These split at 6672 -> 7075, so quite a bit merge.
libretroshare compiles - but untested.
retroshare-gui needs GenCertDialog.ui and IdEditDialog.ui to be properly merged. (compile errors).
some plugins will be broken.
retroshare-nogui is untested.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@7078 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* service->SendItem() now goes direct to pqistreamer buffer.
* split p3FastService out of p3Service.
p3FastService removes the recv buffer for faster processing.
p3Service maintains its original interface, so derivate classes can remain unchanged.
* Added uint32_t usec (wait period) to BinInterface.moretoread() & cansend() for future threading.
* Added Mutex protection to pqistreamer, pqissl and derivatives of both.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@6783 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Split the visState into seperate vs_disc and vs_dht for easier handling.
Split the heartbeat system into a separate service.
Added IPv4 and IPv6 local/ext addresses into discovery & peer config.
Fixed up samenet and samesubnet ipv4 calls.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@6773 b45a01b8-16f6-495d-af2f-9b41ad6348cc
In preparation for making RS support IPv6.
NB: This breaks the build of retroshare-gui, as the
sockaddr_storage_xxx fns are only defined as prototypes for now.
All the aux libraries like udp / stun / tcponudp / dht have still to be converted.
These changes will probably break various things and need to be tested thoroughly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@6735 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added DataRate accounting to Relay and Dht.
* Rates are exposed through rsDht.h interface.
* Added LastIncomingTS() to pqistreamer.
* Turned HeartBeat reset() into a warning.
* Added NoPacket in 60 sec reset().
* Minor typos/errors corrected.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4818 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Hid lots of DEBUG_BASIC behind #defines in pqissl.
- Added PeerID() in many places, so grep for a single peer.
- fixed linkMgr output so we can tell a FAILURE vs FAILED ATTEMPT
- reduced most logging to a single line.
- print out of errno in HumanText for SSL errors.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4814 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added LinkType to p3LinkMgr => exposed via rspeers.h
* Added ConnectionType to p3PeerMgr. This is dummy default to FRIEND at the moment.
* Flag bandwidth limited Relay links as such.
* Switched DNS Address connect to in front of historical addresses.
* Reverted Flags in p3LinkMgr to what they were.
* Added LinkType Flags to rspeers.h
* removed getConnectFlags() as it was a bad way to do things.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4769 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* log p3disc::sendHeartbeat(), successful p3linkmgr::connectAttempt()
* log reason for each pqissl::reset().
* log linkmgr & peermgr addFriend() and removeFriend().
* log pqiperson::connect(), p3PeerMgr::cleanUnusedLocations().
* Modify timing of cleanUnusedLocations (=>8min) & NETSTATE_PARAM_TIMEOUT (=>15min) (see if it has an effect).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4539 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Increased Timeout Periods for UDP connections - this was stopping half of them from succeeding.
* The other bug (Heartbeat / stream issues) has not been solved.
* Fixed up initialisation of p3BitDht data.
* add DropPeers() as NON-ACTIVE (this allows peers which aren't VISIBLE to still try and connect)
* export AddFriends/FOF/Others to LinkMgr to allow further SSL IDs to be added to p3BitDht.
* Export UDP Addresses to DhtWindow.
* switch off lots of debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4469 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Forgot that RELAY connections need extra parameters.
* Added proxyAddr, srcAddr and Bandwidth parameters to connection attempts.
* Completed UDP connection callouts from p3bitdht.
* Added TCP connection attempt initiation from p3bitdht.
* Added PASSIVE / ACTIVE determination in p3bitdht.
* completed UDP connection logic in pqissludp.
* enabled UDPSTUN_ALLOW_LOCALNET for testing.
* added CONSTs for TOU Receiver Indices.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4446 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added ConnectionFeedback fn to NetAssistConnect & p3BitDht.
* Added TYPE definitions to pqiassist.h
* added extra parameters to p3LinkMgr::connectAttempt() (flags which will be used to pass DIRECT/PROXY/DIRECT + PASSIVE/ACTIVE)
* Added callback from p3LinkMgr to NetMgr::netAssistStatusUpdate() => Dht::ConnectionFeedback.
* updated peerConnectRequest to trigger either TCP attempt (first) or UDP connection.
* updated parameters for p3LinkMgrIMPL::tryConnectUDP()
* added p3LinkMgrIMPL::locked_ConnectAttempt_SpecificAddress() for DHT => TCP attempt.
* added extra parameter to addAddressIfUnique... bool addFront => DHT attempts get pushed to front of Queue due to timing requirements.
* added extra parameter (flags) to pqiperson::connect() - matches extra parameters to p3LinkMgr::connectAttempt().
* added p3NetMgr::netAssistStatusUpdate()
* added mConnectFlags to pqissludp
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4443 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added OthersList to p3linkmgr. this is important so we can send ACTIONS for removed Peers.
* added missing mStatusChanged when adding Friend.
* added printPeerLists to PeerMgr and LinkMgr.
* tweaked debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4427 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added thread-safe rs_inet_ntoa function (util/rsnet.cc)
* Switched all calls to this function (most of the changes)
* Modified getLocalInterfaces() and getPreferredInterface() to avoid string conversions.
- NB: Modified windows functions too, but unable to test (hope it compiles!)
Also:
* Added EVP_CIPHER_CTX_rand_key() replacement function for old versions of SSL (pre 0.9.8) (for OSX 10.5)
- NB: This code should be reworked to remove these calls anyway.
* Updated tests/pqi to handle above changes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3281 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(Sorry for the ridiculously large check-in, wants to fix lots of stuff.)
Other Changes:
* Added SSL Test Harness. (authssltest)
* Added GPG Test Harness. (authssltest)
* Reworked SSL/GPG startup to enable test harnesses
* pqiperson: added notify of FAIL if connection method unavailable.
* added p3tunnel to pqissltunnel init.
* pqimonitor: added ipHistory to connect callback.
p3ConnectMgr Changes:
* removed STUN system - wasn't operating correctly anyway without DHT.
* switched to new IpAddress history data types. (removed lots of code)
* Added Addr history for both Local and Ext addresses.
* removed p3tunnel references in p3connmgr
* fixed up mUseTunnelConnection flags (now used!)
* fixed up mUseExtFinder flags (now used!)
* added improved Net Status.
* corrected UPNP / EXT / UDP startup. (was always UPNP).
* fixed netReset() and netStartup().
* removed unnecessary DEBUG code.
* added UPNP timeout code (600 secs - why does it take so long?)
* added improved netExtCheck().
* removed wierd netConsistencyCheck() ... to rework.
* corrected connect / reconnect code.
* removed DHT notify code.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3247 b45a01b8-16f6-495d-af2f-9b41ad6348cc
3068: added verification for file size computation (bug correction)
3069: set heartbeat values to intermediate values
3070: suppressed uninitialised memory read
3071: automatic removal of file lists from deleted peers, at restart (After
double check that this does not alter exchange of file lists in any way)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3072 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Redesign the udp connection
Remove the rsiface duplicates from retroshare-gui.
Add some randomness in timings for connect manager
Merge branch 'connectionTunneling'
Conflicts:
libretroshare/src/libretroshare.pro
libretroshare/src/pqi/p3connmgr.cc
retroshare-gui/src/RetroShare.pro
retroshare-gui/src/rsiface/rsfiles.h
retroshare-gui/src/rsiface/rstypes.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1867 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched off most of std::cerr output. (expect UPnP)
* moved pqi/pqidebug to util/rsdebug to allow greater usage.
* added Mutexes to logging.
* Downgraded many log messages to DEBUG.
* New Log messages for connections, dht and udp code.
* Added check for bad UDP socket.
* Added check for non-firewalled scenario.
* Increased Storage period from 1 Month to 6 Months for Links & Blog.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@644 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched to miniupnpc-1.0
* modified miniupnpc to add lease duration.
* set lease duration to 1 Hr.
* Modified configure scripts to use miniupnpc-1.0
* added TIMEOUT to all connections (5 sec for TCP - Important!)
* reduced TCP offset delay to 2 seconds.
* BUGFIX: Added missing connect_parameter wrapper function.
* added reset to other connection methods when connection is made.
* Added Connection Type (TCP/UDP) information to feedback/GUI
* Increased default Data Rates: from 50/50 to 100/500 kB/s
* Removed Default Bootstrap Ids. (only automatic now!)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* hashed keys are posted to specific DHT entries, to create a series of bootstrap lists.
* these are fetched as needed to bootstrap new clients.
* Modified Bootstrap monitor program.
Created a minimal backup bootstrap list (temporary)
Added "-e" option to commandline to force 'external port' mode
Bugfix for multiple connection methods, could kill an active connection.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@397 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Period and Delay parameters to connections.
- Delay is used to avoid simultaneous TCP connections.
- Period is used to regulate UDP connections.
* added Delay code to pqissl.
* added Period code to tcponudp / pqissludp.
* modified TTL modification code.
* increased SynPktRetransmit value.
* fixed retrans() timeout (one reason code wasn't working before!)
* fixed tou_close() SEGV bug.
* modified pqissludp tou_socket creation. (non permanent now).
* Modified format of peerConnectRequest() CB to make it more useful and rewrote function.
* Enabled pqissludp NetInterface.
* using Id comparision to determine Active/Passive UDP connection state.
* added #def to disable TCP connections. (for testing)
* enabled UDP connections from retryConnect() function.
* corrected EXT check in retryConnect() function.
* + lots of debug output and other stuff.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@358 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added new XPGP functions to checking certificates.
* Converted SSL classes from cert * -> p3AuthMgr.
* Added check of addresses before connect attempt.
* started up listener correctly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@319 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the pqi code,
and provides the majority of the improvements.
(1) Introduced new interfaces for DHT and UPnP abstraction: p3dhtmgr.h, p3upnpmgr.h
(2) Introduces abstraction for Authentication: p3authmgr.h
(3) New Connection Manager to coordinate networking code: p3connmgr.h
(4) New Configuration Manager: p3cfgmgr.h
This library has been significantly modified to support DHT synced connections
to enable connections between Firewalled Friends. The connection code has
been rewritten within a new framework, which should make extensions easier to code.
Also removed significant amount of old code relating to Tunnels, Channels etc.
This will be recycled later as higher level services that should not be
part of the core networking library.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@306 b45a01b8-16f6-495d-af2f-9b41ad6348cc
