With this commit IPv6-v3 surpass v0.6-IPv6-2 in term of features
obsoleting it.
p3BitDht handle gracefully unwanted non IPv4 addresses
rsUdpStack handle gracefully unwanted non IPv4 addresses
pqissludp handle gracefully unwanted non IPv4 addresses
Move single address limitation workaround from
p3discovery2::sendOwnContactInfo to better
place p3PeerMgrIMPL::UpdateOwnAddress this way local address list is
queried less often and only id there is some suggestion that it may
have changed (probably ir will not be called all the times there is a
changes in local network interfaces but is good enough)
Implement crossplatform rs_setsockopt to avoid too much ifdef around
Implement sockaddr_storage_copy to safely copy sockaddr_storage objects
Changed unix_connect signature to be more comfortable for dual stack
usage
Remove dead code in pqissl::pqissl(...)
Adapt p3I2pBob::connectI2P() to new unix_connect
Adapt extaddrfinder to new unix_connect
Add sockaddr_storage_ipv4_to_ipv6 to convert from flat IPv4 to IPv4
mapped as IPv6
- create Timeout Fn so it can be called by classes derived from pqissl.
- set HIDDEN timeout to 30 seconds.
- add reset_locked() calls on errors in pqisslproxy.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@7039 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* service->SendItem() now goes direct to pqistreamer buffer.
* split p3FastService out of p3Service.
p3FastService removes the recv buffer for faster processing.
p3Service maintains its original interface, so derivate classes can remain unchanged.
* Added uint32_t usec (wait period) to BinInterface.moretoread() & cansend() for future threading.
* Added Mutex protection to pqistreamer, pqissl and derivatives of both.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@6783 b45a01b8-16f6-495d-af2f-9b41ad6348cc
In preparation for making RS support IPv6.
NB: This breaks the build of retroshare-gui, as the
sockaddr_storage_xxx fns are only defined as prototypes for now.
All the aux libraries like udp / stun / tcponudp / dht have still to be converted.
These changes will probably break various things and need to be tested thoroughly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.6-initdev@6735 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added LinkType to p3LinkMgr => exposed via rspeers.h
* Added ConnectionType to p3PeerMgr. This is dummy default to FRIEND at the moment.
* Flag bandwidth limited Relay links as such.
* Switched DNS Address connect to in front of historical addresses.
* Reverted Flags in p3LinkMgr to what they were.
* Added LinkType Flags to rspeers.h
* removed getConnectFlags() as it was a bad way to do things.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4769 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Adding more detailed flags to each connection.
* Cleaned up unneeded stuff from p3LinkMgr.
* Added rswin.h includes before openssl - allows compilation using std Win OpenSSL.
* Added getConnectFlags() to Net Base.
* removed net_attempt and associated obsolete variables from pqissl
* Made NetBinInterface protected in pqiperson (is this okay?)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4767 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added TS check to SSL_RETURN_ZERO code.
- Existing code was dependent on tick rate. (could kill connection in 2-3 seconds)
- If nothing is received within 15 seconds - the connection will be killed.
* Removed "No send if RETURN_ZERO" check.
- This causes deadlocks and kills connections.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3287 b45a01b8-16f6-495d-af2f-9b41ad6348cc
so I can properly document what is being changed!
Revert / Merge : pqissl / pqissludp code.
* restored original timeout system.
* removed weird testing code - should never have been here!
* switched extra checks to generate ALERT msgs - we want to know if they happen.
* removed quietShutdown (breaks TLS protocol - why was this added?)
* switched listening on all the time. (helps restore disconnects).
* restored common connect parameters (removed duplicates in ssludp).
* restored AuthSSL->Failed/CheckCertificate() calls ... useful.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3212 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This is not enabled by default. Instructions to enable are at the end of msg.
This is 60% complete. Supports creation of certificates, adding friends and connections.
Parts still to do: pgpids, p3discovery, signing and trusting peers.
The main reason it is being commited is so that connections between peers can be
properly tested, and development on OSX and win can start.
This requires gpg and the gpgme.h development libraries, and no longer
requires the custom ssl libraries.
To compile it switch the configuration flags in scripts/config-linux.mk
To compile XPGP (v0.4.x) enable PQI_USE_XPGP:
#PQI_USE_SSLONLY = 1
PQI_USE_XPGP = 1
To compile SSL only, enable PQI_USE_SSLONLY:
PQI_USE_SSLONLY = 1
#PQI_USE_XPGP = 1
To compile OpenPGP, disable both:
#PQI_USE_SSLONLY = 1
#PQI_USE_XPGP = 1
and enable RS_USEPGPSSL in rsiface/rsinit.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1265 b45a01b8-16f6-495d-af2f-9b41ad6348cc
build against a standard OpenSSL library...
Still lots to do (implement AuthSSL), compiles all but final gui.
use USE_XPGP flag in build script to control it.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@796 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched p3Ranking to share Friends Links as well as own.
* Modified rankmsgs to contain source id.
* Fixed up rsNotify, added pqiNotify and global function call to get it.
* Added notify for Bad Incoming Directory
* Added Emergency Incoming directory so RS can keep running.
* Added notify for Bad Packet (connecting to V0.3.X)
* Added notify for Incomplete Packet Read (not been triggered yet!)
* added close() to BinInterface, close on pqissl calls reset()
* removed exit(1) calls from pqistreamer, replaced with bio->close().
* Increased Maximum Packet Size for HTML messages.
* Fixed Online/Offline Message Forwarding. (TEST).
* Increased DHT bootstrap buckets to 4.
* Cleaned up much of serialiser debug (was slowing down Mac)
* Added directory path to File Listings.
* added ConvertSharedFilePath() so correct local dir can be found.
* Added ForceDirectoryCheck() and InDirectoryCheck() for file hashing.
* removed old TMP cache loading.
* switched off Cache debug.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@448 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched to miniupnpc-1.0
* modified miniupnpc to add lease duration.
* set lease duration to 1 Hr.
* Modified configure scripts to use miniupnpc-1.0
* added TIMEOUT to all connections (5 sec for TCP - Important!)
* reduced TCP offset delay to 2 seconds.
* BUGFIX: Added missing connect_parameter wrapper function.
* added reset to other connection methods when connection is made.
* Added Connection Type (TCP/UDP) information to feedback/GUI
* Increased default Data Rates: from 50/50 to 100/500 kB/s
* Removed Default Bootstrap Ids. (only automatic now!)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Period and Delay parameters to connections.
- Delay is used to avoid simultaneous TCP connections.
- Period is used to regulate UDP connections.
* added Delay code to pqissl.
* added Period code to tcponudp / pqissludp.
* modified TTL modification code.
* increased SynPktRetransmit value.
* fixed retrans() timeout (one reason code wasn't working before!)
* fixed tou_close() SEGV bug.
* modified pqissludp tou_socket creation. (non permanent now).
* Modified format of peerConnectRequest() CB to make it more useful and rewrote function.
* Enabled pqissludp NetInterface.
* using Id comparision to determine Active/Passive UDP connection state.
* added #def to disable TCP connections. (for testing)
* enabled UDP connections from retryConnect() function.
* corrected EXT check in retryConnect() function.
* + lots of debug output and other stuff.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@358 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added new XPGP functions to checking certificates.
* Converted SSL classes from cert * -> p3AuthMgr.
* Added check of addresses before connect attempt.
* started up listener correctly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@319 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the pqi code,
and provides the majority of the improvements.
(1) Introduced new interfaces for DHT and UPnP abstraction: p3dhtmgr.h, p3upnpmgr.h
(2) Introduces abstraction for Authentication: p3authmgr.h
(3) New Connection Manager to coordinate networking code: p3connmgr.h
(4) New Configuration Manager: p3cfgmgr.h
This library has been significantly modified to support DHT synced connections
to enable connections between Firewalled Friends. The connection code has
been rewritten within a new framework, which should make extensions easier to code.
Also removed significant amount of old code relating to Tunnels, Channels etc.
This will be recycled later as higher level services that should not be
part of the core networking library.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@306 b45a01b8-16f6-495d-af2f-9b41ad6348cc
