AudioInput
0
0
1155
713
-
Audio Wizard
-
0
0
Transmission
-
&Transmit
qcbTransmit
-
When to transmit your speech
<b>This sets when speech should be transmitted.</b><br /><i>Continuous</i> - All the time<br /><i>Voice Activity</i> - When you are speaking clearly.<br /><i>Push To Talk</i> - When you hold down the hotkey set under <i>Shortcuts</i>.
-
2
-
DoublePush Time
qsDoublePush
-
If you press the PTT key twice in this time it will get locked.
<b>DoublePush Time</b><br />If you press the push-to-talk key twice during the configured interval of time it will be locked. RetroShare will keep transmitting until you hit the key once more to unlock PTT again.
1000
10
100
Qt::Horizontal
-
TextLabel
-
Qt::Vertical
20
40
-
Voice &Hold
qsTransmitHold
-
How long to keep transmitting after silence
<b>This selects how long after a perceived stop in speech transmission should continue.</b><br />Set this higher if your voice breaks up when you speak (seen by a rapidly blinking voice icon next to your name).
20
250
Qt::Horizontal
-
Silence Below
-
Signal values below this count as silence
<b>This sets the trigger values for voice detection.</b><br />Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below "Silence Below" always count as silence. Values above "Speech Above" always count as voice. Values in between will count as voice if you're already talking, but will not trigger a new detection.
1
32767
100
1000
Qt::Horizontal
-
Speech Above
-
Signal values above this count as voice
<b>This sets the trigger values for voice detection.</b><br />Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below "Silence Below" always count as silence. Values above "Speech Above" always count as voice. Values in between will count as voice if you're already talking, but will not trigger a new detection.
1
32767
100
1000
Qt::Horizontal
-
40
0
-
empty
-
-
Audio Processing
-
Noise Suppression
qsNoise
-
true
Noise suppression
<b>This sets the amount of noise suppression to apply.</b><br />The higher this value, the more aggressively stationary noise will be suppressed.
14
60
5
Qt::Horizontal
-
30
0
-
Amplification
qsAmp
-
Maximum amplification of input sound
<b>Maximum amplification of input.</b><br />RetroShare normalizes the input volume before compressing, and this sets how much it's allowed to amplify.<br />The actual level is continually updated based on your current speech pattern, but it will never go above the level specified here.<br />If the <i>Microphone loudness</i> level of the audio statistics hover around 100%, you probably want to set this to 2.0 or so, but if, like most people, you are unable to reach 100%, set this to something much higher.<br />Ideally, set it so <i>Microphone Loudness * Amplification Factor >= 100</i>, even when you're speaking really soft.<br /><br />Note that there is no harm in setting this to maximum, but RetroShare will start picking up other conversations if you leave it to auto-tune to that level.
19500
500
2000
Qt::Horizontal
-
30
0
-
Echo Cancellation Processing
false
-
Video Processing
-
170
128
QFrame::StyledPanel
QFrame::Raised
-
0
0
QFrame::StyledPanel
QFrame::Raised
-
Qt::Vertical
1
151
QVideoOutputDevice
QFrame
1
voipGraph
QFrame
1
qcbTransmit
qsDoublePush
qsTransmitHold
qsTransmitMin
qsTransmitMax
qsNoise
qsAmp