in log messages. 2018-12-04 07:27:08 +01:00
TheCharlatan
5a76933903 Add glibc back compat code
To ensure that the binaries compiled by gitian run across many linux
distributions, enforce 2.17 as the minimum libc version supported.
2018-12-04 02:21:06 +01:00
Dimitris Apostolou
4f74a31ecd
http -> https 2018-12-01 12:57:37 +02:00
moneromooo-monero
4d71d46373
mlocker: remove early page size log
It comes before the logger is initialized, so gets displayed
even though it should not be by default, and apparenly comes
too early for (some versions of) Android, where it crashes.
2018-11-30 16:52:50 +00:00
moneromooo-monero
721aacd88e
easylogging++: faster access to logging
Turns out getting the global shared_ptr hits the profile,
and passing it around still keeps it at close to ~1% CPU,
which is too much for mostly silent logging.

Leak the object instead, which is even safer for late logging.
2018-11-27 13:55:21 +00:00
moneromooo-monero
fc98f7a0a1
rpc: speedup get_outs.bin 2018-11-26 18:56:23 +00:00
Riccardo Spagni
b37ce24cdd
Merge pull request #4824
2ffe53d9 device/trezor: webusb transport added, cmake fixes (Dusan Klinec)
2018-11-26 20:27:29 +02:00
Riccardo Spagni
299accd81f
Merge pull request #4819
7c298f5d No longer use a list for registering self references in the abstract tcp server (Martijn Otto)
2018-11-26 20:26:28 +02:00
Martijn Otto
1132436f97
Only show a single mlock() error, to avoid flooding the log 2018-11-26 09:37:07 +01:00
Dusan Klinec
2ffe53d9e6
device/trezor: webusb transport added, cmake fixes
- webusb transport based on libusb added. Provides direct access to Trezor via USB, no need for Trezor bridge.
- trezor protocol message handler improved, no recursion used. Ready for upcoming integration tests.
- libusb (for docker) bumped from v1.0.9 to v1.0.22, newer version required for webusb transport, for device enumeration.
- cmake improvements and fixes. Cmake Trezor checks are moved to a dedicated CheckTrezor.cmake file. In case of a problem Trezor is excluded from build.
- ifdefs made consistent to Ledger.
- UDP Transport enumeration disabled by default in release mode
2018-11-25 11:57:19 +01:00
moneromooo-monero
40485a73b6
mlocker: fix access to global lock map after dtor on exit
as the lock, it now leaks
2018-11-22 01:43:42 +00:00
moneromooo-monero
96e6b43970
blockchain_stats: don't use gmtime_r on Windows
In some cases, it doesn't like it (I don't know the details).

Factor into a new epee function
2018-11-21 00:50:53 +00:00
moneromooo-monero
23829ebb09
mlocker: don't throw from lock/unlock
This prevents exceptions from showing up in various awkward
places such as dtors, since the only exception that can be
thrown is a lock failure, and nothing handles a lock failure
anyway.
2018-11-20 15:26:00 +00:00
moneromooo-monero
707c2f836b
Remove -Werror
It is an annoying piece of garbage
2018-11-17 13:15:03 +00:00
Riccardo Spagni
d850e05b53
Merge pull request #4820
e27e421f Fix version prefix in gitian build (TheCharlatan)
2018-11-16 11:18:11 +02:00
Riccardo Spagni
a3d0c7c55c
Merge pull request #4807
b620443b epee: log HTTP/RPC calls at info level (moneromooo-monero)
2018-11-16 11:17:18 +02:00
Riccardo Spagni
42dbb3aa1b
Merge pull request #4785
0cfd2ae5 mlocker: fix dtor ordering problem (moneromooo-monero)
2018-11-16 11:06:09 +02:00
Riccardo Spagni
3880cae134
Merge pull request #4775
741e4a11 epee: speed up json number parsing (moneromooo-monero)
2018-11-16 11:00:56 +02:00
Howard Chu
f6187cd811
epee: speed up parse_hexstr_to_binbuff a little 2018-11-15 23:34:15 +00:00
Martijn Otto
bd98e99c80
Removed a lot of unnecessary includes 2018-11-15 17:29:34 +01:00
moneromooo-monero
2b3595d0fe
various: do not propagate exception through dtor
Coverity 189689, 189690, 189692, 189695
2018-11-15 15:53:21 +00:00
Riccardo Spagni
59e8a4c306
Merge pull request #4753
157054b8 hardfork: initialize current_fork_index in ctor (moneromooo-monero)
2362baf7 network_throttle: initialize m_last_sample_time in ctor (moneromooo-monero)
d9400f69 serializtion: add missing mainnet and stagenet fields for 0mq (moneromooo-monero)
cbe0122b wallet2: initialize amount to 0 in tx_scan_info_t ctor (moneromooo-monero)
2018-11-14 21:33:02 +02:00
TheCharlatan
e27e421f98 Fix version prefix in gitian build
The version prefix 'v' should just be set constantly.
Reflect this change in the README as well.

This should allow building commits as well, if a commit
is passed in instead of a tag.
2018-11-07 18:30:49 +01:00
Martijn Otto
7c298f5d14
No longer use a list for registering self references in the abstract tcp
server

Updated assert message

Use a local variable that won't destruct at the end of the if-branch

Updated comment
2018-11-07 11:21:52 +01:00
Riccardo Spagni
fa56a09335
Merge pull request #4740
f067bb0c tests: fix MSYS2 warning 'MONERO_DEFAULT_LOG_CATEGORY redefined' (xiphon)
2018-11-06 21:32:18 +02:00
Riccardo Spagni
7ceeaec2e5
Merge pull request #4709
07c62809 epee: some minor speedup in parsing (moneromooo-monero)
2018-11-06 14:50:57 +02:00
Riccardo Spagni
dd973179ad
Merge pull request #3970
3381b651 abstract_tcp_server2: fix busy calling of idle IO service (moneromooo-monero)
2018-11-06 14:49:32 +02:00
moneromooo-monero
b620443b08
epee: log HTTP/RPC calls at info level
It's useful info to have when investigating logs
2018-11-05 16:14:06 +00:00
moneromooo-monero
0cfd2ae5e7
mlocker: fix dtor ordering problem
leak the mutex instead, it's a one off
2018-11-02 12:59:43 +00:00
moneromooo-monero
741e4a1172
epee: speed up json number parsing 2018-11-01 16:36:16 +00:00
moneromooo-monero
2362baf735
network_throttle: initialize m_last_sample_time in ctor
Coverity 136593
2018-10-29 16:23:14 +00:00
xiphon
f067bb0c8b tests: fix MSYS2 warning 'MONERO_DEFAULT_LOG_CATEGORY redefined' 2018-10-27 15:08:52 +00:00
Riccardo Spagni
6a54830107
Merge pull request #4646
109717a5 Remove Travis check in depends toolchain file (TheCharlatan)
2018-10-26 22:40:10 +02:00
Riccardo Spagni
442c58e994
Merge pull request #4573
8f3c7937 readline_buffer: fix "cursor in prompt" bug (moneromooo-monero)
2018-10-26 22:34:04 +02:00
Riccardo Spagni
a91b432591
Merge pull request #4526
8f96c718 Adapt Readme and script to monero gitian build signing (TheCharlatan)
9617fad0 Add OSX gitian descriptor (TheCharlatan)
d147d240 Add windows descriptor to gitian descriptors (TheCharlatan)
fed4e598 Change gitian.sigs repo from bitcoin-core to monero-project remote host (TheCharlatan)
f2127f9d Add checksums for download tools (TheCharlatan)
c2f17890 Add gitian build script (TheCharlatan)
6d0ca4e2 Prepare Depends Packages for Gitian Scripts (TheCharlatan)
2018-10-26 22:19:57 +02:00
moneromooo-monero
07c6280909
epee: some minor speedup in parsing 2018-10-24 08:34:25 +00:00
Riccardo Spagni
2c08fd472d
Merge pull request #4669
d3cda5ad console_handler: add a global log when exiting via EOF (moneromooo-monero)
2018-10-20 20:39:08 +02:00
Riccardo Spagni
6ef07b10b9
Merge pull request #4520
2e2daebc ANSI colors in Windows 10 (iDunk5400)
2018-10-20 20:34:47 +02:00
moneromooo-monero
d3cda5ad39
console_handler: add a global log when exiting via EOF
It's a common confusion point for users which run monerod
without stdin and with --detach
2018-10-20 09:13:55 +00:00
TheCharlatan
8f96c718bc Adapt Readme and script to monero gitian build signing
The sigs should be produced in a seperate step by default.
Remove windows and osx sig options that are not needed for monero.
2018-10-18 16:39:35 +02:00
TheCharlatan
109717a5fd Remove Travis check in depends toolchain file
The architecture for darwin is now detected correctly, remove the
override for it.
2018-10-18 11:54:20 +02:00
Riccardo Spagni
5ccd3d32b4
Merge pull request #4489
00901e9c epee: initialize a few data members where it seems to be appropriate (moneromooo-monero)
144a6c32 abstract_tcp_server2: move m_period to subclass (moneromooo-monero)
758d7684 connection_basic: remove unused floating time start time (moneromooo-monero)
e5108a29 Catch more exceptions in dtors (moneromooo-monero)
2018-10-15 13:37:18 +02:00
Riccardo Spagni
7c6a7c1945
Merge pull request #4565
bf842a6a build: use ARCH 'native' by default, allow to configure and override it (xiphon)
2018-10-15 13:31:57 +02:00
xiphon
bf842a6a1e build: use ARCH 'native' by default, allow to configure and override it 2018-10-13 09:46:37 +00:00
moneromooo-monero
8f3c793749
readline_buffer: fix "cursor in prompt" bug
It happens when readline displays a prompt just before switching
to a shorter one
2018-10-12 21:03:59 +00:00
moneromooo-monero
e736964a0c
Remove epee header dependency on cryptonote_core 2018-10-12 17:16:44 +00:00
TheCharlatan
9617fad070 Add OSX gitian descriptor 2018-10-11 01:39:44 +02:00
TheCharlatan
d147d24058 Add windows descriptor to gitian descriptors
Windows is built with a seperate descriptor to handle additional changes
that need to be done to the end binary. Consolidate the gitian-build
script for this change.
2018-10-09 22:24:49 +02:00
TheCharlatan
fed4e59886 Change gitian.sigs repo from bitcoin-core to monero-project remote host 2018-10-09 11:12:32 +02:00
TheCharlatan
f2127f9dca Add checksums for download tools
The signature prepare tool and the gitian-builder git repo should be
checked for their content. For this purpose, checkout the gitian-builder
repo at a specific commit and take the sha256sum of the osslsigncode
tool.
2018-10-08 23:14:46 +02:00
TheCharlatan
c2f178902a Add gitian build script
This adds a build script to run gitian builds for linux.
The build script was copied from bitcoin and then adapted for monero.
Build step documentation is outlined in the README in the contrib/gitian
directory.
2018-10-08 17:29:40 +02:00
TheCharlatan
6d0ca4e25e Prepare Depends Packages for Gitian Scripts
The gitian environment does not treat whitespaces in configure lines,
like most other systems. The solution is to just remove them.
2018-10-08 15:53:22 +02:00
iDunk5400
2e2daebcc9
ANSI colors in Windows 10 2018-10-08 14:56:16 +02:00
iDunk5400
17701864c4
Depends: build hidapi with -fPIC 2018-10-08 12:50:04 +02:00
TheCharlatan
21a624af23 Consolidate HID depends makefiles into single recipe
Make sure all required dependencies are linked statically, by only
providing the static libraries.
2018-10-07 19:16:22 +02:00
Riccardo Spagni
3a4fbdd9ec
Merge pull request #4470
2fbf38ee Fix 32bit depends builds (TheCharlatan)
17142ec9 malloc scratchpad for all supported android archs (m2049r)
6a781408 Make depends use self built clang for darwin (TheCharlatan)
69da14e1 fixes make debug compilation on OSX (Dusan Klinec)
fe125647 Fixup RENAME_DB() macro (Howard Chu)
b2972927 osx compilation fix: missing boost libs added (Dusan Klinec)
174f31bf simplewallet: don't complain about payment id on pool mined blocks (moneromooo-monero)
89288863 README: mention ASAN usage alongside valgrind (moneromooo-monero)
83debef9 wallet_rpc_server: remove verbose field in incoming_transfers query (moneromooo-monero)
a69271fa Fixed a typo (Piotr Kąkol)
92d1da28 unit_tests: fix build with GCC 5.4.0 on ubuntu (moneromooo-monero)
a21da905 Wallet: use unique_ptr for WalletImpl members (oneiric)
7a056f44 WalletAPI: multisigSignData bug fixed (naughtyfox)
43a06350 ringdb: use cursors to be a bit faster (moneromooo-monero)
7964d4f8 wallet2: handle corner case in picking fake outputs (moneromooo-monero)
6f5360b3 bump version to 0.13.0.1 (Riccardo Spagni)
cf470bf3 switch from master to rc (Riccardo Spagni)
2018-10-02 22:37:18 +02:00
moneromooo-monero
00901e9c93
epee: initialize a few data members where it seems to be appropriate 2018-10-02 17:28:50 +00:00
moneromooo-monero
144a6c32c9
abstract_tcp_server2: move m_period to subclass
This is where it is actually used, and initialized
2018-10-02 17:28:48 +00:00
moneromooo-monero
758d768486
connection_basic: remove unused floating time start time 2018-10-02 17:28:46 +00:00