monero/contrib/epee/include/net/levin_protocol_handler.h

194 lines
6.3 KiB
C
Raw Normal View History

// Copyright (c) 2006-2013, Andrey N. Sabelnikov, www.sabelnikov.net
2014-03-03 17:07:58 -05:00
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
// * Neither the name of the Andrey N. Sabelnikov nor the
// names of its contributors may be used to endorse or promote products
// derived from this software without specific prior written permission.
2014-07-23 09:03:52 -04:00
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER BE LIABLE FOR ANY
// DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2014-07-23 09:03:52 -04:00
//
2014-03-03 17:07:58 -05:00
#ifndef _LEVIN_PROTOCOL_HANDLER_H_
#define _LEVIN_PROTOCOL_HANDLER_H_
#include <boost/uuid/uuid_generators.hpp>
#include "levin_base.h"
#include "int-util.h"
2014-03-03 17:07:58 -05:00
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 11:34:23 -05:00
#undef MONERO_DEFAULT_LOG_CATEGORY
#define MONERO_DEFAULT_LOG_CATEGORY "net"
2014-03-03 17:07:58 -05:00
namespace epee
{
namespace levin
{
template<class t_connection_context = net_utils::connection_context_base>
struct protocl_handler_config
{
levin_commands_handler<t_connection_context>* m_pcommands_handler;
void (*m_pcommands_handler_destroy)(levin_commands_handler<t_connection_context>*);
~protocl_handler_config() { if (m_pcommands_handler && m_pcommands_handler_destroy) (*m_pcommands_handler_destroy)(m_pcommands_handler); }
2014-03-03 17:07:58 -05:00
};
template<class t_connection_context = net_utils::connection_context_base>
class protocol_handler
{
public:
typedef t_connection_context connection_context;
typedef protocl_handler_config<t_connection_context> config_type;
protocol_handler(net_utils::i_service_endpoint* psnd_hndlr, config_type& config, t_connection_context& conn_context);
virtual ~protocol_handler(){}
virtual bool handle_recv(const void* ptr, size_t cb);
bool after_init_connection(){return true;}
private:
enum connection_data_state
{
conn_state_reading_head,
conn_state_reading_body
};
config_type& m_config;
t_connection_context& m_conn_context;
net_utils::i_service_endpoint* m_psnd_hndlr;
std::string m_cach_in_buffer;
connection_data_state m_state;
bucket_head m_current_head;
};
template<class t_connection_context>
protocol_handler<t_connection_context>::protocol_handler(net_utils::i_service_endpoint* psnd_hndlr, config_type& config, t_connection_context& conn_context):
m_config(config),
m_conn_context(conn_context),
m_psnd_hndlr(psnd_hndlr),
m_state(conn_state_reading_head),
m_current_head(bucket_head())
{}
template<class t_connection_context>
bool protocol_handler<t_connection_context>::handle_recv(const void* ptr, size_t cb)
{
if(!m_config.m_pcommands_handler)
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 11:34:23 -05:00
LOG_ERROR_CC(m_conn_context, "Command handler not set!");
2014-03-03 17:07:58 -05:00
return false;
}
m_cach_in_buffer.append((const char*)ptr, cb);
bool is_continue = true;
while(is_continue)
{
switch(m_state)
{
case conn_state_reading_head:
if(m_cach_in_buffer.size() < sizeof(bucket_head))
{
if(m_cach_in_buffer.size() >= sizeof(uint64_t) && *((uint64_t*)m_cach_in_buffer.data()) != SWAP64LE(LEVIN_SIGNATURE))
2014-03-03 17:07:58 -05:00
{
2017-07-05 03:53:16 -04:00
LOG_ERROR_CC(m_conn_context, "Signature mismatch on accepted connection");
2014-03-03 17:07:58 -05:00
return false;
}
is_continue = false;
break;
}
{
#if BYTE_ORDER == LITTLE_ENDIAN
bucket_head &phead = *(bucket_head*)m_cach_in_buffer.data();
#else
bucket_head phead = *(bucket_head*)m_cach_in_buffer.data();
phead.m_signature = SWAP64LE(phead.m_signature);
phead.m_cb = SWAP64LE(phead.m_cb);
phead.m_command = SWAP32LE(phead.m_command);
phead.m_return_code = SWAP32LE(phead.m_return_code);
phead.m_reservedA = SWAP32LE(phead.m_reservedA);
phead.m_reservedB = SWAP32LE(phead.m_reservedB);
#endif
if(LEVIN_SIGNATURE != phead.m_signature)
2014-03-03 17:07:58 -05:00
{
2017-07-05 03:53:16 -04:00
LOG_ERROR_CC(m_conn_context, "Signature mismatch on accepted connection");
2014-03-03 17:07:58 -05:00
return false;
}
m_current_head = phead;
2014-03-03 17:07:58 -05:00
}
m_cach_in_buffer.erase(0, sizeof(bucket_head));
m_state = conn_state_reading_body;
break;
case conn_state_reading_body:
if(m_cach_in_buffer.size() < m_current_head.m_cb)
{
is_continue = false;
break;
}
{
std::string buff_to_invoke;
if(m_cach_in_buffer.size() == m_current_head.m_cb)
buff_to_invoke.swap(m_cach_in_buffer);
else
{
buff_to_invoke.assign(m_cach_in_buffer, 0, (std::string::size_type)m_current_head.m_cb);
m_cach_in_buffer.erase(0, (std::string::size_type)m_current_head.m_cb);
}
if(m_current_head.m_have_to_return_data)
{
std::string return_buff;
m_current_head.m_return_code = m_config.m_pcommands_handler->invoke(m_current_head.m_command, buff_to_invoke, return_buff, m_conn_context);
m_current_head.m_cb = return_buff.size();
m_current_head.m_have_to_return_data = 0;
2014-03-03 17:07:58 -05:00
return_buff.insert(0, (const char*)&m_current_head, sizeof(m_current_head));
if(!m_psnd_hndlr->do_send(byte_slice{std::move(return_buff)}))
2014-03-03 17:07:58 -05:00
return false;
}
else
m_config.m_pcommands_handler->notify(m_current_head.m_command, buff_to_invoke, m_conn_context);
}
m_state = conn_state_reading_head;
break;
default:
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 11:34:23 -05:00
LOG_ERROR_CC(m_conn_context, "Undefined state in levin_server_impl::connection_handler, m_state=" << m_state);
2014-03-03 17:07:58 -05:00
return false;
}
}
return true;
}
}
}
#endif //_LEVIN_PROTOCOL_HANDLER_H_