Fix various typos (#8748)

This commit is contained in:
luzpaz 2023-01-29 09:38:44 -05:00 committed by GitHub
parent 8846880015
commit 880cc230ac
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
25 changed files with 43 additions and 43 deletions

View File

@ -897,7 +897,7 @@
- Compare window title to entry URLs #556
- Implemented inline error messages #162
- Ignore group expansion and other minor changes when making database "dirty" #464
- Updated license and copyright information on souce files #632
- Updated license and copyright information on source files #632
- Added contributors list to about dialog #629
## 2.1.4 (2017-04-09)

View File

@ -1,5 +1,5 @@
# Running macdeployqt on a POST_BUILD copied binaries is pointless when using CPack because
# the copied binaries will be overriden by the corresponding install(TARGETS) commands.
# the copied binaries will be overridden by the corresponding install(TARGETS) commands.
# That's why we run macdeployqt using install(CODE) on the already installed binaries.
# The precondition is that all install(TARGETS) calls have to be called before this function is
# called.

View File

@ -941,7 +941,7 @@
<li>Compare window title to entry URLs [#556]</li>
<li>Implemented inline error messages [#162]</li>
<li>Ignore group expansion and other minor changes when making database "dirty" [#464]</li>
<li>Updated license and copyright information on souce files [#632]</li>
<li>Updated license and copyright information on source files [#632]</li>
<li>Added contributors list to about dialog [#629]</li>
</ul>
</description>

View File

@ -532,5 +532,5 @@ if(WIN32)
endif()
# The install commands in this subdirectory will be executed after all the install commands in the
# current scope are ran. It is required for correct functtioning of macdeployqt.
# current scope are ran. It is required for correct functioning of macdeployqt.
add_subdirectory(post_install)

View File

@ -356,7 +356,7 @@ void AutoType::executeAutoTypeActions(const Entry* entry,
/**
* Single Autotype entry-point function
* Look up the Auto-Type sequence for the given entry then perfom Auto-Type in the active window
* Look up the Auto-Type sequence for the given entry then perform Auto-Type in the active window
*/
void AutoType::performAutoType(const Entry* entry)
{
@ -372,7 +372,7 @@ void AutoType::performAutoType(const Entry* entry)
/**
* Extra Autotype entry-point function
* Perfom Auto-Type of the directly specified sequence in the active window
* Perform Auto-Type of the directly specified sequence in the active window
*/
void AutoType::performAutoTypeWithSequence(const Entry* entry, const QString& sequence)
{

View File

@ -149,7 +149,7 @@ QSharedPointer<Database> DatabaseCreate::initializeDatabaseFromOptions(const QSh
* If a key file is specified but it can't be loaded, the function will
* fail.
*
* If the database is being saved in a non existant directory, the
* If the database is being saved in a non existent directory, the
* function will fail.
*
* @return EXIT_SUCCESS on success, or EXIT_FAILURE on failure

View File

@ -28,7 +28,7 @@
* A password can be specified to encrypt the database.
* If none is specified the function will fail.
*
* If the database is being saved in a non existant directory, the
* If the database is being saved in a non existent directory, the
* function will fail.
*
* @return EXIT_SUCCESS on success, or EXIT_FAILURE on failure

View File

@ -413,7 +413,7 @@ namespace Utils
*
* @param path Path to the key file to be loaded
* @param fileKey Resulting fileKey
* @return true if the key file was loaded succesfully
* @return true if the key file was loaded successfully
*/
bool loadFileKey(const QString& path, QSharedPointer<FileKey>& fileKey)
{

View File

@ -64,7 +64,7 @@ namespace AsyncTask
*
* @param task std::function object to run
* @param context QObject responsible for calling this function
* @param callback std::function object to run after the task completess
* @param callback std::function object to run after the task completes
*/
template <typename FunctionObject, typename FunctionObject2>
void runThenCallback(FunctionObject task, QObject* context, FunctionObject2 callback)

View File

@ -346,7 +346,7 @@ bool Database::performSave(const QString& filePath, SaveAction action, const QSt
tempFile.setAutoRemove(false);
QFile::setPermissions(filePath, perms);
#if QT_VERSION >= QT_VERSION_CHECK(5, 10, 0)
// Retain orginal creation time
// Retain original creation time
tempFile.setFileTime(createTime, QFile::FileBirthTime);
#endif
return true;

View File

@ -43,7 +43,7 @@ public:
KeepLocal, // merge history forcing local as top regardless of age
KeepRemote, // merge history forcing remote as top regardless of age
KeepNewer, // merge history
Synchronize, // merge history keeping most recent as top entry and appling deletions
Synchronize, // merge history keeping most recent as top entry and applying deletions
};
enum CloneFlag

View File

@ -332,7 +332,7 @@ void DatabaseTabWidget::importOpVaultDatabase()
* Attempt to close the current database and remove its tab afterwards.
*
* @param index index of the database tab to close
* @return true if database was closed successully
* @return true if database was closed successfully
*/
bool DatabaseTabWidget::closeCurrentDatabaseTab()
{
@ -343,7 +343,7 @@ bool DatabaseTabWidget::closeCurrentDatabaseTab()
* Attempt to close the database tab that sent the close request.
*
* @param index index of the database tab to close
* @return true if database was closed successully
* @return true if database was closed successfully
*/
bool DatabaseTabWidget::closeDatabaseTabFromSender()
{
@ -354,7 +354,7 @@ bool DatabaseTabWidget::closeDatabaseTabFromSender()
* Attempt to close a database and remove its tab afterwards.
*
* @param index index of the database tab to close
* @return true if database was closed successully
* @return true if database was closed successfully
*/
bool DatabaseTabWidget::closeDatabaseTab(int index)
{
@ -365,7 +365,7 @@ bool DatabaseTabWidget::closeDatabaseTab(int index)
* Attempt to close a database and remove its tab afterwards.
*
* @param dbWidget \link DatabaseWidget to close
* @return true if database was closed successully
* @return true if database was closed successfully
*/
bool DatabaseTabWidget::closeDatabaseTab(DatabaseWidget* dbWidget)
{

View File

@ -745,7 +745,7 @@ void MainWindow::appExit()
/**
* Returns if application was built with hardware key support.
* Intented to be used by 3rd-party applications using DBus.
* Intended to be used by 3rd-party applications using DBus.
*
* @return True if built with hardware key support, false otherwise
*/
@ -761,7 +761,7 @@ bool MainWindow::isHardwareKeySupported()
/**
* Refreshes list of hardware keys known.
* Triggers the DatabaseOpenWidget to automatically select the key last used for a database if found.
* Intented to be used by 3rd-party applications using DBus.
* Intended to be used by 3rd-party applications using DBus.
*
* @return True if any key was found, false otherwise or if application lacks hardware key support
*/

View File

@ -133,7 +133,7 @@ void ReportsWidgetHibp::makeHibpTable()
}
}
// Sort decending by the number the password has been exposed
// Sort descending by the number the password has been exposed
qSort(items.begin(), items.end(), [](QPair<Entry*, int>& lhs, QPair<Entry*, int>& rhs) {
return lhs.second > rhs.second;
});

View File

@ -173,7 +173,7 @@ ShareObserver::Result ShareExport::intoContainer(const QString& resolvedPath,
KeePass2Writer writer;
if (!writer.writeDatabase(&buffer, targetDb.data())) {
qWarning("Serializing export dabase failed: %s.", writer.errorString().toLatin1().data());
qWarning("Serializing export database failed: %s.", writer.errorString().toLatin1().data());
return {reference.path, ShareObserver::Result::Error, writer.errorString()};
}
@ -202,7 +202,7 @@ ShareObserver::Result ShareExport::intoContainer(const QString& resolvedPath,
} else {
QString error;
if (!targetDb->saveAs(resolvedPath, Database::Atomic, {}, &error)) {
qWarning("Exporting dabase failed: %s.", error.toLatin1().data());
qWarning("Exporting database failed: %s.", error.toLatin1().data());
return {resolvedPath, ShareObserver::Result::Error, error};
}
}

View File

@ -107,7 +107,7 @@ namespace
rv = SCardListReaders(context, nullptr, mszReaders, &dwReaders);
if (rv == SCARD_S_SUCCESS) {
char* readhead = mszReaders;
// Names are seperated by a null byte
// Names are separated by a null byte
// The list is terminated by two null bytes
while (*readhead != '\0') {
QString reader = QString::fromUtf8(readhead);
@ -563,7 +563,7 @@ bool YubiKeyInterfacePCSC::findValidKeys()
&dwActiveProtocol);
if (rv == SCARD_S_SUCCESS) {
// Read the potocol and the ATR record
// Read the protocol and the ATR record
char pbReader[MAX_READERNAME] = {0};
SCUINT dwReaderLen = sizeof(pbReader);
SCUINT dwState = 0;
@ -683,7 +683,7 @@ YubiKeyInterfacePCSC::challenge(YubiKeySlot slot, const QByteArray& challenge, B
So we wait for the user to re-present it to clear the time-out
This condition usually only happens when the key times out after
the initial key listing, because performTestChallenge implicitly
resets the key (see commnt above) */
resets the key (see comment above) */
if (ret == YubiKey::ChallengeResult::YCR_SUCCESS) {
emit challengeCompleted();
m_mutex.unlock();
@ -728,7 +728,7 @@ YubiKey::ChallengeResult YubiKeyInterfacePCSC::performChallenge(void* key,
* configurations even work, some docs say avoid it.
*
* In fact, the Yubikey always assumes the last byte (nr. 64)
* and all bytes of the same value preceeding it to be padding.
* and all bytes of the same value preceding it to be padding.
* This does not conform fully to PKCS7, because the the actual value
* of the padding bytes is ignored.
*/

View File

@ -1,5 +1,5 @@
# The install commands in this subdirectory will be executed after all the install commands in the
# current scope are ran. It is required for correct functtioning of macdeployqt.
# current scope are ran. It is required for correct functioning of macdeployqt.
if(APPLE AND WITH_APP_BUNDLE)
# Run macdeloyqt on the main app and any extra binaries and plugins as specified by the

View File

@ -433,7 +433,7 @@ bool SSHAgent::listIdentities(QList<QSharedPointer<OpenSSHKey>>& list)
* Check if this identity is loaded in the SSH Agent.
*
* @param key identity to remove
* @param loaded is the key laoded
* @param loaded is the key loaded
* @return true on success
*/
bool SSHAgent::checkIdentity(const OpenSSHKey& key, bool& loaded)

View File

@ -110,7 +110,7 @@ bool TouchID::storeKey(const QString& databasePath, const QByteArray& passwordKe
SymmetricCipher aes256Encrypt;
if (!aes256Encrypt.init(SymmetricCipher::Aes256_GCM, SymmetricCipher::Encrypt, randomKey, randomIV)) {
debug("TouchID::storeKey - AES initialisation falied");
debug("TouchID::storeKey - AES initialisation failed");
return false;
}

View File

@ -60,7 +60,7 @@
/* Additional entropy to add when password is made of multiple matches. Use different
* amounts depending on whether the match is at the end of the password, or in the
* middle. If the match is at the begining then there is no additional entropy.
* middle. If the match is at the beginning then there is no additional entropy.
*/
#define MULTI_END_ADDITION 1.0
#define MULTI_MID_ADDITION 1.75
@ -169,7 +169,7 @@ static ZxcMatch_t *AllocMatch()
static void AddResult(ZxcMatch_t **HeadRef, ZxcMatch_t *Nu, int MaxLen)
{
/* Adjust the entropy to be used for calculations depending on whether the passed match is
* at the begining, middle or end of the password
* at the beginning, middle or end of the password
*/
if (Nu->Begin)
{
@ -546,7 +546,7 @@ static void AddLeetChr(uint8_t c, int IsLeet, uint8_t *Leeted, uint8_t *UnLeet)
/**********************************************************************************
* Given details of a word match, update it with the entropy (as natural log of
* number of possiblities)
* number of possibilities)
*/
static void DictionaryEntropy(ZxcMatch_t *m, DictMatchInfo_t *Extra, const uint8_t *Pwd)
{
@ -1370,7 +1370,7 @@ static void RepeatMatch(ZxcMatch_t **Result, const uint8_t *Passwd, int Start, i
int Len, i;
uint8_t c;
Passwd += Start;
/* Remember first char and the count its occurances */
/* Remember first char and the count its occurrences */
c = *Passwd;
for(Len = 1; (Len < MaxLen) && (c == Passwd[Len]); ++Len)
{ }
@ -1533,9 +1533,9 @@ static void SequenceMatch(ZxcMatch_t **Result, const uint8_t *Passwd, int Start,
/**********************************************************************************
* Matching a password is treated as a problem of finding the minimum distance
* between two vertexes in a graph. This is solved using Dijkstra's algorithm.
* between two vertices in a graph. This is solved using Dijkstra's algorithm.
*
* There are a series of nodes (or vertexes in graph terminology) which correspond
* There are a series of nodes (or vertices in graph terminology) which correspond
* to points between each character of the password. Also there is a start node
* before the first character and an end node after the last character.
*
@ -1546,7 +1546,7 @@ static void SequenceMatch(ZxcMatch_t **Result, const uint8_t *Passwd, int Start,
* end node.
*
* Dijkstra's algorithm finds the combination of these part matches (or paths)
* which gives the lowest entropy (or smallest distance) from begining to end
* which gives the lowest entropy (or smallest distance) from beginning to end
* of the password.
*/

View File

@ -68,7 +68,7 @@ typedef enum
/* Linked list of information returned in the Info arg to ZxcvbnMatch */
struct ZxcMatch
{
int Begin; /* Char position of begining of match */
int Begin; /* Char position of beginning of match */
int Length; /* Number of chars in the match */
double Entrpy; /* The entropy of the match */
double MltEnpy; /* Entropy with additional allowance for multipart password */
@ -85,13 +85,13 @@ extern "C" {
#ifdef USE_DICT_FILE
/**********************************************************************************
* Read the dictionnary data from the given file. Returns 1 if OK, 0 if error.
* Read the dictionary data from the given file. Returns 1 if OK, 0 if error.
* Called once at program startup.
*/
int ZxcvbnInit(const char *);
/**********************************************************************************
* Free the dictionnary data after use. Called once at program shutdown.
* Free the dictionary data after use. Called once at program shutdown.
*/
void ZxcvbnUnInit();
@ -107,7 +107,7 @@ void ZxcvbnUnInit();
* The main password matching function. May be called multiple times.
* The parameters are:
* Passwd The password to be tested. Null terminated string.
* UserDict User supplied dictionary words to be considered particulary bad. Passed
* UserDict User supplied dictionary words to be considered particularly bad. Passed
* as a pointer to array of string pointers, with null last entry (like
* the argv parameter to main()). May be null or point to empty array when
* there are no user dictionary words.

View File

@ -115,7 +115,7 @@ void TestEntry::testClone()
QScopedPointer<Entry> entryCloneRename(entryOrg->clone(Entry::CloneRenameTitle));
QCOMPARE(entryCloneRename->uuid(), entryOrg->uuid());
QCOMPARE(entryCloneRename->title(), QString("New Title - Clone"));
// Cloning should not modify time info unless explicity requested
// Cloning should not modify time info unless explicitly requested
QCOMPARE(entryCloneRename->timeInfo(), entryOrg->timeInfo());
QScopedPointer<Entry> entryCloneResetTime(entryOrg->clone(Entry::CloneResetTimeInfo));

View File

@ -69,7 +69,7 @@ void TestFdoSecrets::testSpecialCharsInAttributeValue()
e2->setTitle("titleB");
e2->attributes()->set("testAttribute", "Abc:*+.-");
// search for custom entries via programatic API
// search for custom entries via programmatic API
{
const auto term = Collection::attributeToTerm("testAttribute", "OAuth::[test.name@gmail.com]");
const auto res = EntrySearcher().search({term}, root.data());

View File

@ -79,7 +79,7 @@ void TestMerge::testMergeIntoNew()
}
/**
* Merging when no changes occured should not
* Merging when no changes occurred should not
* have any side effect.
*/
void TestMerge::testMergeNoChanges()

View File

@ -418,7 +418,7 @@ void TestGuiFdoSecrets::testServiceSearchBlockingUnlockMultiple()
VERIFY(service);
// when there are multiple locked databases,
// repeatly show the dialog until there is at least one unlocked collection
// repeatedly show the dialog until there is at least one unlocked collection
FdoSecrets::settings()->setUnlockBeforeSearch(true);
// when only unlocking the one with no exposed group, a second dialog is shown