* vpn: ship our own container image
The container image used in the VPN chart should be reproducible and
stable. We're sticking close to the original nixery.dev version by
building the image with nix ourselves, and then publishing the single
layer from the result with Bazel OCI rules. The resulting image should
be handled similar to s3proxy: it's built as a part of the Constellation
release process and then consumed from a Helm chart in our registry.
Co-authored-by: Malte Poll <1780588+malt3@users.noreply.github.com>
Long lists of items in source code or config can be hard to work with as
a human, most problematic being out-of-order entries in an otherwise
ordered list. This is where keep-sorted comes to the rescue: we can
leave two little comments on every listing we care about, and
keep-sorted ensures that the listing stays in order.
This commit also applied keep-sorted to the CODEOWNERS file, hopefully
demonstrating its usefulness to some extent. I'd expect more uses for
keep-sorted to be discovered organically over time.
keep-sorted is super fast, so it should not be a problem to add it to
the //:tidy target, even if we scan all files in the code base. On my
MacBook:
$ time (find . -not -path "./.git/*" -type f | sort | xargs "${keep_sorted}" --mode fix)
real 0m0.249s
user 0m0.124s
sys 0m0.129s
This rule combines uplosi, the upload command, measurement code and cosign
to upload OS images, extract measurements, sign them and upload the measurements.
We had to switch to a Go toolchain from nixpkgs,
since prebuilt Go toolchain versions were not usable on NixOS.
Since Go 1.21, the prebuilt Go toolchain is statically linked
and works out of the box.
Reference: https://github.com/golang/go/issues/57007
rules_oci spawns local container registry processes and in the past,
those would not be cleaned up explicitly, leading to an accumulation
of processes when using remote execution with buildbarn.
This pre-release contains a fix: https://github.com/bazel-contrib/rules_oci/pull/421
Additionally, windows support for rules_oci was removed in this fork,
since it is currently broken.
RFC 015 proposes the introduction of data URLs to materialize static
content to files on disk. This commit adds support for data URLs to the
installer. The corresponding content will be added to versions.go in a
subsequent commit.
There used to be three definitions of a Component type, and conversion
routines between the three. Since the use case is always the same, and
the Component semantics are defined by versions.go and the installer, it
seems appropriate to define the Component type there and import it in
the necessary places.
This rule allows overwriting a binaries' rpath.
This is required to use binaries built by Bazel that link against cc_library
targets from nix (like `/nix/store/<hash>/lib/*.so`).
Default platform for targeting Constellation OS images with nix and cgo:
//bazel/platforms:constellation_os
Other target platforms with nix and cgo:
//bazel/platforms:aarch64-darwin_nix
//bazel/platforms:aarch64-linux_nix
//bazel/platforms:x86_64-darwin_nix
//bazel/platforms:x86_64-linux_nix
Pure go platforms (no cgo, statically linked)
//bazel/platforms:go-pure_aarch64-darwin
//bazel/platforms:go-pure_aarch64-linux
//bazel/platforms:go-pure_x86_64-darwin
//bazel/platforms:go-pure_x86_64-linux
* cli: move internal packages
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* cli: fix buildfiles
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* bazel: fix exclude dir
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* cli: move back libraries that will not be used by TF provider
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
---------
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* custom byte slice marshalling
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* byte slice compatibility
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* other byte slice compat test
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add missing dep
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* export byte type alias
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* regenerate exported type
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* test marshal and unmarshal together
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
---------
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* [wip] use state file in CLI
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
tidy
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* use state file in CLI
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
take clusterConfig from IDFile for compat
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
various fixes
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
wip
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add GCP-specific values in Helm loader test
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove unnecessary pointer
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* write ClusterValues in one step
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* move stub to test file
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove mention of id-file
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* move output to `migrateTerraform`
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* unconditional assignments converting from idFile
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* move require block in go modules file
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* fall back to id file on upgrade
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* tidy
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* fix linter check
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add notice to remove Terraform state check on manual migration
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add `name` field
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
fix name tests
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* return early if no Terraform diff
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* tidy
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* return infrastructure state even if no diff exists
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add TODO to remove comment
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* use state-file in miniconstellation
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* cli: remove id-file (#2402)
* remove id-file from `constellation create`
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add file renaming to handler
* rename id-file after upgrade
* use idFile on `constellation init`
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove id-file from `constellation verify`
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* linter fixes
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove id-file from `constellation mini`
* remove id-file from `constellation recover`
* linter fixes
* remove id-file from `constellation terminate`
* fix initSecret type
* fix recover argument precedence
* fix terminate test
* generate
* add TODO to remove id-file removal
* Update cli/internal/cmd/init.go
Co-authored-by: Adrian Stobbe <stobbe.adrian@gmail.com>
* fix verify arg parse logic
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* add version test
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove id-file from docs
* add file not found log
* use state-file in miniconstellation
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove id-file from `constellation iam destroy`
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* remove id-file from `cdbg deploy`
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
---------
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
Co-authored-by: Adrian Stobbe <stobbe.adrian@gmail.com>
* use state-file in CI
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
* update orchestration docs
---------
Signed-off-by: Moritz Sanft <58110325+msanft@users.noreply.github.com>
Co-authored-by: Adrian Stobbe <stobbe.adrian@gmail.com>
Encrypt each object with a random DEK and attach
the encrypted DEK as object metadata.
Encrpt the DEK with a key from the keyservice.
All objects use the same KEK until a keyrotation
takes place.
INSECURE!
The proxy intercepts GetObject and PutObject.
A manual deployment guide is included.
The decryption only relies on a hardcoded, static key.
Do not use with sensitive data; testing only.
* Ticket to track ranged GetObject: AB#3466.
