* log p3disc::sendHeartbeat(), successful p3linkmgr::connectAttempt()
* log reason for each pqissl::reset().
* log linkmgr & peermgr addFriend() and removeFriend().
* log pqiperson::connect(), p3PeerMgr::cleanUnusedLocations().
* Modify timing of cleanUnusedLocations (=>8min) & NETSTATE_PARAM_TIMEOUT (=>15min) (see if it has an effect).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4539 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* SSL_Peek is called on new connections, and we only accept it when there is data.
* This should stop some of the unstable connections caused by wrong IP:Ports
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4533 b45a01b8-16f6-495d-af2f-9b41ad6348cc
It was using the same port as the DHT, and switching to a Random one, on its own.
* Added debugging for net reset.
* Added further debugging for ssl (reset + killing existing connections)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4530 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* flipped RTT horizontal axis, and added "New" and "Old" Indicators.
* only consider visible points for maxRTT (vertical scale) of plot.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4526 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Measures Lag and Clock offset, by pinging peers periodically.
* added interface so the results can be plotted.
* added serialisers for ping/pong data types.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4519 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* extract external address from DhtStunner if possible.
* added p3PeerMgr::UpdateOwnAddress(), which should only be called by p3netmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4512 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched ServerPage to use netMode, rather than tryNetMode. This fixes the Network Status.
* Added "Advanced Mode" to Settings GeneralPage.
* Store / Set Advanced Mode via rsConfig::get/setConfigurationOptions.
* removed %0D%0A from Linux / OSX emails - made it Windows Only.
* updated GetStartedDialog text.
* updated Dht and Nat Indicators to accurately reflect Network status. Roughly:
- DHT. Off: gray, ERROR: red, NO RS PEERS: yellow, GOOD: green.
- NAT. Offline: gray, BAD NET: red, NO DHT, or FIREWALLED: yellow, GOOD: green
* disable GetStartedDialog is AdvancedMode is set.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4502 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* set PortForward in NetStateBox when the Network has been setup.
* add GeneralConfig to rsConfig external interface.
* enabled ADVANCED configuration option.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4500 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Re-written the text.
* Enabled buttons for "Invite Friends" and "Add Friend". Linked to Email Invite, and Connect Friend Wizard.
* Switched out FAQ for links to website, and email support buttons.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4499 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- p3peermgr now uses RS_NET_MODE_XXXX instead of RS_NET_MODE_TRY_XXXX
- p3netmgr maintains both TRY and ACTUAL mode.
- actual mode is not visible through old interface (TO FIX).
- added default to UPNP mode.
* Added debug to show changes to peer->VisState.
- It seems that this is never updated by p3disc. BUG, (TO FIX).
* disabled extra debug in rsdiscitems.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4498 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* print out messages when serialisation fails.
* removed BUG in TlvGetString() which allows a zero length TLV
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4496 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added peerId to udpstunner->exclusiveMode for debugging purposes.
* added timeout for exclusive mode, this can happen if connection is lost at lower levels.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4489 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Reduce Maximum Transmission size from 1500 -> 1000.
This is the cause of Failed Connections. It looks like UDP packets are being truncated from 1520 -> 1492 bytes.
and this is killing the TCP protocol. Windows is the main suspect. UDP packets this large are liable to get fragmented anyway.
We will start at 1000, verify that connections are okay, then start increasing this parameter.
There is up to 64 bytes of Headers (IP + UDP + Relay + TOU), so 1400 + 64 = 1464 is below the 1492 cutoff. This is the target!
* Switch to RSRandom for Sequence numbers. rand() is rubbish on Windows.
* Added code to handle Larger Packets coming in (e.g. 1500 Bytes input, now that Max Size is 1000).
NB: The code is here needs to be optimised, there are excessive numbers of malloc(), new() & memcpy(), which should be removed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4482 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added quick and dirty BitDht Packet check. test against "d1:" for the first 3 bytes. This should not conflict with Stun, Relay or TOU packets.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4480 b45a01b8-16f6-495d-af2f-9b41ad6348cc
