- Temp fix for GXS services hang on dummy data generation. Given each GXS service own thread and chunked grp creation (separate thread may need to be permanent, no obvious around move grp gen cost away from critical path of tick, but unscientifically increases each services thread tick period to reduce cpu cost)
- change grpId assignment from hash of grp data to admin keyid
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5772 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Id & Wiki serialisers to constructors.
* Enabled cache_tick()... thought it doesn't process anything yet.
* Added debug to Id Key cache system.
* Fixed requests to match expected params.
* Added cachetest basics - this is not finished.
* Enabled generation of Lots of Dummy Ids - This demonstrates some queuing issues.
* Added #define to easily enable GxsId as only new service - for testing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5756 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added serialiser for wiki items (actual data to be finalised).
* Added wiki and fixed id services to be run properly.
* Disabled dummyData for ids.
* Fixed some bugs in Id serialiser.
* Added missing fns in p3wiki
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5748 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Removed V2 references: TokenQueueV2 and RsTokReqOptionsV2 are now TokenQueue and RsTokReqOptions and renamed file
Added initialisation of Posted back end service successfully
Added new msg status flags GXS_SERV::MSG_STATUS_UNPROCESSED and ::MSG_STATUS_UNREAD
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5707 b45a01b8-16f6-495d-af2f-9b41ad6348cc
removed VEG photoservice
Enabled group synchronisation between retroshare peers! test synchro between two rs peers worked.
Added crude commenting facility to photoshare, much tuning to be done
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5602 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* The Example services have been renamed eg. p3posted => p3postedVEG, to allow the real services to be added.
* The ServiceIDs have been shifted, to allow both VEG and GXS versions of services to run side-by-side for now.
* The DataTypes have not been renamed - but potentially should be in the future - if they cause clashes.
* Interface variables have also been renamed. eg. rsPosted => rsPostedVEG.
* This means that the GUI will not operate without changes too - TODO.
Minor changes to GXS services to better seperate them from the VEG versions.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5551 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- can add album (with thumbnail!)
- add photo (with photo!)
- can subscribe, but not added to ui yet
need to try some dummy msgs and bring up gxs_net
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5549 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- the user is asked at start wether to load or deny unregistered plugins, but can make it mind later in config->plugins
- added API and SVN numbers into required external plugin symbols
- user-defined plugin rules are dropped when a plugin changes (hash changes) or when the main executable changes.
- added new status flags (Plugin denied, missing API/SVN numbers)
- modified saveList()/loadList() to allow saving a list of rejected plugins as well.
- added methods in notifyBase and inherited classes to ask for plugin confirmation.
- adapted VOIP plugin to follow these new rules (API+SVN numbers). Other plugins should be adapted as well by addign the
missing symbols (RETROSHARE_PLUGIN_api and RETROSHARE_PLUGIN_revision).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@5529 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Reactivated Photodialog. almost completed integration, publishing and item storage working,
but data retrieval algorithm needs to be changed (request flags need to be translated, based on update call rather than client assumption)
fixed bug in rsgenexchange notification.
Added LGPL notices
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-gxs-b1@5387 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Revisions 4771 => 5334
* This merge brings a lot of unfinished code for GXS (new cache system)
- See branch commits for more details.
* Code is disabled, and should have minimal effect on trunk build.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@5338 b45a01b8-16f6-495d-af2f-9b41ad6348cc
User-level changes:
==================
- libgpgme is not used anymore; it is replaced by a built-in piece of code called OpenPGP-SDK
(http://openpgp.nominet.org.uk/cgi-bin/trac.cgi) that was improved to be used by RetroShare
for handling PGP keys.
- the gnupg keyring is not used anymore. Now, RetroShare has it's own gpg keyring, shared by all instances.
On linux it's located in ~/.retroshare/pgp/. A lock system prevents multiple locations to read/write keyrings
simultaneously.
- the trust database from gnupg is not documented, so RetroShare cannot import it. This comes from the fact that
the GPG standard (RFC4880) asks explicitly not to export trust information. So RetroShare has it's own
trust DB shared by locations. This means you need to re-trust people. Sorry for that!
- at start, if no keyring is found, RS will propose to copy the gnupg keyring to use your existing keys. Clicking on
"OK" will do the copy, and you should find back all existing locations, except for DSA keys.
- locations for which the suitable keypair is not in the keyring will not be displayed in the login window
- locations for which the suitable keypair is not a RSA/RSA key will not be displayed. RetroShare does not
support DSA/Elgamal keypairs yet.
- a key import/export exchange function has been added in the certificate creation window (you go there from the login
window by clicking on "manage keys/locations". This allows to easily create a new location with the same pgp key on
another computer. To obtain a suitable keypair using gnupg, you need to concatenate the encrypted private key and the
public key into an ascii file. This can be done using:
gpg -a --export-secret-keys [your ID] > mykey.asc
gpg -a --export [your ID] >> mykey.asc
- importing a key with subkeys in not yet possible. Please remove subkeys before importing.
- The code has been tested for a reasonnable amount of time, but it's not possible to prevent some new bugs
to appear. Please report them asap supplying: call-stacks if possible, and terminal output. In particular,
openpgp has some assert()'s that should not be triggered unless RetroShare is calling it in an improper way.
Internal changes
================
- a specific component, PGPHandler, takes care of the interface between openpgp-sdk and RetroShare
openpgp-sdk is c-code, with it's own memory management, which has been kept well separated from
RetroShare.
- GPG Ids are now a specific class (not a std::string anymore) for code consistency reasons. As strings are
still used in many places, this requires a few conversions. In particular, AuthGPG takes strings as
function params and calls GPGHandler with the proper PGPIdType class. In the future, RetroShare should
only use PGPIdType. The same will be done for SSL ids.
- signature cleaning is still handled by the Retroshare built-in function, not by openpgp, but we will
do this later.
Still to do
===========
- DSA needs subkey handling, since the encryption is performed by a Elgamal subkey. Not sure this will be done.
- GPGIds/SSLIds cleaning (meaning replace strings by appropriate types). Lots of confusion throughout the code in retroshare-gui in particular.
- key removal from keyring. This is a challenge to keep locations synchronised.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@5293 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added p3Posted service. This is a *better* Links Cloud, based on the new Cache system.
* Fixed p3GxsService retrival of Thread / Children messages. (for Forum support).
* Added Dummy Data for testing Forum integration.
* switched on both these services in libretroshare
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-new_cache_system@5268 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- p3bwctrl.h/.cc & rsbwctrlitems.h/.cc
- New Interface in pqihandler to extract the data.
- New Interface in rsconfig to display in GUI.
- Added extra debugging in pqistreamer for catching big outqueues.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@5241 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added missing check of file pointer in PGPHandler::decryptTextFromFile
- Added missing fclose of the ssl passphrase file in RsLoginHandler::getSSLPasswdFromGPGFile. Is this still needed, because PGPHandler::decryptTextFromFile does the same check?
- Fixed possible memory leak in ops_decrypt_memory.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-OpenPGP@5222 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Defined a generalised Group/Msg retrieval interface (RsTokenService), which is defined in rsidentity.h
- Defined MetaData for both Groups and Messages (not finalised yet).
- Implemented a general Data Backend for Local Testing of interface - inside p3gxsservice.cc
- Modified services to use this temporary backend.
- Added Wire and ForumV2 services.
Still lots to do:
- work out request options.
- finalise metadata.
- group permissions.
- identities
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-new_cache_system@5219 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Fixed crash after the second call to RsInit::InitRetroShare when keyring does not exist.
The instance of AuthSSL was created twice and AuthGPG was deleted without stopping the thread. Stopped the AuthGPG thread on exit of RetroShare.
- Added the correct path to the keyring for Windows in RsInit::copyGnuPGKeyrings.
- Changed the detection of the portable version on Windows from the file "gpg.exe" to the file "portable".
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-OpenPGP@5211 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* new classe p3zcNatAssist
* moved some common ZeroConf functions / definitions around.
* moved virtual tick() to parent class: pqiNetAssist
* added zcNetAssist section to makefiles. (active for OSX build)
* setup switch between p3zcNatAssist & upnphandler in rsinit.cc
NOTE: Still to test network restart, etc, and correct exchange of external Ip Address.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4800 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Merging Dht Relay improvements into the trunk. These changes should finally make relays functional.
There are still some service changes required to reduce the traffic over relays.
Summary of Changes
---------------------
* Changed the way proxy/relay peers are selected in bdConnection. (needs more work).
* Added LinkType to peer info in p3LinkMgr & rspeers.h interface.
* Added getConnectionType() to p3PeerMgr. This defaults to FRIEND for the moment.
* Provide information about Bandwidth, Transport and Peer Type via LinkType().
* Added RateCap() to limit traffic over Relay connections.
* Set Internal Rate to 75% of Relay Limit to account for transport overhead.
* Added various #include "util/rswin.h" to fix compile errors with standard ssl package.
* Removed Local variables (mConnectProxyAddr, etc) which were hiding Class Variables.
* Cleaned up bits in pqissl.cc and p3linkmgr.cc
* Increased UDP Relay Packet size (max transport of 1400 bytes per UDP packet)
* Modified checkRelay() to use Low Pass Filter to calculate Relay Bandwidth.
* Improved udprelay debugging.
* increased (x2) Relay Lifetimes - this is so that enough useful data can be transported (1meg).
* Added LOCALNET_TESTING code to rsinit.cc. This allows Port Restrictions to simulate firewalls.
* more debugging and minor bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Disabled lots of debugging.
* Disabled LOCAL test mode in udpstunner, rsinit
* Enabled BadPeer checking in bitdht.
* Restored normal timeout periods for connection attempts.
* Restored normal connection levels for dht status.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4779 b45a01b8-16f6-495d-af2f-9b41ad6348cc
NB: Reverse Most of these changes - before adding to Trunk!!!!
* Added missing BitDht callback functions for test/example code.
* Switch tests/example to OSX compile.
* DISABLE_BAD_PEER_FILTER (as it doesn't like local net)
* Reduced Minimum Peer Counts for DHT to be considered active.
* Added LOCALNET_TESTING to rsinit.cc
- new Commandline Option -R <lport-uport> to restrict UDP ports.
- Enables LocalNet in UdpStunner.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4756 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added Timeouts for Resolve and QueryIP, as these can continue indefinitely.
- Added more debugging.
- rotated port number using ntohs().
- Filtered Self.
- Allowed Other SSL IDs of Self to connect.
- Fixed QueryIP to use hosttarget instead of servicename.
- fixed Id order in mPeerMgr->addFriend().
- fixed p3ZeroConf initialisation call.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4752 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- registers oneself, browses and resolves services.
- Lots still TODO:
- parse TxtRecords.
- Track peers.
- feedback to libretroshare
- etc, etc.
Enabled ZeroConf in libretroshare.pro & rsinit.cc. Compiles and runs on OSX.
Added RelayHandler to Dht, to enable external control of Relays.
Marked pqiAssist Interface for changes... will be revamped with ZeroConf.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4727 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Fixed small hangs of RetroShare by removing the core lock in RsServer::ConfigGetDataRates. Is that needed?
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4725 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added p3BanList as a service.
* Added interfaces to communicate addresses.
* Added debug to p3BanList.
* Fixed several bugs in the AddEntry/Condense
* Fixed Mutex deadlocks.
Improvements to Dsdv code too.
* Added p3Dsdv as a service.
* Added Function to create a TEST service for routing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4687 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added missing Mutex protection in p3BitDht.
- Added p3BitDht::addKnownPeer() to communicate with libbitdht.
- Disabled placeholder versions (addFriend/AddFriendOfFriend)
- Added netAssistKnownPeer() libretroshare interface.
- Added calls to netAssistKnownPeer() from p3disc and p3NetMgr.
- Check for NULL ptr in p3NetMgr before calling p3PeerMgr.
- Added FIX to maintain MANUAL FORWARD port (untested!)
- Removed some compiler warnings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4681 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Now the history is saved encrypted. Please delete all files with "chat*.xml" in your profile folder.
Added new config p3HistoryMgr and interface p3History.
Added new option to limit the count of the saved history items.
Added new simple html optimizer "RsHtml::optimizeHtml" to reduce the size of the html strings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4623 b45a01b8-16f6-495d-af2f-9b41ad6348cc
It was using the same port as the DHT, and switching to a Random one, on its own.
* Added debugging for net reset.
* Added further debugging for ssl (reset + killing existing connections)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4530 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Measures Lag and Clock offset, by pinging peers periodically.
* added interface so the results can be plotted.
* added serialisers for ping/pong data types.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4519 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* set PortForward in NetStateBox when the Network has been setup.
* add GeneralConfig to rsConfig external interface.
* enabled ADVANCED configuration option.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4500 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Forgot that RELAY connections need extra parameters.
* Added proxyAddr, srcAddr and Bandwidth parameters to connection attempts.
* Completed UDP connection callouts from p3bitdht.
* Added TCP connection attempt initiation from p3bitdht.
* Added PASSIVE / ACTIVE determination in p3bitdht.
* completed UDP connection logic in pqissludp.
* enabled UDPSTUN_ALLOW_LOCALNET for testing.
* added CONSTs for TOU Receiver Indices.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4446 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Shifted real functionality to p3LinkMgrIMPL, p3NetMgrIMPL p3PeerMgrIMPL
This allows us to test most objects with dummy objects (i.e. no need for full AuthSSL/AuthGPG objects)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4441 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added retroshare/rsdht.h
* extended p3bitdht to provide RsDht interface. (p3bitdht_interface.cc)
* added UdpRelay to networking stack.
* started expansion of p3bitdht to handle connections.
* added <string> header to rsthreads.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4399 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added configuration saving for plugin manager and serialization methods
- added a list of accepted plugin hashes
- added plugin widget for each plugin in settings, to allow enabling/disabling plugins
- updated LinkCloud plugin to new rsPlugin class
- put the addconfiguration for plugin manager in rsinit.cc a bit earlier to allow to load
the list of accepted hashes early enough
- added icon for disabled plugins
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4393 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Major changes are:
* Improvements to tcponudp library to allow multiple UdpStacks / ports, with alternative recievers.
* Resurrected the UdpStunner code, and improved it.
* Added UdpRelay code.
* Modified startup code and ssludp code to use the new tcponudp and add a stunner.
* fixed buggy rs_inet_ntoa
* fixed a bunch of apple gcc warnings. mainly for(;;); => for(;;) ;
These changes shouldn't affect libretroshare stability... those changes will follow!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- ported LinksCloud to a new plugin, and removed it from main sources
Next moves:
- add gui for managing plugins
- handle windows compilation
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4275 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Removed extra "/" of the filename (e.g. "E://") of the hashed file when sharing a whole drive.
Recompile of the gui needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4200 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added new command line parameter "-r retroshare://..." for adding links to the registered running RetroShare.
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4156 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* switched to one universal PendingCache list.
* added mHistoricalCaches variable to p3distrib - to indicate when old caches have been loaded.
* added calls to p3GroupDistrib::HistoricalCachesDone() in rsinit.cc
* added "historical" parameter to lots of p3distrib functions.
* updated child classes to only add FeedItems if (historical == false).
* Switched Validate / Duplicate Msg checks to speed up historical data load.
* corrected rsrandom function for OSX.
* bugfix to rsloginhandler function. (compile error).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4008 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added a RsLoginHandler class, responsible for storing/loading the SSL passwd from keyrings/disk/gpg file
- Removed RsInitConfig::havePasswd, RsInitConfig::haveHelp, etc.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4007 b45a01b8-16f6-495d-af2f-9b41ad6348cc
