CloseButton Close Tab Sekmeyi kapat Debugger::JSAgentWatchData [Array of length %1] <undefined> FakeReply Fake error! Invalid URL MAC_APPLICATION_MENU Services Hide %1 Hide Others Show All Preferences... Quit %1 About %1 Phonon:: Notifications Music Video Communication Games Accessibility Phonon::AudioOutput <html>The audio playback device %1 does not work. Falling back to %2.</html> <html>Switching to the audio playback device %1 which just became available and has higher preference.</html> Revert back to device '%1' <html>Switching to the audio playback device %1 which has higher preference or is specifically configured for this stream.</html> Phonon::Gstreamer::Backend Warning: You do not seem to have the package gstreamer0.10-plugins-good installed. Some video features have been disabled. Warning: You do not seem to have the base GStreamer plugins installed. All audio and video support has been disabled Phonon::Gstreamer::MediaObject Cannot start playback. Check your GStreamer installation and make sure you have libgstreamer-plugins-base installed. Missing codec helper script assistant. Plugin codec installation failed for codec: %0 A required codec is missing. You need to install the following codec(s) to play this content: %0 Could not open media source. Invalid source type. Could not locate media source. Could not open audio device. The device is already in use. Could not decode media source. Phonon::MMF Audio Output The audio output device No error Not found Out of memory Not supported Overflow Underflow Already exists Path not found In use Not ready Access denied Could not connect Disconnected Permission denied Insufficient bandwidth Network unavailable Network communication error Streaming not supported Server alert Invalid protocol Invalid URL Multicast error Proxy server error Proxy server not supported Audio output error Video output error Decoder error Audio or video components could not be played DRM error Unknown error (%1) Phonon::MMF::AbstractMediaPlayer Not ready to play Error opening file Error opening URL Error opening resource Error opening source: resource not opened Setting volume failed Loading clip failed Playback complete Download error Phonon::MMF::AbstractVideoPlayer Pause failed Seek failed Getting position failed Opening clip failed Phonon::MMF::AudioEqualizer %1 Hz Phonon::MMF::AudioPlayer Getting position failed Phonon::MMF::DsaVideoPlayer Video display error Phonon::MMF::EffectFactory Enabled Phonon::MMF::EnvironmentalReverb Decay HF ratio (%) DecayHFRatio: Ratio of high-frequency decay time to the value specified by DecayTime. Decay time (ms) DecayTime: Time over which reverberation is diminished. Density (%) Density Delay between first and subsequent reflections. Note that the S60 platform documentation does not make clear the distinction between this value and the Diffusion value. Diffusion (%) Diffusion: Delay between first and subsequent reflections. Note that the S60 platform documentation does not make clear the distinction between this value and the Density value. Reflections delay (ms) ReflectionsDelay: Amount of delay between the arrival of the direct path from the source and the arrival of the first reflection. Reflections level (mB) ReflectionsLevel: Amplitude of reflections. This value is corrected by the RoomLevel to give the final reflection amplitude. Reverb delay (ms) ReverbDelay: Amount of time between arrival of the first reflection and start of the late reverberation. Reverb level (mB) ReverbLevel: Amplitude of reverberations. This value is corrected by the RoomLevel to give the final reverberation amplitude. Room HF level RoomHFLevel: Amplitude of low-pass filter used to attenuate the high frequency component of reflected sound. Room level (mB) RoomLevel: Master volume control for all reflected sound. Phonon::MMF::MediaObject Error opening source: type not supported Error opening source: resource is compressed Error opening source: resource not valid Error opening source: media type could not be determined Failed to set requested IAP Phonon::MMF::StereoWidening Level (%) Phonon::MMF::SurfaceVideoPlayer Video display error Phonon::VolumeSlider Volume: %1% Use this slider to adjust the volume. The leftmost position is 0%. The rightmost is %1% Muted Q3Accel %1, %2 not defined Ambiguous %1 not handled Q3DataTable True False Insert Update Delete Q3FileDialog Copy or Move a File Read: %1 Write: %1 Cancel All Files (*) Name Size Type Date Attributes &OK Look &in: File &name: File &type: Back One directory up Create New Folder List View Detail View Preview File Info Preview File Contents Read-write Read-only Write-only Inaccessible Symlink to File Symlink to Directory Symlink to Special File Dir Special Open Save As &Open &Save &Rename &Delete R&eload Sort by &Name Sort by &Size Sort by &Date &Unsorted Sort Show &hidden files the file the directory the symlink Delete %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> &Yes &No New Folder 1 New Folder New Folder %1 Find Directory Directories Directory: Error %1 File not found. Check path and filename. All Files (*.*) Open Select a Directory Q3LocalFs Could not read directory %1 Could not create directory %1 Could not remove file or directory %1 Could not rename %1 to %2 Could not open %1 Could not write %1 Q3MainWindow Line up Customize... Q3NetworkProtocol Operation stopped by the user Q3ProgressDialog Cancel İptal Q3TabDialog OK Apply Help Defaults Cancel Q3TextEdit &Undo &Redo Cu&t &Copy &Paste Clear Select All Q3TitleBar System Restore up Minimize Restore down Maximize Close Contains commands to manipulate the window Puts a minimized window back to normal Moves the window out of the way Puts a maximized window back to normal Makes the window full screen Closes the window Displays the name of the window and contains controls to manipulate it Q3ToolBar More... Q3UrlOperator The protocol `%1' is not supported The protocol `%1' does not support listing directories The protocol `%1' does not support creating new directories The protocol `%1' does not support removing files or directories The protocol `%1' does not support renaming files or directories The protocol `%1' does not support getting files The protocol `%1' does not support putting files The protocol `%1' does not support copying or moving files or directories (unknown) Q3Wizard &Cancel < &Back &Next > &Finish &Help QAbstractSocket Socket operation timed out Operation on socket is not supported Host not found Connection refused Connection timed out Socket is not connected Network unreachable QAbstractSpinBox &Select All &Step up Step &down QAccessibleButton Uncheck Check Press QApplication Activate Activates the program's main window Executable '%1' requires Qt %2, found Qt %3. Incompatible Qt Library Error QT_LAYOUT_DIRECTION Translate this string to the string 'LTR' in left-to-right languages or to 'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper widget layout. QAxSelect Select ActiveX Control OK &Cancel COM &Object: QCheckBox Uncheck Check Toggle QColorDialog Hu&e: T&on: &Sat: &Doygunluk: &Val: &Değer: &Red: &Kırmızı: &Green: &Yeşil: Bl&ue: Ma&vi: A&lpha channel: A&lfa kanalı: Select Color &Basic colors &Temel renkler &Custom colors &Özel renkler &Add to Custom Colors &Özel Renkler Ekle QComboBox False Yanlış True Doğru Open Aç Close Kapat QCoreApplication %1: already exists QSystemSemaphore %1: does not exist QSystemSemaphore %1: out of resources QSystemSemaphore %1: permission denied QSystemSemaphore %1: unknown error %2 QSystemSemaphore %1: key is empty QSystemSemaphore %1: unable to make key QSystemSemaphore %1: ftok failed QSystemSemaphore QDB2Driver Unable to connect Unable to commit transaction Unable to rollback transaction Unable to set autocommit QDB2Result Unable to execute statement Unable to prepare statement Unable to bind variable Unable to fetch record %1 Unable to fetch next Unable to fetch first QDateTimeEdit AM ÖÖ am öö PM ÖS pm ös QDeclarativeAbstractAnimation Cannot animate non-existent property "%1" Cannot animate read-only property "%1" Animation is an abstract class QDeclarativeAnchorAnimation Cannot set a duration of < 0 QDeclarativeAnchors Possible anchor loop detected on fill. Possible anchor loop detected on centerIn. Cannot anchor to an item that isn't a parent or sibling. Possible anchor loop detected on vertical anchor. Possible anchor loop detected on horizontal anchor. Cannot specify left, right, and hcenter anchors. Cannot anchor to a null item. Cannot anchor a horizontal edge to a vertical edge. Cannot anchor item to self. Cannot specify top, bottom, and vcenter anchors. Baseline anchor cannot be used in conjunction with top, bottom, or vcenter anchors. Cannot anchor a vertical edge to a horizontal edge. QDeclarativeAnimatedImage Qt was built without support for QMovie QDeclarativeApplication Application is an abstract class QDeclarativeBehavior Cannot change the animation assigned to a Behavior. QDeclarativeBinding Binding loop detected for property "%1" QDeclarativeCompiledBindings Binding loop detected for property "%1" QDeclarativeCompiler Invalid property assignment: "%1" is a read-only property Invalid property assignment: unknown enumeration Invalid property assignment: string expected Invalid property assignment: url expected Invalid property assignment: unsigned int expected Invalid property assignment: int expected Invalid property assignment: number expected Invalid property assignment: color expected Invalid property assignment: date expected Invalid property assignment: time expected Invalid property assignment: datetime expected Invalid property assignment: point expected Invalid property assignment: size expected Invalid property assignment: rect expected Invalid property assignment: boolean expected Invalid property assignment: 3D vector expected Invalid property assignment: unsupported type "%1" Element is not creatable. Component elements may not contain properties other than id Invalid component id specification id is not unique Invalid component body specification Component objects cannot declare new properties. Component objects cannot declare new signals. Component objects cannot declare new functions. Cannot create empty component specification "%1.%2" is not available in %3 %4.%5. "%1.%2" is not available due to component versioning. Incorrectly specified signal assignment Cannot assign a value to a signal (expecting a script to be run) Empty signal assignment Empty property assignment Attached properties cannot be used here Non-existent attached object Invalid attached object assignment Cannot assign to non-existent default property Cannot assign to non-existent property "%1" Invalid use of namespace Not an attached property name Invalid use of id property Property has already been assigned a value Invalid grouped property access Cannot assign a value directly to a grouped property Invalid property use Property assignment expected Single property assignment expected Unexpected object assignment Cannot assign object to list Can only assign one binding to lists Cannot assign primitives to lists Cannot assign multiple values to a script property Invalid property assignment: script expected Cannot assign multiple values to a singular property Cannot assign object to property "%1" cannot operate on "%2" Duplicate default property Duplicate property name Property names cannot begin with an upper case letter Illegal property name Duplicate signal name Signal names cannot begin with an upper case letter Illegal signal name Duplicate method name Method names cannot begin with an upper case letter Illegal method name Property value set multiple times Invalid property nesting Cannot override FINAL property Invalid property type Invalid empty ID IDs cannot start with an uppercase letter IDs must start with a letter or underscore IDs must contain only letters, numbers, and underscores ID illegally masks global JavaScript property No property alias location Invalid alias location Invalid alias reference. An alias reference must be specified as <id>, <id>.<property> or <id>.<value property>.<property> Invalid alias reference. Unable to find id "%1" Alias property exceeds alias bounds QDeclarativeComponent Invalid empty URL createObject: value is not an object QDeclarativeConnections Cannot assign to non-existent property "%1" Connections: nested objects not allowed Connections: syntax error Connections: script expected QDeclarativeEngine executeSql called outside transaction() Read-only Transaction Version mismatch: expected %1, found %2 SQL transaction failed transaction: missing callback SQL: database version mismatch QDeclarativeFlipable front is a write-once property back is a write-once property QDeclarativeImportDatabase plugin cannot be loaded for module "%1": %2 module "%1" plugin "%2" not found module "%1" version %2.%3 is not installed module "%1" is not installed "%1": no such directory import "%1" has no qmldir and no namespace - %1 is not a namespace - nested namespaces not allowed local directory is ambiguous. Found in %1 and in %2 is ambiguous. Found in %1 in version %2.%3 and %4.%5 is instantiated recursively is not a type File name case mismatch for "%1" QDeclarativeKeyNavigationAttached KeyNavigation is only available via attached properties QDeclarativeKeysAttached Keys is only available via attached properties QDeclarativeLayoutMirroringAttached LayoutDirection attached property only works with Items LayoutMirroring is only available via attached properties QDeclarativeListModel remove: index %1 out of range insert: value is not an object insert: index %1 out of range move: out of range append: value is not an object set: value is not an object set: index %1 out of range ListElement: cannot contain nested elements ListElement: cannot use reserved "id" property ListElement: cannot use script for property value ListModel: undefined property '%1' QDeclarativeLoader Loader does not support loading non-visual elements. QDeclarativeParentAnimation Unable to preserve appearance under complex transform Unable to preserve appearance under non-uniform scale Unable to preserve appearance under scale of 0 QDeclarativeParentChange Unable to preserve appearance under complex transform Unable to preserve appearance under non-uniform scale Unable to preserve appearance under scale of 0 QDeclarativeParser Illegal unicode escape sequence Illegal character Unclosed string at end of line Illegal escape sequence Unclosed comment at end of file Illegal syntax for exponential number Identifier cannot start with numeric literal Unterminated regular expression literal Invalid regular expression flag '%0' Unterminated regular expression backslash sequence Unterminated regular expression class Syntax error Unexpected token `%1' Expected token `%1' Property value set multiple times Expected type name Invalid import qualifier ID Reserved name "Qt" cannot be used as an qualifier Script import qualifiers must be unique. Script import requires a qualifier Library import requires a version Expected parameter type Invalid property type modifier Unexpected property type modifier Expected property type Readonly not yet supported JavaScript declaration outside Script element QDeclarativePauseAnimation Cannot set a duration of < 0 QDeclarativePixmap Error decoding: %1: %2 Failed to get image from provider: %1 Cannot open: %1 QDeclarativePropertyAnimation Cannot set a duration of < 0 QDeclarativePropertyChanges PropertyChanges does not support creating state-specific objects. Cannot assign to non-existent property "%1" Cannot assign to read-only property "%1" QDeclarativeTextInput Could not load cursor delegate Could not instantiate cursor delegate QDeclarativeTypeLoader Script %1 unavailable Type %1 unavailable Namespace %1 cannot be used as a type %1 %2 QDeclarativeVME Unable to create object of type %1 Cannot assign value %1 to property %2 Cannot assign object type %1 with no default method Cannot connect mismatched signal/slot %1 %vs. %2 Cannot assign an object to signal property %1 Cannot assign object to list Cannot assign object to interface property Unable to create attached object Cannot set properties on %1 as it is null QDeclarativeVisualDataModel Delegate component must be Item type. QDeclarativeXmlListModel Qt was built without support for xmlpatterns QDeclarativeXmlListModelRole An XmlRole query must not start with '/' QDeclarativeXmlRoleList An XmlListModel query must start with '/' or "//" QDial QDial SpeedoMeter SliderHandle QDialog Done Tamam What's This? Bu nedir? QDialogButtonBox OK TAMAM &OK &TAMAM &Save &Kaydet Save Kaydet Open Aç &Cancel &İptal Cancel İptal &Close &Kapat Close Kapat Apply Uygula Reset Sıfırla Help Yardım Don't Save Kaydetme Close without Saving Kaydetmeden Kapat Discard Vazgeç &Yes &Evet Yes to &All &Tümüne Evet &No &Hayır N&o to All Tümüne &Hayır Save All Tümünü Kaydet Abort İptal Retry Yeniden Dene Ignore Yoksay Restore Defaults Öntanımlılara Dön QDirModel Name İsim Size Boyut Kind Match OS X Finder Tip Type All other platforms Tip Date Modified Değiştirilme Tarihi QDockWidget Close Kapat Dock Gömülü Float Float QDoubleSpinBox More Daha Fazla Less Daha Az QErrorMessage Debug Message: Warning: Fatal Error: &Show this message again &OK QFile Destination file exists Will not rename sequential file using block copy Cannot remove source file Cannot open %1 for input Cannot open for output Failure to write block Cannot create %1 for output No file engine available or engine does not support UnMapExtension QFileDialog Look in: Konum: Back Geri Go back Geri git Forward İleri Go forward İleri git Parent Directory Üst Dizin Go to the parent directory Üst Dizine git Create New Folder Yeni Dizin Oluştur Create a New Folder Yeni Dizin Oluştur List View Liste Görünümü Change to list view mode Detail View Ayrıntılı Görünüm Change to detail view mode Files of type: Dosya türü: Find Directory Dizin Bul Open Aç Save As Farklı Kaydet All Files (*) Tüm Dosyalar (*) Show Göster &Rename &Yeniden Adlandır &Delete &Sil Show &hidden files Gizli &dosyaları göster &New Folder &Yeni Dizin Directory: Dizin: File &name: Dosya &adı: &Open &Aç &Save &Kaydet Directories Dizinler &Choose Se&ç %1 Directory not found. Please verify the correct directory name was given. %1 Dizin bulunamadı. Lütfen verilen ismin doğruluğunu kontrol edin. %1 already exists. Do you want to replace it? %1 zaten var. Üzerine yazmak ister misiniz? %1 File not found. Please verify the correct file name was given. %1 Dosya bulunamadı. Lütfen verilen ismin doğruluğunu kontrol edin. New Folder Yeni Dizin '%1' is write protected. Do you want to delete it anyway? '%1' yazma korumalı. Yine de silmek istiyor musunuz? Are sure you want to delete '%1'? '%1' konumunu silmek istediğinizden emin misiniz? Could not delete directory. Dizin silinemedi. Recent Places All Files (*.*) Tüm Dosyalar (*) Remove Sil My Computer Bilgisayarım Drive Disk Sürücüsü File Dosya File Folder Match Windows Explorer Folder All other platforms Dosya Alias Mac OS X Finder Shortcut All other platforms Unknown QFileSystemModel %1 TB %1 GB %1 MB %1 KB %1 bytes Invalid filename The name "%1" can not be used.Try using another name, with fewer characters or no punctuations marks. Name Size Kind Match OS X Finder Type All other platforms Date Modified My Computer Computer %1 byte(s) QFontDatabase Normal Bold Demi Bold Black Demi Light Italic Oblique Any Latin Greek Cyrillic Armenian Hebrew Arabic Syriac Thaana Devanagari Bengali Gurmukhi Gujarati Oriya Tamil Telugu Kannada Malayalam Sinhala Thai Lao Tibetan Myanmar Georgian Khmer Simplified Chinese Traditional Chinese Japanese Korean Vietnamese Symbol Ogham Runic N'Ko QFontDialog Select Font &Font Font st&yle &Size Effects Stri&keout &Underline Sample Wr&iting System QFtp Not connected Host %1 not found Connection refused to host %1 Connection timed out to host %1 Connected to host %1 Connection refused for data connection Unknown error Connecting to host failed: %1 Login failed: %1 Listing directory failed: %1 Changing directory failed: %1 Downloading file failed: %1 Uploading file failed: %1 Removing file failed: %1 Creating directory failed: %1 Removing directory failed: %1 Connection closed Host %1 found Connection to %1 closed Host found Connected to host QGroupBox Toggle QHostInfo No host name given Unknown error QHostInfoAgent No host name given Invalid hostname Unknown address type Host not found Unknown error Unknown error (%1) QHttp HTTPS connection requested but SSL support not compiled in Unknown error Request aborted No server set to connect to Wrong content length Server closed connection unexpectedly Connection refused (or timed out) Host %1 not found HTTP request failed Invalid HTTP response header Unknown authentication method Proxy authentication required Authentication required Invalid HTTP chunked body Error writing response to device Connection refused Connection closed Proxy requires authentication Host requires authentication Data corrupted Unknown protocol specified SSL handshake failed Host %1 found Connected to host %1 Connection to %1 closed Host found Connected to host QHttpSocketEngine Did not receive HTTP response from proxy Error parsing authentication request from proxy Authentication required Proxy denied connection Error communicating with HTTP proxy Proxy server not found Proxy connection refused Proxy server connection timed out Proxy connection closed prematurely QIBaseDriver Error opening database Could not start transaction Unable to commit transaction Unable to rollback transaction QIBaseResult Unable to create BLOB Unable to write BLOB Unable to open BLOB Unable to read BLOB Could not find array Could not get array data Could not get query info Could not start transaction Unable to commit transaction Could not allocate statement Could not prepare statement Could not describe input statement Could not describe statement Unable to close statement Unable to execute query Could not fetch next item Could not get statement info QIODevice Permission denied Too many open files No such file or directory No space left on device Unknown error QInputContext XIM FEP XIM input method Windows input method Mac OS X input method S60 FEP input method QInputDialog Enter a value: Bir değer girin: QLibrary '%1' is not an ELF object (%2) '%1' is not an ELF object '%1' is an invalid ELF object (%2) Plugin verification data mismatch in '%1' The shared library was not found. The file '%1' is not a valid Qt plugin. The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5] The plugin '%1' uses incompatible Qt library. Expected build key "%2", got "%3" The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.) Unknown error Cannot load library %1: %2 Cannot unload library %1: %2 Cannot resolve symbol "%1" in %2: %3 QLineEdit &Undo &Geri Al &Redo &Yinele Cu&t &Kes &Copy &Kopyala &Paste &Yapıştır Delete Sil Select All Tümünü Seç QLocalServer %1: Name error %1: Permission denied %1: Address in use %1: Unknown error %2 QLocalSocket %1: Connection refused %1: Remote closed %1: Invalid name %1: Socket access error %1: Socket resource error %1: Socket operation timed out %1: Datagram too large %1: Connection error %1: The socket operation is not supported %1: Unknown error %1: Unknown error %2 %1: Access denied QMYSQLDriver Unable to open database ' Unable to connect Unable to begin transaction Unable to commit transaction Unable to rollback transaction QMYSQLResult Unable to fetch data Unable to execute query Unable to store result Unable to execute next query Unable to store next result Unable to prepare statement Unable to reset statement Unable to bind value Unable to execute statement Unable to bind outvalues Unable to store statement results QMdiArea (Untitled) QMdiSubWindow - [%1] %1 - [%2] Minimize Maximize Büyüt Unshade Shade Gölge Restore Down Aşağıya Geri Yükle Restore Geri Yükle Close Kapat Help Yardım Menu Menü &Restore &Geri Yükle &Move &Taşı &Size &Boyut Mi&nimize &Küçült Ma&ximize B&üyüt Stay on &Top &Herzaman Üstte &Close &Close QMenu Close Kapat Open Aç Execute QMenuBar Actions Corner Toolbar QMessageBox Show Details... Hide Details... OK TAMAM Help Yardım <h3>About Qt</h3>This program uses Qt version %1. Qt is a C++ toolkit for cross-platform application development.Qt provides single-source portability across MS Windows, Mac OS X, Linux, and all major commercial Unix variants. Qt is also available for embedded devices as Qt for Embedded Linux and Qt for Windows CE.Qt is available under three different licensing options designed to accommodate the needs of our various users.Qt licensed under our commercial license agreement is appropriate for development of proprietary/commercial software where you do not want to share any source code with third parties or otherwise cannot comply with the terms of the GNU LGPL version 2.1 or GNU GPL version 3.0.Qt licensed under the GNU LGPL version 2.1 is appropriate for the development of Qt applications (proprietary or open source) provided you can comply with the terms and conditions of the GNU LGPL version 2.1.Qt licensed under the GNU General Public License version 3.0 is appropriate for the development of Qt applications where you wish to use such applications in combination with software subject to the terms of the GNU GPL version 3.0 or where you are otherwise willing to comply with the terms of the GNU GPL version 3.0.Please see <a href="http://qt.nokia.com/products/licensing">qt.nokia.com/products/licensing</a> for an overview of Qt licensing.Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).Qt is a Nokia product. See <a href="http://qt.nokia.com/">qt.nokia.com</a> for more information. About Qt QMultiInputContext Select IM QMultiInputContextPlugin Multiple input method switcher Multiple input method switcher that uses the context menu of the text widgets QNativeSocketEngine Unable to initialize non-blocking socket Unable to initialize broadcast socket Attempt to use IPv6 socket on a platform with no IPv6 support The remote host closed the connection Network operation timed out Out of resources Unsupported socket operation Protocol type not supported Invalid socket descriptor Host unreachable Network unreachable Permission denied Connection timed out Connection refused The bound address is already in use The address is not available The address is protected Datagram was too large to send Unable to send a message Unable to receive a message Unable to write Network error Another socket is already listening on the same port Operation on non-socket The proxy type is invalid for this operation Unknown error QNetworkAccessCacheBackend Error opening %1 QNetworkAccessDataBackend Invalid URI: %1 QNetworkAccessDebugPipeBackend Write error writing to %1: %2 Socket error on %1: %2 Remote host closed the connection prematurely on %1 QNetworkAccessFileBackend Request for opening non-local file %1 Error opening %1: %2 Write error writing to %1: %2 Cannot open %1: Path is a directory Read error reading from %1: %2 QNetworkAccessFtpBackend No suitable proxy found Cannot open %1: is a directory Logging in to %1 failed: authentication required Error while downloading %1: %2 Error while uploading %1: %2 QNetworkAccessHttpBackend No suitable proxy found QNetworkAccessManager Network access is disabled. QNetworkReply Error downloading %1 - server replied: %2 Protocol "%1" is unknown Network session error. backend start error. Temporary network failure. QNetworkReplyImpl Operation canceled QNetworkSession Invalid configuration. QNetworkSessionPrivateImpl Roaming error Session aborted by user or system The specified configuration cannot be used. Unidentified Error Unknown session error. The session was aborted by the user or system. The requested operation is not supported by the system. Roaming was aborted or is not possible. QOCIDriver Unable to initialize QOCIDriver Unable to logon Unable to begin transaction Unable to commit transaction Unable to rollback transaction QOCIResult Unable to bind column for batch execute Unable to execute batch statement Unable to goto next Unable to alloc statement Unable to prepare statement Unable to get statement type Unable to bind value Unable to execute statement QODBCDriver Unable to connect Unable to connect - Driver doesn't support all functionality required Unable to disable autocommit Unable to commit transaction Unable to rollback transaction Unable to enable autocommit QODBCResult Unable to fetch last QODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configuration Unable to execute statement Unable to fetch Unable to fetch next Unable to fetch first Unable to fetch previous Unable to prepare statement Unable to bind variable QObject PulseAudio Sound Server "%1" duplicates a previous role name and will be disabled. invalid query: "%1" Host not found Could not read image data Sequential device (eg socket) for image read not supported Seek file/device for image read failed Image mHeader read failed Image type not supported Image depth not valid Could not seek to image read footer Could not read footer Image type (non-TrueVision 2.0) not supported Could not reset to start position QPPDOptionsModel Name Value QPSQLDriver Unable to connect Could not begin transaction Could not commit transaction Could not rollback transaction Unable to subscribe Unable to unsubscribe QPSQLResult Unable to create query Unable to prepare statement QPageSetupWidget Form Paper Page size: Width: Height: Paper source: Orientation Portrait Landscape Reverse landscape Reverse portrait Margins top margin left margin right margin bottom margin Centimeters (cm) Millimeters (mm) Inches (in) Points (pt) QPluginLoader The plugin was not loaded. Unknown error QPrintDialog Print A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 C5E DLE Executive Folio Ledger Legal Letter Tabloid US Common #10 Envelope Custom File exists <qt>Do you want to overwrite it?</qt> A0 (841 x 1189 mm) A1 (594 x 841 mm) A2 (420 x 594 mm) A3 (297 x 420 mm) A4 (210 x 297 mm, 8.26 x 11.7 inches) A5 (148 x 210 mm) A6 (105 x 148 mm) A7 (74 x 105 mm) A8 (52 x 74 mm) A9 (37 x 52 mm) B0 (1000 x 1414 mm) B1 (707 x 1000 mm) B2 (500 x 707 mm) B3 (353 x 500 mm) B4 (250 x 353 mm) B5 (176 x 250 mm, 6.93 x 9.84 inches) B6 (125 x 176 mm) B7 (88 x 125 mm) B8 (62 x 88 mm) B9 (44 x 62 mm) B10 (31 x 44 mm) C5E (163 x 229 mm) DLE (110 x 220 mm) Executive (7.5 x 10 inches, 191 x 254 mm) Folio (210 x 330 mm) Ledger (432 x 279 mm) Legal (8.5 x 14 inches, 216 x 356 mm) Letter (8.5 x 11 inches, 216 x 279 mm) Tabloid (279 x 432 mm) US Common #10 Envelope (105 x 241 mm) Print all Print selection Print range Print current page &Options >> &Print &Options << Print to File (PDF) Print to File (Postscript) Local file Write %1 file Print To File ... %1 is a directory. Please choose a different file name. File %1 is not writable. Please choose a different file name. %1 already exists. Do you want to overwrite it? The 'From' value cannot be greater than the 'To' value. OK locally connected Aliases: %1 unknown QPrintPreviewDialog Page Setup %1% Print Preview Next page Previous page First page Last page Fit width Fit page Zoom in Zoom out Portrait Landscape Show single page Show facing pages Show overview of all pages Print Page setup Close Export to PDF Export to PostScript QPrintPropertiesWidget Form Page Advanced QPrintSettingsOutput Form Copies Print range Print all Pages from to Current Page Selection Output Settings Copies: Collate Reverse Options Color Mode Color Grayscale Duplex Printing None Long side Short side QPrintWidget Form Printer Yazıcı &Name: P&roperties Location: Preview Type: Tip: Output &file: ... QProcess Error reading from process Error writing to process Process crashed No program defined Could not open input redirection for reading Could not open output redirection for writing Resource error (fork failure): %1 Process operation timed out Process failed to start: %1 QProgressDialog Cancel İptal QPushButton Open Aç QRadioButton Check QRegExp no error occurred disabled feature used bad char class syntax bad lookahead syntax lookbehinds not supported, see QTBUG-2371 bad repetition syntax invalid octal value missing left delim unexpected end met internal limit invalid interval invalid category QSQLite2Driver Error opening database Unable to begin transaction Unable to commit transaction Unable to rollback transaction QSQLite2Result Unable to fetch results Unable to execute statement QSQLiteDriver Error opening database Error closing database Unable to begin transaction Unable to commit transaction Unable to rollback transaction QSQLiteResult Unable to fetch row No query Unable to execute statement Unable to execute multiple statements at a time Unable to reset statement Unable to bind parameters Parameter count mismatch QScriptBreakpointsModel ID Location Condition Ignore-count Single-shot Hit-count QScriptBreakpointsWidget New Delete QScriptDebugger Go to Line Line: Interrupt Shift+F5 Continue F5 Step Into F11 Step Over F10 Step Out Shift+F11 Run to Cursor Ctrl+F10 Run to New Script Toggle Breakpoint F9 Clear Debug Output Clear Error Log Clear Console &Find in Script... Ctrl+F Find &Next F3 Find &Previous Shift+F3 Ctrl+G Debug QScriptDebuggerCodeFinderWidget Close Previous Next Case Sensitive Whole words <img src=":/qt/scripttools/debugging/images/wrap.png"> Search wrapped QScriptDebuggerLocalsModel Name Value QScriptDebuggerStackModel Level Name Location QScriptEdit Toggle Breakpoint Disable Breakpoint Enable Breakpoint Breakpoint Condition: QScriptEngineDebugger Loaded Scripts Breakpoints Stack Locals Console Debug Output Error Log Search View Qt Script Debugger QScriptNewBreakpointWidget Close QScrollBar Scroll here Buraya kaydır Left edge Sol gölge Top En Yukarı Right edge Sağ gölge Bottom En Aşağı Page left Sayfa sola Page up Sayfa yukarı Page right Sayfa sağa Page down Sayfa aşağı Scroll left Sola kaydır Scroll up Yukarı kaydır Scroll right Sağa kaydır Scroll down Aşağı kaydır Line up Diz Position Konum Line down Satır aşağı QSharedMemory %1: unable to set key on lock %1: create size is less then 0 %1: unable to lock %1: unable to unlock %1: already exists %1: doesn't exists %1: invalid size %1: out of resources %1: permission denied %1: unknown error %2 %1: key is empty %1: doesn't exist %1: UNIX key file doesn't exist %1: ftok failed %1: unable to make key %1: system-imposed size restrictions %1: bad name %1: not attached %1: size query failed QShortcut Space This and all following "incomprehensible" strings in QShortcut context are key names. Please use the localized names appearing on actual keyboards or whatever is commonly used. Esc Tab Backtab Backspace Return Enter Ins Del Pause Print SysReq Home End Left Up Right Down PgUp PgDown CapsLock NumLock ScrollLock Menu Help Back Forward Stop Refresh Volume Down Volume Mute Volume Up Bass Boost Bass Up Bass Down Treble Up Treble Down Media Play Media Stop Media Previous Media Next Media Record Media Pause Media player pause button Toggle Media Play/Pause Media player button to toggle between playing and paused Home Page Favorites Search Standby Open URL Launch Mail Launch Media Launch (0) Launch (1) Launch (2) Launch (3) Launch (4) Launch (5) Launch (6) Launch (7) Launch (8) Launch (9) Launch (A) Launch (B) Launch (C) Launch (D) Launch (E) Launch (F) Monitor Brightness Up Monitor Brightness Down Keyboard Light On/Off Keyboard Brightness Up Keyboard Brightness Down Power Off Wake Up Eject Screensaver WWW Sleep LightBulb Shop History Add Favorite Hot Links Adjust Brightness Finance Community Audio Rewind Back Forward Application Left Application Right Book CD Calculator Clear Clear Grab Close Copy Cut Display DOS Documents Spreadsheet Browser Game Go iTouch Logoff Market Meeting Keyboard Menu Menu PB My Sites News Home Office Option Paste Phone Reply Reload Rotate Windows Rotation PB Rotation KB Save Send Spellchecker Split Screen Support Task Panel Terminal Tools Travel Video Word Processor XFer Zoom In Zoom Out Away Messenger WebCam Mail Forward Pictures Music Battery Bluetooth Wireless Ultra Wide Band Audio Forward Audio Repeat Audio Random Play Subtitle Audio Cycle Track Time Select View Top Menu Suspend Hibernate Print Screen Page Up Page Down Caps Lock Num Lock Number Lock Scroll Lock Insert Delete Escape System Request Yes No Context1 Context2 Context3 Context4 Call Button to start a call (note: a separate button is used to end the call) Hangup Button to end a call (note: a separate button is used to start the call) Toggle Call/Hangup Button that will hang up if we're in call, or make a call if we're not. Flip Voice Dial Button to trigger voice dialing Last Number Redial Button to redial the last number called Camera Shutter Button to trigger the camera shutter (take a picture) Camera Focus Button to focus the camera Kanji Muhenkan Henkan Romaji Hiragana Katakana Hiragana Katakana Zenkaku Hankaku Zenkaku Hankaku Touroku Massyo Kana Lock Kana Shift Eisu Shift Eisu toggle Code input Multiple Candidate Previous Candidate Hangul Hangul Start Hangul End Hangul Hanja Hangul Jamo Hangul Romaja Hangul Jeonja Hangul Banja Hangul PreHanja Hangul PostHanja Hangul Special Ctrl Shift Alt Meta + F%1 QSlider Page left Page up Position Page right Page down QSocks5SocketEngine Connection to proxy refused Connection to proxy closed prematurely Proxy host not found Connection to proxy timed out Proxy authentication failed Proxy authentication failed: %1 SOCKS version 5 protocol error General SOCKSv5 server failure Connection not allowed by SOCKSv5 server TTL expired SOCKSv5 command not supported Address type not supported Unknown SOCKSv5 proxy error code 0x%1 Network operation timed out QSoftKeyManager OK Select Done Options Cancel Exit QSpinBox More Daha Fazla Less Daha Az QSql Delete Delete this record? Yes No Insert Update Save edits? Cancel Confirm Cancel your edits? QSslSocket No error The issuer certificate could not be found The certificate signature could not be decrypted The public key in the certificate could not be read The signature of the certificate is invalid The certificate is not yet valid The certificate has expired The certificate's notBefore field contains an invalid time The certificate's notAfter field contains an invalid time The certificate is self-signed, and untrusted The root certificate of the certificate chain is self-signed, and untrusted The issuer certificate of a locally looked up certificate could not be found No certificates could be verified One of the CA certificates is invalid The basicConstraints path length parameter has been exceeded The supplied certificate is unsuitable for this purpose The root CA certificate is not trusted for this purpose The root CA certificate is marked to reject the specified purpose The current candidate issuer certificate was rejected because its subject name did not match the issuer name of the current certificate The current candidate issuer certificate was rejected because its issuer name and serial number was present and did not match the authority key identifier of the current certificate The peer did not present any certificate The host name did not match any of the valid hosts for this certificate The peer certificate is blacklisted Unknown error Error creating SSL context (%1) Invalid or empty cipher list (%1) Cannot provide a certificate with no key, %1 Error loading local certificate, %1 Error loading private key, %1 Private key does not certify public key, %1 Error creating SSL session, %1 Error creating SSL session: %1 Unable to write data: %1 Unable to decrypt data: %1 Error while reading: %1 Error during SSL handshake: %1 QStateMachine Missing initial state in compound state '%1' Missing default state in history state '%1' No common ancestor for targets and source of transition from state '%1' Unknown error QSymSQLDriver Invalid option: Error opening database POLICY_DB_DEFAULT must be defined before any other POLICY definitions can be used Unable to begin transaction Unable to commit transaction Unable to rollback transaction QSymSQLResult Error retrieving column count Error retrieving column name Error retrieving column type Unable to fetch row Unable to execute statement Statement is not prepared Unable to reset statement Unable to bind parameters Parameter count mismatch QSymbianSocketEngine Unable to initialize non-blocking socket Unable to initialize broadcast socket Attempt to use IPv6 socket on a platform with no IPv6 support The remote host closed the connection Network operation timed out Out of resources Unsupported socket operation Protocol type not supported Invalid socket descriptor Host unreachable Network unreachable Permission denied Connection timed out Connection refused The bound address is already in use The address is not available The address is protected Datagram was too large to send Unable to send a message Unable to receive a message Unable to write Network error Another socket is already listening on the same port Operation on non-socket The proxy type is invalid for this operation The address is invalid for this operation The specified network session is not opened Unknown error QSystemSemaphore %1: permission denied %1: already exists %1: does not exist %1: out of resources %1: name error %1: unknown error %2 QTDSDriver Unable to open connection Unable to use database QTabBar Scroll Left Sola Kaydır Scroll Right Sağa Kaydır Close Kapat Activate Etkinleştir Press Basınız Close the tab Sekmeyi kapat Activate the tab Sekmeyi etkinleştir QTcpServer Operation on socket is not supported QTextControl &Undo &Geri Al &Redo &Yinele Cu&t &Kes &Copy &Kopyala Copy &Link Location &Paste &Yapıştır Delete Sil Select All Tümünü Seç QToolButton Press Basınız Open Aç QUdpSocket This platform does not support IPv6 QUndoGroup Undo %1 Geri Al %1 Undo Default text for undo action Geri Al Redo %1 Yinele %1 Redo Default text for redo action Yinele QUndoModel <empty> <boş> QUndoStack Undo %1 Geri Al %1 Undo Default text for undo action Geri Al Redo %1 Yinele %1 Redo Default text for redo action Yinele QUnicodeControlCharacterMenu LRM Left-to-right mark RLM Right-to-left mark ZWJ Zero width joiner ZWNJ Zero width non-joiner ZWSP Zero width space LRE Start of left-to-right embedding RLE Start of right-to-left embedding LRO Start of left-to-right override RLO Start of right-to-left override PDF Pop directional formatting Insert Unicode control character QWebFrame Request canceled Request blocked Cannot show URL Frame load interrupted by policy change Cannot show mimetype File does not exist Loading is handled by the media engine Request cancelled QWebPage Redirection limit reached %n file(s) number of chosen file Scroll here Left edge Top Right edge Bottom Page left Page up Page right Page down Scroll left Scroll up Scroll right Scroll down JavaScript Alert - %1 JavaScript Confirm - %1 JavaScript Prompt - %1 JavaScript Problem - %1 The script on this page appears to have a problem. Do you want to stop the script? Move the cursor to the next character Move the cursor to the previous character Move the cursor to the next word Move the cursor to the previous word Move the cursor to the next line Move the cursor to the previous line Move the cursor to the start of the line Move the cursor to the end of the line Move the cursor to the start of the block Move the cursor to the end of the block Move the cursor to the start of the document Move the cursor to the end of the document Select to the next character Select to the previous character Select to the next word Select to the previous word Select to the next line Select to the previous line Select to the start of the line Select to the end of the line Select to the start of the block Select to the end of the block Select to the start of the document Select to the end of the document Delete to the start of the word Delete to the end of the word Insert a new paragraph Insert a new line Paste and Match Style Remove formatting Strikethrough Subscript Superscript Insert Bulleted List Insert Numbered List Indent Outdent Center Justify Align Left Align Right Web Inspector - %2 Submit Submit (input element) alt text for <input> elements with no alt, title, or value Reset default label for Reset buttons in forms on web pages This is a searchable index. Enter search keywords: text that appears at the start of nearly-obsolete web pages in the form of a 'searchable index' Submit default label for Submit buttons in forms on web pages Choose File title for file button used in HTML forms No file selected text to display in file button used in HTML forms when no file is selected Details text to display in <details> tag when it has no <summary> child Open in New Window Open in New Window context menu item Save Link... Download Linked File context menu item Copy Link Copy Link context menu item Open Image Open Image in New Window context menu item Save Image Download Image context menu item Copy Image Copy Link context menu item Copy Image Address Copy Image Address menu item Open Video Open Video in New Window Open Audio Open Audio in New Window Copy Video Copy Video Link Location Copy Audio Copy Audio Link Location Toggle Controls Toggle Media Controls Toggle Loop Toggle Media Loop Playback Enter Fullscreen Switch Video to Fullscreen Play Play Pause Pause Mute Mute Open Frame Open Frame in New Window context menu item Copy Copy context menu item Go Back Back context menu item Go Forward Forward context menu item Stop Stop context menu item Reload Reload context menu item Cut Cut context menu item Paste Paste context menu item Select All Select All context menu item No Guesses Found No Guesses Found context menu item Ignore Ignore Spelling context menu item Add To Dictionary Learn Spelling context menu item Search The Web Search The Web context menu item Look Up In Dictionary Look Up in Dictionary context menu item Open Link Open Link context menu item Ignore Ignore Grammar context menu item Spelling Spelling and Grammar context sub-menu item Show Spelling and Grammar menu item title Hide Spelling and Grammar menu item title Check Spelling Check spelling context menu item Check Spelling While Typing Check spelling while typing context menu item Check Grammar With Spelling Check grammar with spelling context menu item Fonts Font context sub-menu item Bold Bold context menu item Italic Italic context menu item Underline Underline context menu item Outline Outline context menu item Direction Writing direction context sub-menu item Text Direction Text direction context sub-menu item Default Default writing direction context menu item Left to Right Left to Right context menu item Right to Left Right to Left context menu item Inspect Inspect Element context menu item No recent searches Label for only item in menu that appears when clicking on the search field image, when no searches have been performed Recent searches label for first item in the menu that appears when clicking on the search field image, used as embedded menu title Clear recent searches menu item in Recent Searches menu that empties menu's contents Missing Plug-in Label text to be used when a plug-in is missing Unknown Unknown filesize FTP directory listing item %1 (%2x%3 pixels) Title string for images Loading... Media controller status message when the media is loading Live Broadcast Media controller status message when watching a live broadcast Audio Element Media controller element Video Element Media controller element Mute Button Media controller element Unmute Button Media controller element Play Button Media controller element Pause Button Media controller element Slider Media controller element Slider Thumb Media controller element Rewind Button Media controller element Return to Real-time Button Media controller element Elapsed Time Media controller element Remaining Time Media controller element Status Display Media controller element Fullscreen Button Media controller element Seek Forward Button Media controller element Seek Back Button Media controller element Audio element playback controls and status display Media controller element Video element playback controls and status display Media controller element Mute audio tracks Media controller element Unmute audio tracks Media controller element Begin playback Media controller element Pause playback Media controller element Movie time scrubber Media controller element Movie time scrubber thumb Media controller element Rewind movie Media controller element Return streaming movie to real-time Media controller element Current movie time Media controller element Remaining movie time Media controller element Current movie status Media controller element Play movie in full-screen mode Media controller element Seek quickly back Media controller element Seek quickly forward Media controller element Indefinite time Media time description %1 days %2 hours %3 minutes %4 seconds Media time description %1 hours %2 minutes %3 seconds Media time description %1 minutes %2 seconds Media time description %1 seconds Media time description QWhatsThisAction What's This? Bu nedir? QWidget * * QWizard Go Back Geri Git < &Back < &Geri Continue Devam Et &Next &İleri &Next > &İleri > Commit Gönder Done Tamam &Finish &Bitir Cancel İptal Help Yardım &Help &Yardım QWorkspace Close Kapat Minimize Küçült Restore Down Aşağıya Geri Yükle &Restore &Geri Yükle &Move &Taşı &Size &Boyut Mi&nimize &Küçült Ma&ximize B&üyüt &Close &Kapat Stay on &Top &Herzaman Üstte Sh&ade G&ölgele %1 - [%2] %1 - [%2] &Unshade Gölgele&me QXml no error occurred error triggered by consumer unexpected end of file more than one document type definition error occurred while parsing element tag mismatch error occurred while parsing content unexpected character invalid name for processing instruction version expected while reading the XML declaration wrong value for standalone declaration encoding declaration or standalone declaration expected while reading the XML declaration standalone declaration expected while reading the XML declaration error occurred while parsing document type definition letter is expected error occurred while parsing comment error occurred while parsing reference internal general entity reference not allowed in DTD external parsed general entity reference not allowed in attribute value external parsed general entity reference not allowed in DTD unparsed entity reference in wrong context recursive entities error in the text declaration of an external entity QXmlPatternistCLI Warning in %1, at line %2, column %3: %4 Warning in %1: %2 Unknown location Error %1 in %2, at line %3, column %4: %5 Error %1 in %2: %3 QXmlStream Extra content at end of document. Invalid entity value. Invalid XML character. Sequence ']]>' not allowed in content. Encountered incorrectly encoded content. Namespace prefix '%1' not declared Illegal namespace declaration. Attribute redefined. Unexpected character '%1' in public id literal. Invalid XML version string. Unsupported XML version. The standalone pseudo attribute must appear after the encoding. %1 is an invalid encoding name. Encoding %1 is unsupported Standalone accepts only yes or no. Invalid attribute in XML declaration. Premature end of document. Invalid document. Expected , but got ' Unexpected ' Expected character data. Recursive entity detected. Start tag expected. NDATA in parameter entity declaration. XML declaration not at start of document. %1 is an invalid processing instruction name. Invalid processing instruction name. %1 is an invalid PUBLIC identifier. Invalid XML name. Opening and ending tag mismatch. Entity '%1' not declared. Reference to unparsed entity '%1'. Reference to external entity '%1' in attribute value. Invalid character reference. QmlJSDebugger::LiveSelectionTool Items QmlJSDebugger::QmlToolBar Inspector Mode Play/Pause Animations Select Select (Marquee) Zoom Color Picker Apply Changes to QML Viewer Apply Changes to Document Tools 1x 0.5x 0.25x 0.125x 0.1x QmlJSDebugger::ToolBarColorBox Copy Color QmlJSDebugger::ZoomTool Zoom to &100% Zoom In Zoom Out QtXmlPatterns %1 is an unsupported encoding. %1 contains octets which are disallowed in the requested encoding %2. The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character. Network timeout. Element %1 can't be serialized because it appears outside the document element. Attribute %1 can't be serialized because it appears at the top level. Year %1 is invalid because it begins with %2. Day %1 is outside the range %2..%3. Month %1 is outside the range %2..%3. Overflow: Can't represent date %1. Day %1 is invalid for month %2. Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; Time %1:%2:%3.%4 is invalid. Overflow: Date can't be represented. At least one component must be present. At least one time component must appear after the %1-delimiter. %1 is not a valid value of type %2. When casting to %1 from %2, the source value cannot be %3. Integer division (%1) by zero (%2) is undefined. Division (%1) by zero (%2) is undefined. Modulus division (%1) by zero (%2) is undefined. Dividing a value of type %1 by %2 (not-a-number) is not allowed. Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed. Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed. A value of type %1 cannot have an Effective Boolean Value. Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values. Value %1 of type %2 exceeds maximum (%3). Value %1 of type %2 is below minimum (%3). A value of type %1 must contain an even number of digits. The value %2 does not. %1 is not valid as a value of type %2. Ambiguous rule match. Operator %1 cannot be used on type %2. Operator %1 cannot be used on atomic values of type %2 and %3. The namespace URI in the name for a computed attribute cannot be %1. The name for a computed attribute cannot have the namespace URI %1 with the local name %2. Type error in cast, expected %1, received %2. When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed. A comment cannot contain %1 A comment cannot end with a %1. In a namespace constructor, the value for a namespace cannot be an empty string. The prefix must be a valid %1, which %2 is not. The prefix %1 cannot be bound. Only the prefix %1 can be bound to %2 and vice versa. An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place. A library module cannot be evaluated directly. It must be imported from a main module. No template by name %1 exists. A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type. A positional predicate must evaluate to a single numeric value. The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid. %1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3. The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two. The data of a processing instruction cannot contain the string %1 No namespace binding exists for the prefix %1 No namespace binding exists for the prefix %1 in %2 %1 is an invalid %2 The parameter %1 is passed, but no corresponding %2 exists. The parameter %1 is required, but no corresponding %2 is supplied. %1 takes at most %n argument(s). %2 is therefore invalid. %1 requires at least %n argument(s). %2 is therefore invalid. The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration. The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1 is not a valid XML 1.0 character. The root node of the second argument to function %1 must be a document node. %2 is not a document node. If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same. %1 was called. %1 must be followed by %2 or %3, not at the end of the replacement string. In the replacement string, %1 must be followed by at least one digit when not escaped. In the replacement string, %1 can only be used to escape itself or %2, not %3 %1 matches newline characters %1 and %2 match the start and end of a line. Matches are case insensitive Whitespace characters are removed, except when they appear in character classes %1 is an invalid regular expression pattern: %2 %1 is an invalid flag for regular expressions. Valid flags are: If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified. It will not be possible to retrieve %1. The default collection is undefined %1 cannot be retrieved The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization). A zone offset must be in the range %1..%2 inclusive. %3 is out of range. %1 is not a whole number of minutes. The URI cannot have a fragment Required cardinality is %1; got cardinality %2. The item %1 did not match the required type %2. The variable %1 is unused W3C XML Schema identity constraint selector W3C XML Schema identity constraint field A construct was encountered which is disallowed in the current language(%1). %1 is an unknown schema type. A template with name %1 has already been declared. %1 is not a valid numeric literal. Only one %1 declaration can occur in the query prolog. The initialization of variable %1 depends on itself No variable with name %1 exists Version %1 is not supported. The supported XQuery version is 1.0. The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2. No function with signature %1 is available A default namespace declaration must occur before function, variable, and option declarations. Namespace declarations must occur before function, variable, and option declarations. Module imports must occur before function, variable, and option declarations. The keyword %1 cannot occur with any other mode name. The value of attribute %1 must be of type %2, which %3 isn't. It is not possible to redeclare prefix %1. The prefix %1 cannot be bound. By default, it is already bound to the namespace %2. Prefix %1 is already declared in the prolog. The name of an option must have a prefix. There is no default namespace for options. The Schema Import feature is not supported, and therefore %1 declarations cannot occur. The target namespace of a %1 cannot be empty. The module import feature is not supported A variable with name %1 has already been declared. No value is available for the external variable with name %1. A stylesheet function must have a prefixed name. The namespace for a user defined function cannot be empty (try the predefined prefix %1, which exists for cases like this) The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases. The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2 A function already exists with the signature %1. No external functions are supported. All supported functions can be used directly, without first declaring them as external An argument with name %1 has already been declared. Every argument name must be unique. When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal. In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching. In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching. In an XSL-T pattern, function %1 cannot have a third argument. In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching. In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can. %1 is an invalid template mode name. The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide. The Schema Validation Feature is not supported. Hence, %1-expressions may not be used. None of the pragma expressions are supported. Therefore, a fallback expression must be present Each name of a template parameter must be unique; %1 is duplicated. The %1-axis is unsupported in XQuery No function with name %1 is available. The namespace URI cannot be the empty string when binding to a prefix, %1. %1 is an invalid namespace URI. It is not possible to bind to the prefix %1 Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared). Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared). Two namespace declaration attributes have the same name: %1. The namespace URI must be a constant and cannot use enclosed expressions. An attribute with name %1 has already appeared on this element. A direct element constructor is not well-formed. %1 is ended with %2. The name %1 does not refer to any schema type. %1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works. %1 is not an atomic type. Casting is only possible to atomic types. %1 is not a valid name for a processing-instruction. %1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported. The name of an extension expression must be in a namespace. Element %1 is not allowed at this location. Text nodes are not allowed at this location. Parse error: %1 The value of the XSL-T version attribute must be a value of type %1, which %2 isn't. Running an XSL-T 1.0 stylesheet with a 2.0 processor. Unknown XSL-T attribute %1. Attribute %1 and %2 are mutually exclusive. In a simplified stylesheet module, attribute %1 must be present. If element %1 has no attribute %2, it cannot have attribute %3 or %4. Element %1 must have at least one of the attributes %2 or %3. At least one mode must be specified in the %1-attribute on element %2. Element %1 must come last. At least one %1-element must occur before %2. Only one %1-element can appear. At least one %1-element must occur inside %2. When attribute %1 is present on %2, a sequence constructor cannot be used. Element %1 must have either a %2-attribute or a sequence constructor. When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor. Element %1 cannot have children. Element %1 cannot have a sequence constructor. The attribute %1 cannot appear on %2, when it is a child of %3. A parameter in a function cannot be declared to be a tunnel. This processor is not Schema-aware and therefore %1 cannot be used. Top level stylesheet elements must be in a non-null namespace, which %1 isn't. The value for attribute %1 on element %2 must either be %3 or %4, not %5. Attribute %1 cannot have the value %2. The attribute %1 can only appear on the first %2 element. At least one %1 element must appear as child of %2. Empty particle cannot be derived from non-empty particle. Derived particle is missing element %1. Derived element %1 is missing value constraint as defined in base particle. Derived element %1 has weaker value constraint than base particle. Fixed value constraint of element %1 differs from value constraint in base particle. Derived element %1 cannot be nillable as base element is not nillable. Block constraints of derived element %1 must not be more weaker than in the base element. Simple type of derived element %1 cannot be validly derived from base element. Complex type of derived element %1 cannot be validly derived from base element. Element %1 is missing in derived particle. Element %1 does not match namespace constraint of wildcard in base particle. Wildcard in derived particle is not a valid subset of wildcard in base particle. processContent of wildcard in derived particle is weaker than wildcard in base particle. Derived particle allows content that is not allowed in the base particle. %1 has inheritance loop in its base type %2. Circular inheritance of base type %1. Circular inheritance of union %1. %1 is not allowed to derive from %2 by restriction as the latter defines it as final. %1 is not allowed to derive from %2 by extension as the latter defines it as final. Base type of simple type %1 cannot be complex type %2. Simple type %1 cannot have direct base type %2. Simple type %1 is not allowed to have base type %2. Simple type %1 can only have simple atomic type as base type. Simple type %1 cannot derive from %2 as the latter defines restriction as final. Variety of item type of %1 must be either atomic or union. Variety of member types of %1 must be atomic. %1 is not allowed to derive from %2 by list as the latter defines it as final. Simple type %1 is only allowed to have %2 facet. Base type of simple type %1 must have variety of type list. Base type of simple type %1 has defined derivation by restriction as final. Item type of base type does not match item type of %1. Simple type %1 contains not allowed facet type %2. %1 is not allowed to derive from %2 by union as the latter defines it as final. %1 is not allowed to have any facets. Base type %1 of simple type %2 must have variety of union. Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute. Member type %1 cannot be derived from member type %2 of %3's base type %4. Derivation method of %1 must be extension because the base type %2 is a simple type. Complex type %1 has duplicated element %2 in its content model. Complex type %1 has non-deterministic content. Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3. Content model of complex type %1 is not a valid extension of content model of %2. Complex type %1 must have simple content. Complex type %1 must have the same simple type as its base class %2. Complex type %1 cannot be derived from base type %2%3. Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3. Complex type %1 with simple content cannot be derived from complex base type %2. Item type of simple type %1 cannot be a complex type. Member type of simple type %1 cannot be a complex type. %1 is not allowed to have a member type with the same name as itself. %1 facet collides with %2 facet. %1 facet must have the same value as %2 facet of base type. %1 facet must be equal or greater than %2 facet of base type. %1 facet must be less than or equal to %2 facet of base type. %1 facet contains invalid regular expression Unknown notation %1 used in %2 facet. %1 facet contains invalid value %2: %3. %1 facet cannot be %2 or %3 if %4 facet of base type is %5. %1 facet cannot be %2 if %3 facet of base type is %4. %1 facet must be less than or equal to %2 facet. %1 facet must be less than %2 facet of base type. %1 facet and %2 facet cannot appear together. %1 facet must be greater than %2 facet of base type. %1 facet must be less than %2 facet. %1 facet must be greater than or equal to %2 facet of base type. Simple type contains not allowed facet %1. %1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list. Only %1 and %2 facets are allowed when derived by union. %1 contains %2 facet with invalid data: %3. Attribute group %1 contains attribute %2 twice. Attribute group %1 contains two different attributes that both have types derived from %2. Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3. Complex type %1 contains attribute %2 twice. Complex type %1 contains two different attributes that both have types derived from %2. Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3. Element %1 is not allowed to have a value constraint if its base type is complex. Element %1 is not allowed to have a value constraint if its type is derived from %2. Value constraint of element %1 is not of elements type: %2. Element %1 is not allowed to have substitution group affiliation as it is no global element. Type of element %1 cannot be derived from type of substitution group affiliation. Value constraint of attribute %1 is not of attributes type: %2. Attribute %1 has value constraint but has type derived from %2. %1 attribute in derived complex type must be %2 like in base type. Attribute %1 in derived complex type must have %2 value constraint like in base type. Attribute %1 in derived complex type must have the same %2 value constraint like in base type. Attribute %1 in derived complex type must have %2 value constraint. processContent of base wildcard must be weaker than derived wildcard. Element %1 exists twice with different types. Particle contains non-deterministic wildcards. Base attribute %1 is required but derived attribute is not. Type of derived attribute %1 cannot be validly derived from type of base attribute. Value constraint of derived attribute %1 does not match value constraint of base attribute. Derived attribute %1 does not exist in the base definition. Derived attribute %1 does not match the wildcard in the base definition. Base attribute %1 is required but missing in derived definition. Derived definition contains an %1 element that does not exists in the base definition Derived wildcard is not a subset of the base wildcard. %1 of derived wildcard is not a valid restriction of %2 of base wildcard Attribute %1 from base type is missing in derived type. Type of derived attribute %1 differs from type of base attribute. Base definition contains an %1 element that is missing in the derived definition Can not process unknown element %1, expected elements are: %2. Element %1 is not allowed in this scope, possible elements are: %2. Child element is missing in that scope, possible child elements are: %1. Document is not a XML schema. %1 attribute of %2 element contains invalid content: {%3} is not a value of type %4. %1 attribute of %2 element contains invalid content: {%3}. Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema. Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema. %1 element is not allowed to have the same %2 attribute value as the target namespace %3. %1 element without %2 attribute is not allowed inside schema without target namespace. %1 element is not allowed inside %2 element if %3 attribute is present. %1 element has neither %2 attribute nor %3 child element. %1 element with %2 child element must not have a %3 attribute. %1 attribute of %2 element must be %3 or %4. %1 attribute of %2 element must have a value of %3. %1 attribute of %2 element must have a value of %3 or %4. %1 element must not have %2 and %3 attribute together. Content of %1 attribute of %2 element must not be from namespace %3. %1 attribute of %2 element must not be %3. %1 attribute of %2 element must have the value %3 because the %4 attribute is set. Specifying use='prohibited' inside an attribute group has no effect. %1 element must have either %2 or %3 attribute. %1 element must have either %2 attribute or %3 or %4 as child element. %1 element requires either %2 or %3 attribute. Text or entity references not allowed inside %1 element %1 attribute of %2 element must contain %3, %4 or a list of URIs. %1 element is not allowed in this context. %1 attribute of %2 element has larger value than %3 attribute. Prefix of qualified name %1 is not defined. %1 attribute of %2 element must either contain %3 or the other values. Component with ID %1 has been defined previously. Element %1 already defined. Attribute %1 already defined. Type %1 already defined. Attribute group %1 already defined. Element group %1 already defined. Notation %1 already defined. Identity constraint %1 already defined. Duplicated facets in simple type %1. %1 references unknown %2 or %3 element %4. %1 references identity constraint %2 that is no %3 or %4 element. %1 has a different number of fields from the identity constraint %2 that it references. Base type %1 of %2 element cannot be resolved. Item type %1 of %2 element cannot be resolved. Member type %1 of %2 element cannot be resolved. Type %1 of %2 element cannot be resolved. Base type %1 of complex type cannot be resolved. %1 cannot have complex base type that has a %2. Content model of complex type %1 contains %2 element, so it cannot be derived by extension from a non-empty type. Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model. Type of %1 element must be a simple type, %2 is not. Substitution group %1 of %2 element cannot be resolved. Substitution group %1 has circular definition. Duplicated element names %1 in %2 element. Reference %1 of %2 element cannot be resolved. Circular group reference for %1. %1 element is not allowed in this scope %1 element cannot have %2 attribute with value other than %3. %1 element cannot have %2 attribute with value other than %3 or %4. %1 or %2 attribute of reference %3 does not match with the attribute declaration %4. Attribute group %1 has circular reference. %1 attribute in %2 must have %3 use like in base type %4. Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2. %1 has attribute wildcard but its base type %2 has not. Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible. Enumeration facet contains invalid content: {%1} is not a value of type %2. Namespace prefix of qualified name %1 is not defined. %1 element %2 is not a valid restriction of the %3 element it redefines: %4. %1 is not valid according to %2. String content does not match the length facet. String content does not match the minLength facet. String content does not match the maxLength facet. String content does not match pattern facet. String content is not listed in the enumeration facet. Signed integer content does not match the maxInclusive facet. Signed integer content does not match the maxExclusive facet. Signed integer content does not match the minInclusive facet. Signed integer content does not match the minExclusive facet. Signed integer content is not listed in the enumeration facet. Signed integer content does not match pattern facet. Signed integer content does not match in the totalDigits facet. Unsigned integer content does not match the maxInclusive facet. Unsigned integer content does not match the maxExclusive facet. Unsigned integer content does not match the minInclusive facet. Unsigned integer content does not match the minExclusive facet. Unsigned integer content is not listed in the enumeration facet. Unsigned integer content does not match pattern facet. Unsigned integer content does not match in the totalDigits facet. Double content does not match the maxInclusive facet. Double content does not match the maxExclusive facet. Double content does not match the minInclusive facet. Double content does not match the minExclusive facet. Double content is not listed in the enumeration facet. Double content does not match pattern facet. Decimal content does not match in the fractionDigits facet. Decimal content does not match in the totalDigits facet. Date time content does not match the maxInclusive facet. Date time content does not match the maxExclusive facet. Date time content does not match the minInclusive facet. Date time content does not match the minExclusive facet. Date time content is not listed in the enumeration facet. Date time content does not match pattern facet. Duration content does not match the maxInclusive facet. Duration content does not match the maxExclusive facet. Duration content does not match the minInclusive facet. Duration content does not match the minExclusive facet. Duration content is not listed in the enumeration facet. Duration content does not match pattern facet. Boolean content does not match pattern facet. Binary content does not match the length facet. Binary content does not match the minLength facet. Binary content does not match the maxLength facet. Binary content is not listed in the enumeration facet. Invalid QName content: %1. QName content is not listed in the enumeration facet. QName content does not match pattern facet. Notation content is not listed in the enumeration facet. List content does not match length facet. List content does not match minLength facet. List content does not match maxLength facet. List content is not listed in the enumeration facet. List content does not match pattern facet. Union content is not listed in the enumeration facet. Union content does not match pattern facet. Data of type %1 are not allowed to be empty. Element %1 is missing child element. There is one IDREF value with no corresponding ID: %1. Loaded schema file is invalid. %1 contains invalid data. xsi:schemaLocation namespace %1 has already appeared earlier in the instance document. xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute. No schema defined for validation. No definition for element %1 available. Specified type %1 is not known to the schema. Element %1 is not defined in this scope. Declaration for element %1 does not exist. Element %1 contains invalid content. Element %1 is declared as abstract. Element %1 is not nillable. Attribute %1 contains invalid data: %2 Element contains content although it is nillable. Fixed value constraint not allowed if element is nillable. Specified type %1 is not validly substitutable with element type %2. Complex type %1 is not allowed to be abstract. Element %1 contains not allowed attributes. Element %1 contains not allowed child element. Content of element %1 does not match its type definition: %2. Content of element %1 does not match defined value constraint. Element %1 contains not allowed child content. Element %1 contains not allowed text content. Element %1 cannot contain other elements, as it has fixed content. Element %1 is missing required attribute %2. Attribute %1 does not match the attribute wildcard. Declaration for attribute %1 does not exist. Element %1 contains two attributes of type %2. Attribute %1 contains invalid content. Element %1 contains unknown attribute %2. Content of attribute %1 does not match its type definition: %2. Content of attribute %1 does not match defined value constraint. Non-unique value found for constraint %1. Key constraint %1 contains absent fields. Key constraint %1 contains references nillable element %2. No referenced value found for key reference %1. More than one value found for field %1. Field %1 has no simple type. ID value '%1' is not unique. '%1' attribute contains invalid QName content: %2. empty zero or one exactly one one or more zero or more Required type is %1, but %2 was found. Promoting %1 to %2 may cause loss of precision. The focus is undefined. It's not possible to add attributes after any other kind of node. An attribute by name %1 has already been created. Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.