Shifted real functionality to p3LinkMgrIMPL, p3NetMgrIMPL p3PeerMgrIMPL
This allows us to test most objects with dummy objects (i.e. no need for full AuthSSL/AuthGPG objects)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4441 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added DETERMINISTIC_SYMMETRIC NAT to retroshare/rsconfig and NetStateBox.
* added ExclusiveMode to udpStunner.
* Tweaked UdpStunner ping logic.
* added TCP_WAIT to Connect Logic.
NB: This stuff is still to be tested!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4440 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added tick() and setRefreshPeriod() to pqiAddrAssist
* Fixed up NETSTATE #defines, all refer to retroshare/rsconfig.h
* added #define => string translations for NETSTATEs
* Added NetStateBox as an independent Network State determination (has no effect on existing code).
* added slowTick() to p3NetMgr.
* connected p3NetMgr::getNet... to NetStateBox.
* piped network state into NetStateBox.
* added p3NetMgr check for changes in NatType. (to update Stun Rate / Attach Mode (TODO))
* added NetStateBox.reset()
* tweaked lots of debugging.
* added Default Stun Period (pass -1 to setRefreshPeriod())
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4435 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added OthersList to p3linkmgr. this is important so we can send ACTIONS for removed Peers.
* added missing mStatusChanged when adding Friend.
* added printPeerLists to PeerMgr and LinkMgr.
* tweaked debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4427 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Catch Failed Connections, and add to NewsFeed for GUI notifications.
* outgoing connections are captured via pqissl::FailedCertificate() functions.
* incoming connections are captured at certificate verification.
* Certs are passed to AuthSSL, which calls the notification system.
* Additional types have been added to rsnotify to handle these cases.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4425 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* switched off lots of debugging, and removed "common" messages, so we can focus on the actions.
* Added extra debugging focused on the connections.
* Removed "lastconnect" from p3LinkMgr.
* added p3PeerMgr::updateLastConnect() fn, so this parameter will be stored.
* added calls from p3LinkMgr at connect and disconnect.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4424 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Split p3bitdht_peers.cc debugging in two. Hid Id Translation debug (that code is fine)
* Added initialisation of p3bitdht peer data structure (using values from peernet).
* Added BITDHT_QFLAGS_UPDATES flag.
* Added Tick() interface to NetAssistConnect interface, tick it from p3NetMgr.
* FIXED OLD BUG: netAssistFriend was not being called from p3LinkMgr::connectResult() this meant all peers where being searched for.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Improved debugging messages for p3linkmgr & p3netmgr, switched on debugging.
* added ids to p3bitdht peers.
* added datatypes to RsDht peers data structure, and translate the data.
* add const to PeerConnectStateBox::connectState().
* cleaned up p3LinkMgr::locked_ConnectAttempt_AddDynDNS() a bit.
* filled in friend data types in p3LinkMgr (allows connections now!)
* added printConnectState() in p3LinkMgr
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4421 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added configuration saving for plugin manager and serialization methods
- added a list of accepted plugin hashes
- added plugin widget for each plugin in settings, to allow enabling/disabling plugins
- updated LinkCloud plugin to new rsPlugin class
- put the addconfiguration for plugin manager in rsinit.cc a bit earlier to allow to load
the list of accepted hashes early enough
- added icon for disabled plugins
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4393 b45a01b8-16f6-495d-af2f-9b41ad6348cc
You can enable the debugging of the waiting time for a lock of RsMutex in rsthreads.h with
#define RSMUTEX_DEBUG 300
That means all locks waiting longer than 300ms are logged into the stderr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4392 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Major changes are:
* Improvements to tcponudp library to allow multiple UdpStacks / ports, with alternative recievers.
* Resurrected the UdpStunner code, and improved it.
* Added UdpRelay code.
* Modified startup code and ssludp code to use the new tcponudp and add a stunner.
* fixed buggy rs_inet_ntoa
* fixed a bunch of apple gcc warnings. mainly for(;;); => for(;;) ;
These changes shouldn't affect libretroshare stability... those changes will follow!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- ported LinksCloud to a new plugin, and removed it from main sources
Next moves:
- add gui for managing plugins
- handle windows compilation
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4275 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Removed extra "/" of the filename (e.g. "E://") of the hashed file when sharing a whole drive.
Recompile of the gui needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4200 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added new button in ConnectFriendWizard for cleaning the certificate.
Fixed cleaning:
- added blank line after the armor header
- moved the checksum to a new line
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4134 b45a01b8-16f6-495d-af2f-9b41ad6348cc
so RS ended up with 200+ zombie child processes. This prevented gpg from being called.
The fix was to add waitpid() calls to cleanup the zombies.
* added cleanupZombies() to authgpg.cc (OSX only).
* updated OSX gpgme libraries to 1.3.0 (added libassuan to RetroShare.pro).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3974 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- authssl would call OPENSSL_malloc without OPENSSL_free
- pqistore was not deleting items in pqiSSLStore when BIN_FLAGS_NO_DELETE is not here
- rsdir/rsinit were calling opendir withoug closedir (which might eat FDs, in addition)
- udplayer was not freeing it's 16KB buffer at end of loop.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3948 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Changed the usage of RsPeerDetails.validLvl to RsPeerDetails.trustLvl for the display in the column "Did I authenticated peer" in NetworkDialog.
Added an icon to the MessageBox of the NotifySysMessage.
Fixed german language.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3926 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* shifted dht stats call outside of p3connmgr's mtx.
NB: As Dht callback functions hold DHT lock, then lock p3ConnectMgr...
we cannot have any opposite locks (p3connmgr, then DHT) or we have
potential for a deadlock.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3861 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* new uniform #define DEBUG_TRANSFERS to switch on packet timings.
* switched off by default.
* enabled BinData printing again.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3785 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* print packet size and time - when actually sending it.
* print reason for stopping to read or send packets.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Reload all gpg keys in AuthGPGimpl::LoadCertificateFromString, when new signatures are added - not only the key was imported.
Changed parameters of RsPeers and AuthGPG from "std::string" to "const std::string&"
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3753 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Plumbed stats through the the retroshare interface.
* Also changed Channel store period back to 10 minutes.... (Reduce overall file count).
This must be done some time before the any changes are made to Channels periods.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3721 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- FAIL if too old.
- FAIL if invalid address.
- FAIL if on BannedIpList (=1.0.0.0)
- ACCEPT if extAddress.
- ACCEPT if !extAddress && sameNet(localAddr).
- FAIL all the rest.
* Test Results are printed if CONN_DEBUG is switched on.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3705 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Problem:
RetroShare connects to all ssl's at once. In Windows XP there is a build-in connection limit of concurrent incomplete connections.
Quote:
"The TCP/IP stack in Windows XP with Service Pack 2 (SP2) installed limits the number of concurrent, incomplete outbound TCP connection attempts. When the limit is reached, subsequent connection attempts are put in a queue and resolved at a fixed rate so that there are only a limited number of connections in the incomplete state."
This results in a high usage of the nonepaged pool and when it runs over the limit it results in the following error in the system log:
German: "TCP/IP hat das Sicherheitslimit erreicht, das für die Anzahl gleichzeitiger TCP-Verbindungsversuche festgelegt wurde."
English: "TCP/IP has reached the security limit imposed on the number of concurrent (incomplete) TCP connect attempts."
After a longer runtime of RetroShare and a very high usage of the nonepaged pool all connections of all running programs are lost and no new connections can be made. At the end it can cause a blue screen.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3631 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* NOTE about how to correctly implement Peer filtering.
* added peerConnectRequest() when PeerCallback(success) happens... starts UDP connection.
* Split the p3conmgr::tryConnect() functions into sub functions.
* added p3ConnMgr functions for UDP connections.
* Added AddifUnique(conect_address), to ConnMgr, this should reduce the number of connection attempts, by removing dups.
* Disabled bitdht in libretroshare.pro for the moment.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3605 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added second mutex for the gpg engine.
Now the call to the gpg engine (for example AuthGPGimpl::LoadCertificateFromString) doesn't block the GUI.
The existing problem is still the call of AuthGPGimpl::storeAllKeys every minute before access the gpg data.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3555 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added "mStatusChanged = true" on disconnect of a peer - the statusChange was not notified in time
MessengerWindow
- removed unused method updatePeersAvatar
Changes in status service:
- removed unused method statusAvailable
- new notifier for status change
- enabled the tick for receiving items
- always up to date status map
- no huge memory usage, if no list is visible who call getStatus and processed the received items
- send notify on status change
- renamed getStatus to getStatusList and created a new method getStatus to get status of one peer
- fixed: send status directly after the connect of a peer
Now the frame around the avatar in private chat changes when the peer change the state.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3380 b45a01b8-16f6-495d-af2f-9b41ad6348cc
libretroshare/src/retroshare/
All the relevant headers have been modified to reflect that change.
This allows installation of libretroshare on a system, headers will
be put in $WHEREVER/retroshare/ and we keep the ability to compile
against them, be it on the system or in the SVN tree.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3342 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* OSX Bug: doesn't like classes in C files. switched to void * pointer.
* A little extra debugging in pqissl on disconnects.
* switched on bitdht by default in libretroshare.pro
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3334 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- replaced the findItems() call into a hand-written search (this was causing a rare bug in displaying downloads)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3318 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added TS check to SSL_RETURN_ZERO code.
- Existing code was dependent on tick rate. (could kill connection in 2-3 seconds)
- If nothing is received within 15 seconds - the connection will be killed.
* Removed "No send if RETURN_ZERO" check.
- This causes deadlocks and kills connections.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3287 b45a01b8-16f6-495d-af2f-9b41ad6348cc
sslfns.h: test for existing function with #ifdef doesn't work, used OPENSSL_VERSION_NUMBER instead - please test
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3284 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added thread-safe rs_inet_ntoa function (util/rsnet.cc)
* Switched all calls to this function (most of the changes)
* Modified getLocalInterfaces() and getPreferredInterface() to avoid string conversions.
- NB: Modified windows functions too, but unable to test (hope it compiles!)
Also:
* Added EVP_CIPHER_CTX_rand_key() replacement function for old versions of SSL (pre 0.9.8) (for OSX 10.5)
- NB: This code should be reworked to remove these calls anyway.
* Updated tests/pqi to handle above changes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3281 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Changed calls from AuthSSL to AuthGPG and tested. looks like it works!
* added extra connect addresses in p3connmgr (current[local/server]addr)
* added mConnMgr->addFriend() call to pqissllistener to add unknown ssl certs.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3253 b45a01b8-16f6-495d-af2f-9b41ad6348cc
