These split at 6672 -> 7075, so quite a bit merge.
libretroshare compiles - but untested.
retroshare-gui needs GenCertDialog.ui and IdEditDialog.ui to be properly merged. (compile errors).
some plugins will be broken.
retroshare-nogui is untested.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@7078 b45a01b8-16f6-495d-af2f-9b41ad6348cc
In preparation for making RS support IPv6.
NB: This breaks the build of retroshare-gui, as the
sockaddr_storage_xxx fns are only defined as prototypes for now.
All the aux libraries like udp / stun / tcponudp / dht have still to be converted.
These changes will probably break various things and need to be tested thoroughly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@6735 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This brings a huge amount of goodness into the trunk,
but there is still a big chunk todo before it can be released.
* GXS Backend.
* GXS Services:
- Identities.
- Circles
- Photos
- Wiki
- GxsForums
- Posted.
* SSH no-gui server.
See branch commits for more info.
To switch on GXS stuff, enable CONFIG += gxs
in both libretroshare.pro and retroshare-gui.pro
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@5996 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Fixed retransmit algorithm. Much more closely matched to TCP standard: http://tools.ietf.org/html/rfc2988
- This increases retransmit timeouts, and reduces the number of packets resent.
- Added better debugging for retrans/close as separate #defines.
- Further testing is required ;)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@5252 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added -Wextra to the Windows compile.
Added new define in libbitdht for snprintf and fprintf to proper handling of "%ll" under Windows.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4951 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- This will only effect people who upgrade from a very old version.
- Other people will have to switch it on manually.
- Default is 0 friends, 1 FOF & 1 General @ 1kb/s... max 4kb/s usage per peer.
* Switched off lots of debugging.
* Bugfix for natassist (zeroconf returns 0.0.0.0:0 when its doesn't work).
* Logged IP Addresses for Failed incoming connections.
* Hacked IP address into the NewsFeed notifications (ugly).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4827 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added DataRate accounting to Relay and Dht.
* Rates are exposed through rsDht.h interface.
* Added LastIncomingTS() to pqistreamer.
* Turned HeartBeat reset() into a warning.
* Added NoPacket in 60 sec reset().
* Minor typos/errors corrected.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4818 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4795 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Disabled lots of debugging.
* Disabled LOCAL test mode in udpstunner, rsinit
* Enabled BadPeer checking in bitdht.
* Restored normal timeout periods for connection attempts.
* Restored normal connection levels for dht status.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4779 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Improved Relay Status Output & print when checkRelay() is called.
* initialise timer variable (mMinuteTS) - was causing checkRelay to never be called.
* switched to 10 second calling of checkRelay().
* Increased RELAY lifetimes (x2). now GENERAL = 1 hr, so they can at least transfer 1 meg (minimum block size)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4777 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Modified UdpRelay handles the counting...
now each Relay Class has a bandwidth limit,
and you can drop down to a lower class - if your one is full.
This ensures that the desired bandwidth is kept, and allows more friends to use the relays.
* Added Interface in p3bitdht.
TODO: Test this stuff!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4728 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added UdpStunner::dropStunPeer() code to remove bad peer from stun list.
* added calls to UdpStunner::dropStunPeer for BanLists going to/from DHT.
* added DEBUG_BANLIST_CONDENSE to remove unnecessary debug.
* Improved UdpStunner::status() print out of stunlist.
* Added extra check to throw away stun reports where remote_addr == reported ext_addr.
- This was causing peers to get the wrong IP addresses.
* Modified UdpStunner ExtAddr checks to make sure the IP addresses match.
* Changed BANLIST service Id to from Test ID to real ID.
NOTE: These are stop-gap methods to avoid the wrong Stun reports.
A more robust scheme must be implemented. I'd expect that it would
involve a strict initial check to establish your IP address...
(e.g. require 4 peers to confirm it, allowing for some fake entries)
After this we can have a weaker check ensuring IP address matches.
If we detect a likely REAL change of IP address - drop back to requiring
a strick check again.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4717 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added peerId to udpstunner->exclusiveMode for debugging purposes.
* added timeout for exclusive mode, this can happen if connection is lost at lower levels.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4489 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Reduce Maximum Transmission size from 1500 -> 1000.
This is the cause of Failed Connections. It looks like UDP packets are being truncated from 1520 -> 1492 bytes.
and this is killing the TCP protocol. Windows is the main suspect. UDP packets this large are liable to get fragmented anyway.
We will start at 1000, verify that connections are okay, then start increasing this parameter.
There is up to 64 bytes of Headers (IP + UDP + Relay + TOU), so 1400 + 64 = 1464 is below the 1492 cutoff. This is the target!
* Switch to RSRandom for Sequence numbers. rand() is rubbish on Windows.
* Added code to handle Larger Packets coming in (e.g. 1500 Bytes input, now that Max Size is 1000).
NB: The code is here needs to be optimised, there are excessive numbers of malloc(), new() & memcpy(), which should be removed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4482 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* switched off the TESTING PERIODS.
* added BASE PROXY wait time.
* Increased PEERNET_CONNECT_TIMEOUT to 120
* Prevented connection startup with Request underway (dpd->mPeerReqState == RSDHT_PEERREQ_RUNNING)
* corrected calculation of Exclusive Delay (Target of MIN_DETERMINISTIC_SWITCH_PERIOD = 60 secs).
* don't do UDP Failed ConnectLogic update when connection was initiated remotely.
* Extended UdpRelay to allow flexible Bandwidth limits in the future.
* Added Timeout for Relays (30min for unknowns - 2hrs for friends).
* Extract bandwidth from UdpRelay, at installation.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4463 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* changed PeerConnectStateBox::getNetState() to calcNetState() to provide up-to-date info (internal mNetState can be stale!)
* Added "bool addrChangeLikely" parameter to ReleaseProxyExclusiveLock() - this parameter is determined by whether we actually started a UDP connection.
* disabled ForceRestun in UdpStunner if addrChange is unlikely.
* Reduced Stunner Period Slow from 3 minutes to 2 minutes - exact value will only be known after real-world testing.
* More debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4458 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* tweaked time periods as these type of connections take longer.
* added NatHoleType() to ConnectStateBox logic - as its required for ProxyPort Determination.
* added ConnectStateBox::getNetState() so we can work out if in ExclusiveNat mode.
* added ExclusiveLock checks at Connection Initiation / Proxy Connection Auth & Connection Ends.
* added Simulation of Symmetric / Exclusive Nat to UdpStunner.
* exported ExclusiveProxyLock for GUI display.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4457 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Forgot that RELAY connections need extra parameters.
* Added proxyAddr, srcAddr and Bandwidth parameters to connection attempts.
* Completed UDP connection callouts from p3bitdht.
* Added TCP connection attempt initiation from p3bitdht.
* Added PASSIVE / ACTIVE determination in p3bitdht.
* completed UDP connection logic in pqissludp.
* enabled UDPSTUN_ALLOW_LOCALNET for testing.
* added CONSTs for TOU Receiver Indices.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4446 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added DETERMINISTIC_SYMMETRIC NAT to retroshare/rsconfig and NetStateBox.
* added ExclusiveMode to udpStunner.
* Tweaked UdpStunner ping logic.
* added TCP_WAIT to Connect Logic.
NB: This stuff is still to be tested!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4440 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added tick() and setRefreshPeriod() to pqiAddrAssist
* Fixed up NETSTATE #defines, all refer to retroshare/rsconfig.h
* added #define => string translations for NETSTATEs
* Added NetStateBox as an independent Network State determination (has no effect on existing code).
* added slowTick() to p3NetMgr.
* connected p3NetMgr::getNet... to NetStateBox.
* piped network state into NetStateBox.
* added p3NetMgr check for changes in NatType. (to update Stun Rate / Attach Mode (TODO))
* added NetStateBox.reset()
* tweaked lots of debugging.
* added Default Stun Period (pass -1 to setRefreshPeriod())
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4435 b45a01b8-16f6-495d-af2f-9b41ad6348cc
You can enable the debugging of the waiting time for a lock of RsMutex in rsthreads.h with
#define RSMUTEX_DEBUG 300
That means all locks waiting longer than 300ms are logged into the stderr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4392 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Major changes are:
* Improvements to tcponudp library to allow multiple UdpStacks / ports, with alternative recievers.
* Resurrected the UdpStunner code, and improved it.
* Added UdpRelay code.
* Modified startup code and ssludp code to use the new tcponudp and add a stunner.
* fixed buggy rs_inet_ntoa
* fixed a bunch of apple gcc warnings. mainly for(;;); => for(;;) ;
These changes shouldn't affect libretroshare stability... those changes will follow!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Enabled bitdht in RetroShare.pro and retroshare-nogui.pro too
Fixed link of RetroShare on Windows
-> added ws2_32 after bitdht, maybe someone has a better solution
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3335 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* OSX Bug: doesn't like classes in C files. switched to void * pointer.
* A little extra debugging in pqissl on disconnects.
* switched on bitdht by default in libretroshare.pro
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3334 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added thread-safe rs_inet_ntoa function (util/rsnet.cc)
* Switched all calls to this function (most of the changes)
* Modified getLocalInterfaces() and getPreferredInterface() to avoid string conversions.
- NB: Modified windows functions too, but unable to test (hope it compiles!)
Also:
* Added EVP_CIPHER_CTX_rand_key() replacement function for old versions of SSL (pre 0.9.8) (for OSX 10.5)
- NB: This code should be reworked to remove these calls anyway.
* Updated tests/pqi to handle above changes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3281 b45a01b8-16f6-495d-af2f-9b41ad6348cc
3099: libretroshare/src/tcponudp/udplayer.cc
libretroshare/src/tcponudp/udplayer.h
libretroshare/src/util/rsnet.cc
libretroshare/src/util/rsnet.h
moved operator<<(ostream&,sockaddr_in) to rsnet.h, as it is used at
different places
3100: libretroshare/src/util/rsdiscspace.cc
suppressed debug mode
3101: libretroshare/src/serialiser/rsdiscitems.cc
put correct (i.e. non conservative) size for RsDiscReply packets
3102: libretroshare/src/services/p3disc.cc
Made a pass on the code in p3disc. Corrected some bugs:
- suppressed an unwanted return in packet treatment
- prevented sending info to a peer about itself
- changed askInfoToAllPeers() such as not to discard info
from peers with NODISC flag (because we especially need
info for these)
- enabled receiving p3disc info even if p3discovery is
disabled. Indeed, disabeling p3disc is a measure of
protection, so it should limit the export of p3disc info,
not the import.
- removed test discarding info about dummy friends, because
it is useless
- don't discard info about peers that have the NODISC flag
(meaning that we especially need info for them)
- added safety check about received GPG keys. Before we
relied on this test being performed by
p3ConnMgr::addFriend()
- added some debug info
3103: libretroshare/src/ft/ftcontroller.cc
removed debug info
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3104 b45a01b8-16f6-495d-af2f-9b41ad6348cc
The problem was that libretroshare handles files in UTF-8 but Windows's ANSI/POSIX C functions automatically assume that the char* parameters are encoded with the system's code page. There is no way to set that code page as UTF-8. So now under Windows the code translates the file name to UTF-16 before feeding it to one of the Unicode functions (they are usually prefixed or suffixed by 'w'). Please note that it is not very efficient.
Furthermore, Windows does not provide a Unicode version of opendir/readdir/closedir, so it was necessary to use FindFirstFileW/FindNextFileW/FindClose which has a different behaviour as well as different structures. The FolderIterator class was created in order to mimic the Unix way of traversing folders contents. Hence the algorithm is unchanged and the systems differences masked.
As it was necessary to use some functions from the Windows API, <windows.h> had to be included in a few files were it didn't appear before, creating macros and #define conflicts. In order to solve them, util/rswin.h must be included first in a file (if necessary). Otherwise the preprocessor will fail on purpose to avoid the code being compiled with different _WIN32_WINNT values.
As another side-effect, rstlvutil.h and rstlvutil.cc have been removed from libretroshare.pro file. They are only used by testing units and include util/utest.h which defines a macro FAILED that already exists in <windows.h>. I don't know if unit tests are still in use and I don't plan on coding often on Windows, so I'll leave that as an exercise (hot potato?) to a motivated fellow Windows programmer.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2924 b45a01b8-16f6-495d-af2f-9b41ad6348cc
pqi/authgpg.cc:
- remove French comment (with nasty non-unicode characters)
- use std::cerr instead of fprintf
tcponudp/extaddrfinder.cc:
- initialize correctly the sockaddr_in, former code wouldn't pad sin_zero
(which is required by the standard)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2909 b45a01b8-16f6-495d-af2f-9b41ad6348cc
