From 5c4fe3d4a5973217f866568907af6ae3a9d2c5eb Mon Sep 17 00:00:00 2001 From: sanecito Date: Thu, 4 Oct 2018 01:43:16 -0700 Subject: [PATCH] Create Japanese file, add translations for "Monero::AddressBookImpl" and "Wallet" Contexts --- translations/monero_ja.ts | 4066 +++++++++++++++++++++++++++++++++++++ 1 file changed, 4066 insertions(+) create mode 100644 translations/monero_ja.ts diff --git a/translations/monero_ja.ts b/translations/monero_ja.ts new file mode 100644 index 000000000..ac5065d7d --- /dev/null +++ b/translations/monero_ja.ts @@ -0,0 +1,4066 @@ + + + + + Monero::AddressBookImpl + + + Invalid destination address + 不正な宛先アドレス + + + + Invalid payment ID. Short payment ID should only be used in an integrated address + 不正なペイメントIDありっます。インテグレーテットアドレスにだけ短いペイメントIDを使えます + + + + Invalid payment ID + 不正なペイメントID + + + + Integrated address and long payment ID can't be used at the same time + 同じ時にインテグレーテットアドレスと長いペイメントIDを使えません + + + + Monero::PendingTransactionImpl + + + Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File: + + + + + Failed to write transaction(s) to file + + + + + daemon is busy. Please try again later. + + + + + no connection to daemon. Please make sure daemon is running. + + + + + transaction %s was rejected by daemon with status: + + + + + . Reason: + + + + + Unknown exception: + + + + + Unhandled exception + + + + + Monero::UnsignedTransactionImpl + + + This is a watch only wallet + + + + + + Failed to sign transaction + + + + + Claimed change does not go to a paid address + + + + + Claimed change is larger than payment to the change address + + + + + Change goes to more than one address + + + + + sending %s to %s + + + + + with no destinations + + + + + %s change to %s + + + + + no change + + + + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s + + + + + Monero::WalletImpl + + + payment id has invalid format, expected 16 or 64 character hex string: + + + + + Failed to add short payment id: + + + + + + daemon is busy. Please try again later. + + + + + + no connection to daemon. Please make sure daemon is running. + + + + + + RPC error: + + + + + + not enough outputs for specified ring size + + + + + + found outputs to use + + + + + Please sweep unmixable outputs. + + + + + failed to get random outputs to mix + + + + + + not enough money to transfer, available only %s, sent amount %s + + + + + failed to parse address + + + + + failed to parse secret spend key + + + + + No view key supplied, cancelled + + + + + failed to parse secret view key + + + + + failed to verify secret spend key + + + + + spend key does not match address + + + + + failed to verify secret view key + + + + + view key does not match address + + + + + failed to generate new wallet: + + + + + Failed to send import wallet request + + + + + Failed to load unsigned transactions + + + + + Failed to load transaction from file + + + + + Wallet is view only + + + + + failed to save file + + + + + Key images can only be imported with a trusted daemon + + + + + Failed to import key images: + + + + + Failed to get subaddress label: + + + + + Failed to set subaddress label: + + + + + failed to get random outputs to mix: %s + + + + + + not enough money to transfer, overall balance only %s, sent amount %s + + + + + + not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) + + + + + + output amount + + + + + + transaction was not constructed + + + + + + transaction %s was rejected by daemon with status: + + + + + + one of destinations is zero + + + + + + failed to find a suitable way to split transactions + + + + + + unknown transfer error: + + + + + + internal error: + + + + + + unexpected error: + + + + + + unknown error + + + + + + + + + + Failed to parse txid + + + + + no tx keys found for this txid + + + + + + Failed to parse tx key + + + + + + + + Failed to parse address + + + + + Address must not be a subaddress + + + + + Rescan spent can only be used with a trusted daemon + + + + + Wallet + + + Failed to parse address + + + + + Failed to parse key + + + + + failed to verify key + + + + + key does not match address + + + + + command_line + + + yes + + + + + no + + + + + cryptonote::rpc_args + + + Specify IP to bind RPC server + + + + + Specify username[:password] required for RPC server + + + + + Confirm rpc-bind-ip value is NOT a loopback (local) IP + + + + + Specify a comma separated list of origins to allow cross origin resource sharing + + + + + Invalid IP address given for -- + + + + + permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- + + + + + Username specified with -- + + + + + + cannot be empty + + + + + requires RPC server password -- + + + + + cryptonote::simple_wallet + + + Commands: + + + + + failed to read wallet password + + + + + invalid password + + + + + set seed: needs an argument. available options: language + + + + + set: unrecognized argument(s) + + + + + wallet file path not valid: + + + + + Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. + + + + + usage: payment_id + + + + + needs an argument + + + + + + + + + + + + + + 0 or 1 + + + + + 0, 1, 2, 3, or 4 + + + + + + unsigned integer + + + + + NOTE: the following 25 words can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. + + + + + + --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file + + + + + specify a recovery parameter with the --electrum-seed="words list here" + + + + + specify a wallet path with --generate-new-wallet (not --wallet-file) + + + + + wallet failed to connect to daemon: + + + + + Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. + + + + + List of available languages for your wallet's seed: + + + + + Enter the number corresponding to the language of your choice: + + + + + You had been using a deprecated version of the wallet. Please use the new seed that we provide. + + + + + + + Generated new wallet: + + + + + + + failed to generate new wallet: + + + + + Opened watch-only wallet + + + + + Opened wallet + + + + + You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. + + + + + + You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. + + + + + + failed to load wallet: + + + + + Use the "help" command to see the list of available commands. + + + + + + Wallet data saved + + + + + Mining started in daemon + + + + + mining has NOT been started: + + + + + Mining stopped in daemon + + + + + mining has NOT been stopped: + + + + + Blockchain saved + + + + + + + Height + + + + + transaction + + + + + spent + + + + + unsupported transaction format + + + + + Starting refresh... + + + + + Refresh done, blocks received: + + + + + + payment id has invalid format, expected 16 or 64 character hex string: + + + + + bad locked_blocks parameter: + + + + + + + a single transaction cannot use more than one payment id: + + + + + + + + failed to set up payment id, though it was decoded correctly + + + + + + + + + + + + transaction cancelled. + + + + + + Is this okay anyway? (Y/Yes/N/No): + + + + + There is currently a %u block backlog at that fee level. Is this okay? (Y/Yes/N/No): + + + + + Failed to check for backlog: + + + + + + +Transaction + + + + + + Spending from address index %d + + + + + + + WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. + + + + + + Sending %s. + + + + + Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s + + + + + The transaction fee is %s + + + + + , of which %s is dust from change + + + + + . + + + + + A total of %s from dust change will be sent to dust address + + + + + . +This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) + + + + + + + + + + + + Failed to write transaction(s) to file + + + + + + + + + + + + Unsigned transaction(s) successfully written to file: + + + + + No unmixable outputs found + + + + + No address given + + + + + failed to parse Payment ID + + + + + usage: sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + failed to parse key image + + + + + No outputs found + + + + + Multiple transactions are created, which is not supposed to happen + + + + + The transaction uses multiple or no inputs, which is not supposed to happen + + + + + missing threshold amount + + + + + invalid amount threshold + + + + + donations are not enabled on the testnet + + + + + usage: donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + Claimed change does not go to a paid address + + + + + Claimed change is larger than payment to the change address + + + + + sending %s to %s + + + + + dummy output(s) + + + + + with no destinations + + + + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? (Y/Yes/N/No): + + + + + This is a multisig wallet, it can only sign with sign_multisig + + + + + usage: sign_transfer [export] + + + + + Failed to sign transaction + + + + + Failed to sign transaction: + + + + + Transaction raw hex data exported to + + + + + Failed to load transaction from file + + + + + + RPC error: + + + + + wallet is watch-only and has no spend key + + + + + + + Your original password was incorrect. + + + + + Error with wallet rewrite: + + + + + priority must be 0, 1, 2, 3, or 4 + + + + + + priority must be 0, 1, 2, 3, or 4 + + + + + invalid unit + + + + + + invalid count: must be an unsigned integer + + + + + invalid value + + + + + usage: set_log <log_level_number_0-4> | <categories> + + + + + (Y/Yes/N/No): + + + + + + bad m_restore_height parameter: + + + + + date format must be YYYY-MM-DD + + + + + Restore height is: + + + + + + Is this okay? (Y/Yes/N/No): + + + + + Daemon is local, assuming trusted + + + + + Password for new watch-only wallet + + + + + invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to + + + + + internal error: + + + + + + + unexpected error: + + + + + + + + + + + + + unknown error + + + + + refresh failed: + + + + + Blocks received: + + + + + unlocked balance: + + + + + + + amount + + + + + false + + + + + Unknown command: + + + + + Command usage: + + + + + Command description: + + + + + wallet is multisig but not yet finalized + + + + + Enter optional seed encryption passphrase, empty to see raw seed + + + + + Failed to retrieve seed + + + + + wallet is multisig and has no seed + + + + + Cannot connect to daemon + + + + + Current fee is %s monero per kB + + + + + Error: failed to estimate backlog array size: + + + + + Error: bad estimated backlog array size + + + + + (current) + + + + + %u block (%u minutes) backlog at priority %u%s + + + + + %u to %u block (%u to %u minutes) backlog at priority %u + + + + + No backlog at priority + + + + + + This wallet is already multisig + + + + + + wallet is watch-only and cannot be made multisig + + + + + + This wallet has been used before, please use a new wallet to create a multisig wallet + + + + + Your password is incorrect. + + + + + Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info + + + + + This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants + + + + + usage: make_multisig <threshold> <multisiginfo1> [<multisiginfo2>...] + + + + + Invalid threshold + + + + + Another step is needed + + + + + Send this multisig info to all other participants, then use finalize_multisig <info1> [<info2>...] with others' multisig info + + + + + Error creating multisig: + + + + + Error creating multisig: new wallet is not multisig + + + + + multisig address: + + + + + + + This wallet is not multisig + + + + + This wallet is already finalized + + + + + usage: finalize_multisig <multisiginfo1> [<multisiginfo2>...] + + + + + Failed to finalize multisig + + + + + Failed to finalize multisig: + + + + + + + + + This multisig wallet is not yet finalized + + + + + usage: export_multisig_info <filename> + + + + + Error exporting multisig info: + + + + + Multisig info exported to + + + + + usage: import_multisig_info <filename1> [<filename2>...] - one for each other participant + + + + + Multisig info imported + + + + + Failed to import multisig info: + + + + + Failed to update spent status after importing multisig info: + + + + + Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" + + + + + + + This is not a multisig wallet + + + + + usage: sign_multisig <filename> + + + + + Failed to sign multisig transaction + + + + + Multisig error: + + + + + Failed to sign multisig transaction: + + + + + It may be relayed to the network with submit_multisig + + + + + usage: submit_multisig <filename> + + + + + + Failed to load multisig transaction from file + + + + + + Multisig transaction signed by only %u signers, needs %u more signatures + + + + + + Transaction successfully submitted, transaction + + + + + + You can check its status by using the `show_transfers` command. + + + + + usage: export_raw_multisig <filename> + + + + + Failed to export multisig transaction to file + + + + + Saved exported multisig transaction file(s): + + + + + + + ring size must be an integer >= + + + + + could not change default ring size + + + + + Invalid height + + + + + start_mining [<number_of_threads>] [bg_mining] [ignore_battery] + + + + + Start mining in the daemon (bg_mining and ignore_battery are optional booleans). + + + + + Stop mining in the daemon. + + + + + set_daemon <host>[:<port>] + + + + + Set another daemon to connect to. + + + + + Save the current blockchain data. + + + + + Synchronize the transactions and balance. + + + + + balance [detail] + + + + + Show the wallet's balance of the currently selected account. + + + + + incoming_transfers [available|unavailable] [verbose] [index=<N1>[,<N2>[,...]]] + + + + + Show the incoming transfers, all or filtered by availability and address index. + + + + + payments <PID_1> [<PID_2> ... <PID_N>] + + + + + Show the payments for the given payment IDs. + + + + + Show the blockchain height. + + + + + transfer_original [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address> using an older transaction building algorithm. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + locked_transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <addr> <amount> <lockblocks> [<payment_id>] + + + + + Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + Send all unmixable outputs to yourself with ring_size 1 + + + + + sweep_all [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. + + + + + sweep_below <amount_threshold> [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked outputs below the threshold to an address. + + + + + sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + Send a single output of the given key image to an address without change. + + + + + donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + Donate <amount> to the development team (donate.getmonero.org). + + + + + sign_transfer <file> + + + + + Sign a transaction from a <file>. + + + + + Submit a signed transaction from a file. + + + + + set_log <level>|{+,-,}<categories> + + + + + Change the current log detail (level must be <0-4>). + + + + + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + If no arguments are specified, the wallet shows all the existing accounts along with their balances. +If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). +If the "switch" argument is specified, the wallet switches to the account specified by <index>. +If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. +If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... +If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. +If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. + + + + + address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed>] + + + + + If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the wallet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. + + + + + integrated_address [<payment_id> | <address>] + + + + + Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID + + + + + address_book [(add ((<address> [pid <id>])|<integrated address>) [<description possibly with whitespaces>])|(delete <index>)] + + + + + Print all entries in the address book, optionally adding/deleting an entry to/from it. + + + + + Save the wallet data. + + + + + Save a watch-only keys file. + + + + + Display the private view key. + + + + + Display the private spend key. + + + + + Display the Electrum-style mnemonic seed + + + + + set <option> [<value>] + + + + + Available options: + seed language + Set the wallet's seed language. + always-confirm-transfers <1|0> + Whether to confirm unsplit txes. + print-ring-members <1|0> + Whether to print detailed information about ring members during confirmation. + store-tx-info <1|0> + Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. + default-ring-size <n> + Set the default ring size (default and minimum is 5). + auto-refresh <1|0> + Whether to automatically synchronize new blocks from the daemon. + refresh-type <full|optimize-coinbase|no-coinbase|default> + Set the wallet's refresh behaviour. + priority [0|1|2|3|4] + Set the fee to default/unimportant/normal/elevated/priority. + confirm-missing-payment-id <1|0> + ask-password <1|0> + unit <monero|millinero|micronero|nanonero|piconero> + Set the default monero (sub-)unit. + min-outputs-count [n] + Try to keep at least that many outputs of value at least min-outputs-value. + min-outputs-value [n] + Try to keep at least min-outputs-count outputs of at least that value. + merge-destinations <1|0> + Whether to merge multiple payments to the same destination address. + confirm-backlog <1|0> + Whether to warn if there is transaction backlog. + confirm-backlog-threshold [n] + Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. + refresh-from-block-height [n] + Set the height before which to ignore blocks. + auto-low-priority <1|0> + Whether to automatically use the low priority fee level when it's safe to do so. + + + + + Display the encrypted Electrum-style mnemonic seed. + + + + + Rescan the blockchain for spent outputs. + + + + + get_tx_key <txid> + + + + + Get the transaction key (r) for a given <txid>. + + + + + check_tx_key <txid> <txkey> <address> + + + + + Check the amount going to <address> in <txid>. + + + + + get_tx_proof <txid> <address> [<message>] + + + + + Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. + + + + + check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. + + + + + get_spend_proof <txid> [<message>] + + + + + Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. + + + + + check_spend_proof <txid> <signature_file> [<message>] + + + + + Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. + + + + + get_reserve_proof (all|<amount>) [<message>] + + + + + Generate a signature proving that you own at least this much, optionally with a challenge string <message>. +If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. +Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. + + + + + check_reserve_proof <address> <signature_file> [<message>] + + + + + Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. + + + + + show_transfers [in|out|pending|failed|pool] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + Show the incoming/outgoing transfers within an optional height range. + + + + + unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + Show the unspent outputs of a specified address within an optional amount range. + + + + + Rescan the blockchain from scratch. + + + + + set_tx_note <txid> [free text note] + + + + + Set an arbitrary string note for a <txid>. + + + + + get_tx_note <txid> + + + + + Get a string note for a txid. + + + + + set_description [free text note] + + + + + Set an arbitrary description for the wallet. + + + + + Get the description of the wallet. + + + + + Show the wallet's status. + + + + + Show the wallet's information. + + + + + sign <file> + + + + + Sign the contents of a file. + + + + + verify <filename> <address> <signature> + + + + + Verify a signature on the contents of a file. + + + + + export_key_images <file> + + + + + Export a signed set of key images to a <file>. + + + + + import_key_images <file> + + + + + Import a signed key images list and verify their spent status. + + + + + export_outputs <file> + + + + + Export a set of outputs owned by this wallet. + + + + + import_outputs <file> + + + + + Import a set of outputs owned by this wallet. + + + + + show_transfer <txid> + + + + + Show information about a transfer to/from this address. + + + + + Change the wallet's password. + + + + + Generate a new random full size payment id. These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. + + + + + Print the information about the current fee and transaction backlog. + + + + + Export data needed to create a multisig wallet + + + + + make_multisig <threshold> <string1> [<string>...] + + + + + Turn this wallet into a multisig wallet + + + + + finalize_multisig <string> [<string>...] + + + + + Turn this wallet into a multisig wallet, extra step for N-1/N wallets + + + + + export_multisig_info <filename> + + + + + Export multisig info for other participants + + + + + import_multisig_info <filename> [<filename>...] + + + + + Import multisig info from other participants + + + + + sign_multisig <filename> + + + + + Sign a multisig transaction from a file + + + + + submit_multisig <filename> + + + + + Submit a signed multisig transaction from a file + + + + + export_raw_multisig_tx <filename> + + + + + Export a signed multisig transaction to a file + + + + + help [<command>] + + + + + Show the help section or the documentation about a <command>. + + + + + integer >= + + + + + block height + + + + + No wallet found with that name. Confirm creation of new wallet named: + + + + + can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name" and --generate-from-json="jsonfilename" + + + + + can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic + + + + + --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file + + + + + specify a recovery parameter with the --electrum-seed="multisig seed here" + + + + + Multisig seed failed verification + + + + + Enter seed encryption passphrase, empty if none + + + + + + This address is a subaddress which cannot be used here. + + + + + Error: expected M/N, but got: + + + + + Error: expected N > 1 and N <= M, but got: + + + + + Error: M/N is currently unsupported. + + + + + Generating master wallet from %u of %u multisig wallet keys + + + + + failed to parse secret view key + + + + + failed to verify secret view key + + + + + Secret spend key (%u of %u): + + + + + Error: M/N is currently unsupported + + + + + Restore height + + + + + Still apply restore height? (Y/Yes/N/No): + + + + + Warning: using an untrusted daemon at %s, privacy will be lessened + + + + + Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. + + + + + Your wallet has been generated! +To start synchronizing with the daemon, use the "refresh" command. +Use the "help" command to see the list of available commands. +Use "help <command>" to see a command's documentation. +Always use the "exit" command when closing monero-wallet-cli to save +your current session's state. Otherwise, you might need to synchronize +your wallet again (your wallet keys are NOT at risk in any case). + + + + + + failed to generate new mutlisig wallet + + + + + Generated new %u/%u multisig wallet: + + + + + Opened %u/%u multisig wallet%s + + + + + Use "help <command>" to see a command's documentation. + + + + + + wallet is multisig and cannot save a watch-only version + + + + + missing daemon URL argument + + + + + Unexpected array length - Exited simple_wallet::set_daemon() + + + + + This does not seem to be a valid daemon URL. + + + + + + txid + + + + + + idx + + + + + (Some owned outputs have partial key images - import_multisig_info needed) + + + + + Currently selected account: [ + + + + + ] + + + + + Tag: + + + + + (No tag assigned) + + + + + Balance per address: + + + + + Address + + + + + + Balance + + + + + + Unlocked balance + + + + + Outputs + + + + + + Label + + + + + %8u %6s %21s %21s %7u %21s + + + + + usage: balance [detail] + + + + + + usage: incoming_transfers [available|unavailable] [verbose] [index=<N>] + + + + + spent + + + + + global index + + + + + tx id + + + + + + addr index + + + + + No incoming transfers + + + + + No incoming available transfers + + + + + No incoming unavailable transfers + + + + + expected at least one payment ID + + + + + payment + + + + + transaction + + + + + height + + + + + unlock time + + + + + No payments with id + + + + + + + failed to get blockchain height: + + + + + + + + + failed to connect to the daemon + + + + + +Transaction %llu/%llu: txid=%s + + + + + +Input %llu/%llu: amount=%s + + + + + failed to get output: + + + + + output key's originating block height shouldn't be higher than the blockchain height + + + + + +Originating block heights: + + + + + +| + + + + + + | + + + + + + +Warning: Some input keys being spent are from + + + + + , which can break the anonymity of ring signature. Make sure this is intentional! + + + + + + Ring size must not be 0 + + + + + + ring size %u is too small, minimum is %u + + + + + wrong number of arguments + + + + + + + No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): + + + + + + No outputs found, or daemon is not ready + + + + + Transaction successfully saved to + + + + + + , txid + + + + + Failed to save transaction to + + + + + + Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): + + + + + + + Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): + + + + + Donating + + + + + This is a watch only wallet + + + + + usage: show_transfer <txid> + + + + + Double spend seen on the network: this transaction may or may not end up being mined + + + + + Transaction ID not found + + + + + true + + + + + failed to parse refresh type + + + + + + wallet is watch-only and has no seed + + + + + + wallet is non-deterministic and has no seed + + + + + + wallet is watch-only and cannot transfer + + + + + could not change default priority + + + + + full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) + + + + + monero, millinero, micronero, nanonero, piconero + + + + + Wallet name not valid. Please try again or use Ctrl-C to quit. + + + + + Wallet and key files found, loading... + + + + + Key file found but not wallet file. Regenerating... + + + + + Key file not found. Failed to open wallet: + + + + + Generating new wallet... + + + + + Electrum-style word list failed verification + + + + + + + + + + + + + + No data supplied, cancelled + + + + + + + + + + + + + + + + failed to parse address + + + + + + failed to parse view key secret key + + + + + + failed to verify view key secret key + + + + + + + view key does not match standard address + + + + + + + + + account creation failed + + + + + + + failed to parse spend key secret key + + + + + + failed to verify spend key secret key + + + + + + spend key does not match standard address + + + + + failed to open account + + + + + + + + + wallet is null + + + + + + invalid language choice entered. Please try again. + + + + + + View key: + + + + + You may want to remove the file "%s" and try again + + + + + failed to deinitialize wallet + + + + + + + this command requires a trusted daemon. Enable with --trusted-daemon + + + + + blockchain can't be saved: + + + + + + daemon is busy. Please try again later. + + + + + + no connection to daemon. Please make sure daemon is running. + + + + + refresh error: + + + + + Balance: + + + + + pubkey + + + + + key image + + + + + + unlocked + + + + + ringct + + + + + T + + + + + F + + + + + locked + + + + + RingCT + + + + + - + + + + + payment ID has invalid format, expected 16 or 64 character hex string: + + + + + failed to get spent status + + + + + the same transaction + + + + + blocks that are temporally very close + + + + + Locked blocks too high, max 1000000 (˜4 yrs) + + + + + + Good signature + + + + + + + Bad signature + + + + + usage: integrated_address [payment ID] + + + + + Standard address: + + + + + failed to parse payment ID or address + + + + + usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] + + + + + failed to parse payment ID + + + + + failed to parse index + + + + + Address book is empty. + + + + + Index: + + + + + + Address: + + + + + Payment ID: + + + + + + Description: + + + + + usage: set_tx_note [txid] free text note + + + + + usage: get_tx_note [txid] + + + + + usage: sign <filename> + + + + + wallet is watch-only and cannot sign + + + + + + + + failed to read file + + + + + usage: check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + + + failed to load signature file + + + + + usage: get_spend_proof <txid> [<message>] + + + + + wallet is watch-only and cannot generate the proof + + + + + usage: check_spend_proof <txid> <signature_file> [<message>] + + + + + usage: get_reserve_proof (all|<amount>) [<message>] + + + + + The reserve proof can be generated only by a full wallet + + + + + usage: check_reserve_proof <address> <signature_file> [<message>] + + + + + Address must not be a subaddress + + + + + Good signature -- total: %s, spent: %s, unspent: %s + + + + + usage: show_transfers [in|out|all|pending|failed] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + [Double spend seen on the network: this transaction may or may not end up being mined] + + + + + usage: unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + There is no unspent output in the specified address + + + + + (no daemon) + + + + + (out of sync) + + + + + (Untitled account) + + + + + + + + + + failed to parse index: + + + + + + specify an index between 0 and + + + + + usage: + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + +Grand total: + Balance: + + + + + , unlocked balance: + + + + + Untagged accounts: + + + + + Tag %s is unregistered. + + + + + Accounts with tag: + + + + + Tag's description: + + + + + Account + + + + + %c%8u %6s %21s %21s %21s + + + + + ---------------------------------------------------------------------------------- + + + + + %15s %21s %21s + + + + + Primary address + + + + + (used) + + + + + (Untitled address) + + + + + <index_min> is already out of bound + + + + + <index_max> exceeds the bound + + + + + usage: address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed> ] + + + + + + Integrated addresses can only be created for account 0 + + + + + Integrated address: %s, payment ID: %s + + + + + Subaddress: + + + + + usage: get_description + + + + + no description found + + + + + description found: + + + + + Filename: + + + + + Watch only + + + + + %u/%u multisig%s + + + + + Normal + + + + + Type: + + + + + Testnet: + + + + + Yes + + + + + No + + + + + This wallet is multisig and cannot sign + + + + + usage: verify <filename> <address> <signature> + + + + + Bad signature from + + + + + Good signature from + + + + + usage: export_key_images <filename> + + + + + wallet is watch-only and cannot export key images + + + + + + + failed to save file + + + + + Signed key images exported to + + + + + usage: import_key_images <filename> + + + + + usage: export_outputs <filename> + + + + + Outputs exported to + + + + + usage: import_outputs <filename> + + + + + + + + amount is wrong: + + + + + expected number from 0 to + + + + + Sweeping + + + + + Money successfully sent, transaction: + + + + + Change goes to more than one address + + + + + %s change to %s + + + + + no change + + + + + + + Transaction successfully signed to file + + + + + usage: get_tx_key <txid> + + + + + + + + + + + + + failed to parse txid + + + + + Tx key: + + + + + no tx keys found for this txid + + + + + usage: get_tx_proof <txid> <address> [<message>] + + + + + + + signature file saved to: + + + + + + + failed to save signature file + + + + + usage: check_tx_key <txid> <txkey> <address> + + + + + + failed to parse tx key + + + + + + + error: + + + + + + received + + + + + + in txid + + + + + + received nothing in txid + + + + + + WARNING: this transaction is not yet included in the blockchain! + + + + + + This transaction has %u confirmations + + + + + + WARNING: failed to determine number of confirmations! + + + + + bad min_height parameter: + + + + + bad max_height parameter: + + + + + in + + + + + + out + + + + + failed + + + + + pending + + + + + <min_amount> should be smaller than <max_amount> + + + + + +Amount: + + + + + , number of keys: + + + + + + + + + + +Min block height: + + + + + +Max block height: + + + + + +Min amount found: + + + + + +Max amount found: + + + + + +Total count: + + + + + +Bin size: + + + + + +Outputs per *: + + + + + count + ^ + + + + + + | + + + + + + + + + + + +--> block height + + + + + + ^ + + + + + ^ + + + + + + + + + + + wallet + + + + + + Random payment ID: + + + + + Matching integrated address: + + + + + genms + + + Base filename (-1, -2, etc suffixes will be appended as needed) + + + + + Give threshold and participants at once as M/N + + + + + How many participants will share parts of the multisig wallet + + + + + How many signers are required to sign a valid transaction + + + + + Create testnet multisig wallets + + + + + Generating %u %u/%u multisig wallets + + + + + Error verifying multisig extra info + + + + + Error finalizing multisig + + + + + Generated multisig wallets for address + + + + + Error creating multisig wallets: + + + + + This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other + + + + + Error: expected N/M, but got: + + + + + + Error: either --scheme or both of --threshold and --participants may be given + + + + + Error: expected N > 1 and N <= M, but got N==%u and M==%d + + + + + Error: --filename-base is required + + + + + Error: unsupported scheme: only N/N and N-1/N are supported + + + + + sw + + + Generate new wallet and save it to <arg> + + + + + Generate incoming-only wallet from view key + + + + + Generate deterministic wallet from spend key + + + + + Generate wallet from private keys + + + + + Generate a master wallet from multisig wallet keys + + + + + Language for mnemonic + + + + + Specify Electrum seed for wallet recovery/creation + + + + + Recover wallet using Electrum-style mnemonic seed + + + + + Recover multisig wallet using Electrum-style mnemonic seed + + + + + Generate non-deterministic view and spend keys + + + + + Enable commands which rely on a trusted daemon + + + + + Allow communicating with a daemon that uses a different RPC version + + + + + Restore from specific blockchain height + + + + + The newly created transaction will not be relayed to the monero network + + + + + daemon is busy. Please try again later. + + + + + possibly lost connection to daemon + + + + + Error: + + + + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + + Failed to initialize wallet + + + + + tools::wallet2 + + + Use daemon instance at <host>:<port> + + + + + Use daemon instance at host <arg> instead of localhost + + + + + Wallet password file + + + + + Use daemon instance at port <arg> instead of 18081 + + + + + For testnet. Daemon must also be launched with --testnet flag + + + + + Restricts to view-only commands + + + + + can't specify daemon host or port more than once + + + + + can't specify more than one of --password and --password-file + + + + + the password file specified could not be read + + + + + Failed to load file + + + + + Wallet password (escape/quote as needed) + + + + + Specify username[:password] for daemon RPC client + + + + + no password specified; use --prompt-for-password to prompt for a password + + + + + Failed to parse JSON + + + + + Version %u too new, we can only grok up to %u + + + + + failed to parse view key secret key + + + + + + + failed to verify view key secret key + + + + + failed to parse spend key secret key + + + + + + + failed to verify spend key secret key + + + + + Electrum-style word list failed verification + + + + + At least one of Electrum-style word list and private view key and private spend key must be specified + + + + + Both Electrum-style word list and private key(s) specified + + + + + invalid address + + + + + view key does not match standard address + + + + + spend key does not match standard address + + + + + Cannot generate deprecated wallets from JSON + + + + + failed to parse address: + + + + + Address must be specified in order to create watch-only wallet + + + + + failed to generate new wallet: + + + + + + + + + + + + Primary account + + + + + No funds received in this tx. + + + + + failed to read file + + + + + tools::wallet_rpc_server + + + Daemon is local, assuming trusted + + + + + Failed to create directory + + + + + Failed to create directory %s: %s + + + + + Cannot specify -- + + + + + and -- + + + + + Failed to create file + + + + + . Check permissions or remove file + + + + + Error writing to file + + + + + RPC username/password is stored in file + + + + + Tag %s is unregistered. + + + + + Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) + + + + + This is the RPC monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + + Can't specify more than one of --wallet-file and --generate-from-json + + + + + Must specify --wallet-file or --generate-from-json or --wallet-dir + + + + + Loading wallet... + + + + + + Saving wallet... + + + + + + Successfully saved + + + + + Successfully loaded + + + + + Wallet initialization failed: + + + + + Failed to initialize wallet RPC server + + + + + Starting wallet RPC server + + + + + Failed to run wallet: + + + + + Stopped wallet RPC server + + + + + Failed to save wallet: + + + + + wallet_args + + + + + Wallet options + + + + + Generate wallet from JSON format file + + + + + Use wallet <arg> + + + + + Max number of threads to use for a parallel job + + + + + Specify log file + + + + + Config file + + + + + General options + + + + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + + Can't find config file + + + + + Logging to: + + + + + Logging to %s + + + + + Usage: + + + +