mirror of https://github.com/TheCommsChannel/TC2-BBS-mesh.git synced 2024-10-01 01:15:36 -04:00

A BBS server for Meshtastic for posting bulletins, sending mail to users, and channel directory.

Go to file

TC² f10495a974 Update README.md README.md fixes		2024-06-28 08:35:19 -04:00
docker	add fortunes.txt check for docker	2024-06-27 20:18:47 +02:00
.gitignore	Added gitignore	2024-06-28 01:13:15 -04:00
command_handlers.py	Add files via upload	2024-06-25 08:50:52 -04:00
config_init.py	Update config_init.py	2024-06-25 18:15:46 -04:00
config.ini	Update config.ini	2024-06-26 12:06:00 -04:00
db_operations.py	Fixed confusing date format	2024-06-28 01:41:08 -04:00
fortunes.txt	Add files via upload	2024-06-25 08:50:52 -04:00
LICENSE	Initial commit	2024-06-25 08:13:23 -04:00
mesh-bbs.service	Updates for systemd	2024-06-28 08:18:12 -04:00
message_processing.py	Add files via upload	2024-06-25 08:50:52 -04:00
README.md	Update README.md	2024-06-28 08:35:19 -04:00
requirements.txt	Add files via upload	2024-06-25 08:50:52 -04:00
server.py	Fixed 100% SPU isage in idle loop	2024-06-28 01:16:39 -04:00
utils.py	Add files via upload	2024-06-25 08:50:52 -04:00

README.md

TC²-BBS Meshtastic Version

This is the TC²-BBS system integrated with Meshtastic devices. The system allows for message handling, bulletin boards, mail systems, and a channel directory.

Setup

Docker installation

If you're a Docker user, TC²-BBS Meshtastic is available on Docker Hub!

Requirements

Python 3.x
Meshtastic
pypubsub

Installation

Clone the repository:

cd ~
git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.git
cd TC2-BBS-mesh

Set up a Python virtual environment:
```
python -m venv venv
```
Activate the virtual environment:
- On Windows:
```
venv\Scripts\activate  
```
- On macOS and Linux:
```
source venv/bin/activate
```
Install the required packages:
```
pip install -r requirements.txt
```
Set up the configuration in config.ini:

[interface]
If using type = serial and you have multiple devices connected, you will need to uncomment the port = line and enter the port of your device.

Linux Example:
port = /dev/ttyUSB0

Windows Example:
port = COM3

If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device.

[sync]
Enter a list of other BBS nodes you would like to sync messages and bulletins with. Separate each by comma and no spaces as shown in the example below.
You can find the nodeID in the menu under Radio Configuration > User for each node, or use this script for getting nodedb data from a device:

Meshtastic-Python-Examples/print-nodedb.py at main · pdxlocations/Meshtastic-Python-Examples (github.com)

Example Config:
```
[interface]  
type = serial  
# port = /dev/ttyUSB0  
# hostname = 192.168.x.x  

[sync]  
bbs_nodes = !f53f4abc,!f3abc123  
```

Running the Server

Run the server with:

python server.py```

Be sure you've followed the Python virtual environment steps above and activated it before running.

Automatically run at boot

If you would like to have the script automatically run at boot, follow the steps below:

Edit the service file

First, edit the mesh-bbs.service file using your preferred text editor. The 3 following lines in that file are what we need to edit:
```
User=pi
WorkingDirectory=/home/pi/TC2-BBS-mesh
ExecStart=/home/pi/TC2-BBS-mesh/venv/bin/python3 /home/pi/TC2-BBS-mesh/server.py
```
The file is currently setup for a user named 'pi' and assumes that the TC2-BBS-mesh directory is located in the home directory (which it should be if the earlier directions were followed)

We just need to replace the 4 parts that have "pi" in those 3 lines with your username.
Configuring systemd From the TC2-BBS-mesh directory, run the following commands:
```
sudo cp mesh-bbs.service /etc/systemd/system/
```
```
sudo systemctl enable mesh-bbs.service
```
```
sudo systemctl start mesh-bbs.service
```
The service should be started now and should start anytime your device is powered on or rebooted. You can check the status ofk the service by running the following command:
```
sudo systemctl status mesh-bbs.service
```
If you need to stop the service, you can run the following:
```
sudo systemctl stop mesh-bbs.service
```
If you make changes to the watchlist.txt file, you will need to restart the service with the following command:
```
sudo systemctl restart mesh-bbs.service
```

Features

Mail System: Send and receive mail messages.
Bulletin Boards: Post and view bulletins on various boards.
Channel Directory: Add and view channels in the directory.
Statistics: View statistics about nodes, hardware, and roles.
Wall of Shame: View devices with low battery levels.
Fortune Teller: Get a random fortune. Pulls from the fortunes.txt file. Feel free to edit this file remove or add more if you like.

Usage

You interact with the BBS by sending direct messages to the node that's connected to the system running the Python script. Sending any message to it will get a response with the main menu.
Make selections by sending messages based on the letter or number in brackets - Send M for [M]ail Menu for example.

A video of it in use is available on our YouTube channel:

Thanks

Big thanks to Meshtastic and pdxlocations for the great Python examples:

python/examples at master · meshtastic/python (github.com)

pdxlocations/Meshtastic-Python-Examples (github.com)

License

GNU General Public License v3.0