AudioWizard 0 0 757 640 Audio Tuning Wizard Introduction Welcome to the RetroShare Audio Wizard This is the audio tuning wizard for RetroShare. This will help you correctly set the input levels of your sound card, and also set the correct parameters for sound processing in Retroshare. true Qt::Vertical 20 291 Volume tuning Tuning microphone hardware volume to optimal settings. <p>Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a &quot;Microphone boost&quot; make sure it's checked. </p> <p>Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the green and orange but not the red zone while you speak. </p> true Talk normally, and adjust the slider below so that the bar moves into green when you talk, and doesn't go into the orange zone. true 1 32767 100 1000 Qt::Horizontal Qt::Vertical 20 552 Stop looping echo for this wizard Qt::Horizontal 40 20 Apply some high contrast optimizations for visually impaired users Use high contrast graphics Voice Activity Detection Letting RetroShare figure out when you're talking and when you're silent. This will help Retroshare figure out when you are talking. The first step is selecting which data value to use. true Push To Talk: todo shortcut 64 64 Voice Detection 0 Next you need to adjust the following slider. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech). true 1 32767 100 1000 Qt::Horizontal 1 32767 100 1000 Qt::Horizontal Qt::Vertical 20 40 Continuous transmission Finished Enjoy using RetroShare Congratulations. You should now be ready to enjoy a richer sound experience with Retroshare. true Qt::Vertical 20 267