Added -Wextra to the Windows compile.
Added new define in libbitdht for snprintf and fprintf to proper handling of "%ll" under Windows.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4951 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added check for RS_NET_MODE_EXT instead of RS_NET_MODE_TRY_EXT... as trys aren't used in p3PeerMgr.
- removed tryMode from external interface - as this data is not available anymore.
- Removed setting this parameter in p3peers.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4919 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added checkbox in ConfCertDialog to allow adding/removing signatures
- enabled again key signature button in friend wizard
- RS cert links now use small keys.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4836 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- This will only effect people who upgrade from a very old version.
- Other people will have to switch it on manually.
- Default is 0 friends, 1 FOF & 1 General @ 1kb/s... max 4kb/s usage per peer.
* Switched off lots of debugging.
* Bugfix for natassist (zeroconf returns 0.0.0.0:0 when its doesn't work).
* Logged IP Addresses for Failed incoming connections.
* Hacked IP address into the NewsFeed notifications (ugly).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4827 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added limit of 10kB for Certificate size. If it is bigger - discard certificate.
* Remove certificates for slow / trickle connections (for Relay connections).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4822 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Certificate transmission will be disabled until we have worked out how to export Minimal Certs.
* Disabled check for gpgcert text in p3disc.
* Disabled creation of GPG Cert in AuthGPG.
* Added extra error code to pqinetwork.
This change will mean that friends of friends certificates will no-longer be shared if you have discovery on.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4821 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added DataRate accounting to Relay and Dht.
* Rates are exposed through rsDht.h interface.
* Added LastIncomingTS() to pqistreamer.
* Turned HeartBeat reset() into a warning.
* Added NoPacket in 60 sec reset().
* Minor typos/errors corrected.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4818 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Hid lots of DEBUG_BASIC behind #defines in pqissl.
- Added PeerID() in many places, so grep for a single peer.
- fixed linkMgr output so we can tell a FAILURE vs FAILED ATTEMPT
- reduced most logging to a single line.
- print out of errno in HumanText for SSL errors.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4814 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* new classe p3zcNatAssist
* moved some common ZeroConf functions / definitions around.
* moved virtual tick() to parent class: pqiNetAssist
* added zcNetAssist section to makefiles. (active for OSX build)
* setup switch between p3zcNatAssist & upnphandler in rsinit.cc
NOTE: Still to test network restart, etc, and correct exchange of external Ip Address.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4800 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Changes to support Relays.
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
* Added NumQueryNodes() function to bdDhtFunctions.
* Switched bdquery.cc to use bdNumQueryNodes().
* Extended bdStdDht class to bdModDht to allow NodesPerBucket to be modified.
* Fixed up Connection Fail Callback for Relay Servers.
* Added Extra debugging for Proxy Connections.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4796 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4795 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Merging Dht Relay improvements into the trunk. These changes should finally make relays functional.
There are still some service changes required to reduce the traffic over relays.
Summary of Changes
---------------------
* Changed the way proxy/relay peers are selected in bdConnection. (needs more work).
* Added LinkType to peer info in p3LinkMgr & rspeers.h interface.
* Added getConnectionType() to p3PeerMgr. This defaults to FRIEND for the moment.
* Provide information about Bandwidth, Transport and Peer Type via LinkType().
* Added RateCap() to limit traffic over Relay connections.
* Set Internal Rate to 75% of Relay Limit to account for transport overhead.
* Added various #include "util/rswin.h" to fix compile errors with standard ssl package.
* Removed Local variables (mConnectProxyAddr, etc) which were hiding Class Variables.
* Cleaned up bits in pqissl.cc and p3linkmgr.cc
* Increased UDP Relay Packet size (max transport of 1400 bytes per UDP packet)
* Modified checkRelay() to use Low Pass Filter to calculate Relay Bandwidth.
* Improved udprelay debugging.
* increased (x2) Relay Lifetimes - this is so that enough useful data can be transported (1meg).
* Added LOCALNET_TESTING code to rsinit.cc. This allows Port Restrictions to simulate firewalls.
* more debugging and minor bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
of the overhead associated with TCP and Relay connections:
* The Internal rate is calculated based on transmitted data (a reliable stream).
* The Relay rate is calculated at UDP packet level and is x1.1 - x1.2 higher than internal rate.
The Relay will drop the connection if peers exceed specified level - so best to leave some head room.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4773 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added LinkType to p3LinkMgr => exposed via rspeers.h
* Added ConnectionType to p3PeerMgr. This is dummy default to FRIEND at the moment.
* Flag bandwidth limited Relay links as such.
* Switched DNS Address connect to in front of historical addresses.
* Reverted Flags in p3LinkMgr to what they were.
* Added LinkType Flags to rspeers.h
* removed getConnectFlags() as it was a bad way to do things.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4769 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Adding more detailed flags to each connection.
* Cleaned up unneeded stuff from p3LinkMgr.
* Added rswin.h includes before openssl - allows compilation using std Win OpenSSL.
* Added getConnectFlags() to Net Base.
* removed net_attempt and associated obsolete variables from pqissl
* Made NetBinInterface protected in pqiperson (is this okay?)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4767 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- registers oneself, browses and resolves services.
- Lots still TODO:
- parse TxtRecords.
- Track peers.
- feedback to libretroshare
- etc, etc.
Enabled ZeroConf in libretroshare.pro & rsinit.cc. Compiles and runs on OSX.
Added RelayHandler to Dht, to enable external control of Relays.
Marked pqiAssist Interface for changes... will be revamped with ZeroConf.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4727 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Fixed small hangs of RetroShare by removing the core lock in RsServer::ConfigGetDataRates. Is that needed?
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4725 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Summary Of Changes:
* Reduced Default DHT Message rate from (50msg/sec) => (5msg/sec)
- Searches now take longer, but it should make crappy firewalls happy.
* Added Interface to allow this rate to be dynamically changed.
* Bugfixes for p3BanList: removed internal IPs from Lists, fixed AddBanPeer() logic bug.
* Disabled p3Dsdv, after brief test.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4705 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Full Changes can be extracted from logs associated with the following checkins:
r4674 r4678 r4679 r4680 r4681 r4684 r4686 r4687 r4697 r4698 r4699
Summary of changes:
DHT Improvements:
Added knowledge of Friends / FoFs and Relays to DHT.
Added bdFriendList class to store this information.
Added Checks against known Peer:IP information to detect bad peers.
Bad Peer Checking is in Test Mode Only for the moment,
New Interfaces to exchange above information with libretroshare
Cleaned up various compiler warnings.
libretroshare Improvements:
Added p3BanList Service and DataTypes to exchange Bad Peer information.
Added Plumbing to get info from network to DHT and back.
Supply Friend List from p3LinkMgr
Supply Friend of Friend List from p3Disc.
Added p3Dsdv Service and DataTypes for NetworkWide Routing (Testing Mode).
Various BugFixes.
Patch Manual Forward mode to preserve user selected Port.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4700 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added p3BanList as a service.
* Added interfaces to communicate addresses.
* Added debug to p3BanList.
* Fixed several bugs in the AddEntry/Condense
* Fixed Mutex deadlocks.
Improvements to Dsdv code too.
* Added p3Dsdv as a service.
* Added Function to create a TEST service for routing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4687 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added missing Mutex protection in p3BitDht.
- Added p3BitDht::addKnownPeer() to communicate with libbitdht.
- Disabled placeholder versions (addFriend/AddFriendOfFriend)
- Added netAssistKnownPeer() libretroshare interface.
- Added calls to netAssistKnownPeer() from p3disc and p3NetMgr.
- Check for NULL ptr in p3NetMgr before calling p3PeerMgr.
- Added FIX to maintain MANUAL FORWARD port (untested!)
- Removed some compiler warnings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4681 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Now the history is saved encrypted. Please delete all files with "chat*.xml" in your profile folder.
Added new config p3HistoryMgr and interface p3History.
Added new option to limit the count of the saved history items.
Added new simple html optimizer "RsHtml::optimizeHtml" to reduce the size of the html strings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4623 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added new buttons to SecurityItem to add/remove the peer and view peer details.
Added new call to notifyListChange with NOTIFY_LIST_FRIENDS in AuthGPGimpl::AllowConnection.
Fixed german language.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4572 b45a01b8-16f6-495d-af2f-9b41ad6348cc
I've reduced the frequency, and increased the age for removal.
* Cleared every 31 minutes, first cleaning after 1 hour.
* old peer is no contact for 90 days.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4547 b45a01b8-16f6-495d-af2f-9b41ad6348cc
=> Giving new peers a chance to connect.
* Fixed missing return in p3PeerMgr::removeUnusedLocations()
* moved RTT defines to top of file, and increased to 150 results.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4546 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the periodical call of cleanupUsedLocation, which was reloading all the GPG Keys - for each cleanup Key.
This required cleaning up various bits (AuthGPG, rsPeers, p3Disc).
* moved rsPeer::cleanUnusedLocations => p3PeerMgr::removeUnusedLocations();
- made the function light-weight, no loading of GPG Keys.
* moved getSSLCertsFromGPG() fn from rsPeers => p3PeerMgr
* added p3PeerMgr::removeAllFriendLocations() to cleanup when removing a GPG Friend.
* cleaned up rsPeers, made addFriend() / removeFriend() universal functions.
* remove bool p3Peers::setAcceptToConnectGPGCertificate(const std::string &gpg_id, bool acceptance)
* removed all Dummy SSL Ids. - There is no need for this!
* Major changes to p3disc to correct FLAWED logic. (needs more testing).
* removed as many dependancies on retroshare/rspeer.h as possible.
* changed p3turtle dependancy on rsPeers ==> mLinkMgr.
* added p3LinkMgr::getPeerName() and p3PeerMgr::getPeerName()
* added return 1 to pqissllistener::closeConnection().
* removed unused code from AuthGPG().
* removed storeAllKeys() calls in AuthGPG::AllowConnection().
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4542 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* log p3disc::sendHeartbeat(), successful p3linkmgr::connectAttempt()
* log reason for each pqissl::reset().
* log linkmgr & peermgr addFriend() and removeFriend().
* log pqiperson::connect(), p3PeerMgr::cleanUnusedLocations().
* Modify timing of cleanUnusedLocations (=>8min) & NETSTATE_PARAM_TIMEOUT (=>15min) (see if it has an effect).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4539 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* SSL_Peek is called on new connections, and we only accept it when there is data.
* This should stop some of the unstable connections caused by wrong IP:Ports
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4533 b45a01b8-16f6-495d-af2f-9b41ad6348cc
It was using the same port as the DHT, and switching to a Random one, on its own.
* Added debugging for net reset.
* Added further debugging for ssl (reset + killing existing connections)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4530 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* extract external address from DhtStunner if possible.
* added p3PeerMgr::UpdateOwnAddress(), which should only be called by p3netmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4512 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* set PortForward in NetStateBox when the Network has been setup.
* add GeneralConfig to rsConfig external interface.
* enabled ADVANCED configuration option.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4500 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- p3peermgr now uses RS_NET_MODE_XXXX instead of RS_NET_MODE_TRY_XXXX
- p3netmgr maintains both TRY and ACTUAL mode.
- actual mode is not visible through old interface (TO FIX).
- added default to UPNP mode.
* Added debug to show changes to peer->VisState.
- It seems that this is never updated by p3disc. BUG, (TO FIX).
* disabled extra debug in rsdiscitems.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4498 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Increased Timeout Periods for UDP connections - this was stopping half of them from succeeding.
* The other bug (Heartbeat / stream issues) has not been solved.
* Fixed up initialisation of p3BitDht data.
* add DropPeers() as NON-ACTIVE (this allows peers which aren't VISIBLE to still try and connect)
* export AddFriends/FOF/Others to LinkMgr to allow further SSL IDs to be added to p3BitDht.
* Export UDP Addresses to DhtWindow.
* switch off lots of debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4469 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* changed PeerConnectStateBox::getNetState() to calcNetState() to provide up-to-date info (internal mNetState can be stale!)
* Added "bool addrChangeLikely" parameter to ReleaseProxyExclusiveLock() - this parameter is determined by whether we actually started a UDP connection.
* disabled ForceRestun in UdpStunner if addrChange is unlikely.
* Reduced Stunner Period Slow from 3 minutes to 2 minutes - exact value will only be known after real-world testing.
* More debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4458 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Forgot that RELAY connections need extra parameters.
* Added proxyAddr, srcAddr and Bandwidth parameters to connection attempts.
* Completed UDP connection callouts from p3bitdht.
* Added TCP connection attempt initiation from p3bitdht.
* Added PASSIVE / ACTIVE determination in p3bitdht.
* completed UDP connection logic in pqissludp.
* enabled UDPSTUN_ALLOW_LOCALNET for testing.
* added CONSTs for TOU Receiver Indices.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4446 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Infact, it doesn't use these two classes at all (so you could pass void in the init function)...
- It should actually update p3PeerMgr when it detects a Net Address change (TODO).
This means that there is potentially no need for a dummy object - p3NetMgrIMPL can be used almost as is!
* changed p3PeerMgrIMPL & p3LinkMgrIMPL pointers back to p3PeerMgr and p3LinkMgr pointers.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4445 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added ConnectionFeedback fn to NetAssistConnect & p3BitDht.
* Added TYPE definitions to pqiassist.h
* added extra parameters to p3LinkMgr::connectAttempt() (flags which will be used to pass DIRECT/PROXY/DIRECT + PASSIVE/ACTIVE)
* Added callback from p3LinkMgr to NetMgr::netAssistStatusUpdate() => Dht::ConnectionFeedback.
* updated peerConnectRequest to trigger either TCP attempt (first) or UDP connection.
* updated parameters for p3LinkMgrIMPL::tryConnectUDP()
* added p3LinkMgrIMPL::locked_ConnectAttempt_SpecificAddress() for DHT => TCP attempt.
* added extra parameter to addAddressIfUnique... bool addFront => DHT attempts get pushed to front of Queue due to timing requirements.
* added extra parameter (flags) to pqiperson::connect() - matches extra parameters to p3LinkMgr::connectAttempt().
* added p3NetMgr::netAssistStatusUpdate()
* added mConnectFlags to pqissludp
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4443 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Shifted real functionality to p3LinkMgrIMPL, p3NetMgrIMPL p3PeerMgrIMPL
This allows us to test most objects with dummy objects (i.e. no need for full AuthSSL/AuthGPG objects)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4441 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added DETERMINISTIC_SYMMETRIC NAT to retroshare/rsconfig and NetStateBox.
* added ExclusiveMode to udpStunner.
* Tweaked UdpStunner ping logic.
* added TCP_WAIT to Connect Logic.
NB: This stuff is still to be tested!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4440 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added tick() and setRefreshPeriod() to pqiAddrAssist
* Fixed up NETSTATE #defines, all refer to retroshare/rsconfig.h
* added #define => string translations for NETSTATEs
* Added NetStateBox as an independent Network State determination (has no effect on existing code).
* added slowTick() to p3NetMgr.
* connected p3NetMgr::getNet... to NetStateBox.
* piped network state into NetStateBox.
* added p3NetMgr check for changes in NatType. (to update Stun Rate / Attach Mode (TODO))
* added NetStateBox.reset()
* tweaked lots of debugging.
* added Default Stun Period (pass -1 to setRefreshPeriod())
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4435 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added OthersList to p3linkmgr. this is important so we can send ACTIONS for removed Peers.
* added missing mStatusChanged when adding Friend.
* added printPeerLists to PeerMgr and LinkMgr.
* tweaked debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4427 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Catch Failed Connections, and add to NewsFeed for GUI notifications.
* outgoing connections are captured via pqissl::FailedCertificate() functions.
* incoming connections are captured at certificate verification.
* Certs are passed to AuthSSL, which calls the notification system.
* Additional types have been added to rsnotify to handle these cases.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4425 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* switched off lots of debugging, and removed "common" messages, so we can focus on the actions.
* Added extra debugging focused on the connections.
* Removed "lastconnect" from p3LinkMgr.
* added p3PeerMgr::updateLastConnect() fn, so this parameter will be stored.
* added calls from p3LinkMgr at connect and disconnect.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4424 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Split p3bitdht_peers.cc debugging in two. Hid Id Translation debug (that code is fine)
* Added initialisation of p3bitdht peer data structure (using values from peernet).
* Added BITDHT_QFLAGS_UPDATES flag.
* Added Tick() interface to NetAssistConnect interface, tick it from p3NetMgr.
* FIXED OLD BUG: netAssistFriend was not being called from p3LinkMgr::connectResult() this meant all peers where being searched for.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Improved debugging messages for p3linkmgr & p3netmgr, switched on debugging.
* added ids to p3bitdht peers.
* added datatypes to RsDht peers data structure, and translate the data.
* add const to PeerConnectStateBox::connectState().
* cleaned up p3LinkMgr::locked_ConnectAttempt_AddDynDNS() a bit.
* filled in friend data types in p3LinkMgr (allows connections now!)
* added printConnectState() in p3LinkMgr
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4421 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added configuration saving for plugin manager and serialization methods
- added a list of accepted plugin hashes
- added plugin widget for each plugin in settings, to allow enabling/disabling plugins
- updated LinkCloud plugin to new rsPlugin class
- put the addconfiguration for plugin manager in rsinit.cc a bit earlier to allow to load
the list of accepted hashes early enough
- added icon for disabled plugins
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4393 b45a01b8-16f6-495d-af2f-9b41ad6348cc
You can enable the debugging of the waiting time for a lock of RsMutex in rsthreads.h with
#define RSMUTEX_DEBUG 300
That means all locks waiting longer than 300ms are logged into the stderr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4392 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Major changes are:
* Improvements to tcponudp library to allow multiple UdpStacks / ports, with alternative recievers.
* Resurrected the UdpStunner code, and improved it.
* Added UdpRelay code.
* Modified startup code and ssludp code to use the new tcponudp and add a stunner.
* fixed buggy rs_inet_ntoa
* fixed a bunch of apple gcc warnings. mainly for(;;); => for(;;) ;
These changes shouldn't affect libretroshare stability... those changes will follow!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- ported LinksCloud to a new plugin, and removed it from main sources
Next moves:
- add gui for managing plugins
- handle windows compilation
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4275 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Removed extra "/" of the filename (e.g. "E://") of the hashed file when sharing a whole drive.
Recompile of the gui needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4200 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added new button in ConnectFriendWizard for cleaning the certificate.
Fixed cleaning:
- added blank line after the armor header
- moved the checksum to a new line
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4134 b45a01b8-16f6-495d-af2f-9b41ad6348cc
so RS ended up with 200+ zombie child processes. This prevented gpg from being called.
The fix was to add waitpid() calls to cleanup the zombies.
* added cleanupZombies() to authgpg.cc (OSX only).
* updated OSX gpgme libraries to 1.3.0 (added libassuan to RetroShare.pro).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3974 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- authssl would call OPENSSL_malloc without OPENSSL_free
- pqistore was not deleting items in pqiSSLStore when BIN_FLAGS_NO_DELETE is not here
- rsdir/rsinit were calling opendir withoug closedir (which might eat FDs, in addition)
- udplayer was not freeing it's 16KB buffer at end of loop.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3948 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Changed the usage of RsPeerDetails.validLvl to RsPeerDetails.trustLvl for the display in the column "Did I authenticated peer" in NetworkDialog.
Added an icon to the MessageBox of the NotifySysMessage.
Fixed german language.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3926 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* shifted dht stats call outside of p3connmgr's mtx.
NB: As Dht callback functions hold DHT lock, then lock p3ConnectMgr...
we cannot have any opposite locks (p3connmgr, then DHT) or we have
potential for a deadlock.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3861 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* new uniform #define DEBUG_TRANSFERS to switch on packet timings.
* switched off by default.
* enabled BinData printing again.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3785 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* print packet size and time - when actually sending it.
* print reason for stopping to read or send packets.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Reload all gpg keys in AuthGPGimpl::LoadCertificateFromString, when new signatures are added - not only the key was imported.
Changed parameters of RsPeers and AuthGPG from "std::string" to "const std::string&"
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3753 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Plumbed stats through the the retroshare interface.
* Also changed Channel store period back to 10 minutes.... (Reduce overall file count).
This must be done some time before the any changes are made to Channels periods.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3721 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- FAIL if too old.
- FAIL if invalid address.
- FAIL if on BannedIpList (=1.0.0.0)
- ACCEPT if extAddress.
- ACCEPT if !extAddress && sameNet(localAddr).
- FAIL all the rest.
* Test Results are printed if CONN_DEBUG is switched on.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3705 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Problem:
RetroShare connects to all ssl's at once. In Windows XP there is a build-in connection limit of concurrent incomplete connections.
Quote:
"The TCP/IP stack in Windows XP with Service Pack 2 (SP2) installed limits the number of concurrent, incomplete outbound TCP connection attempts. When the limit is reached, subsequent connection attempts are put in a queue and resolved at a fixed rate so that there are only a limited number of connections in the incomplete state."
This results in a high usage of the nonepaged pool and when it runs over the limit it results in the following error in the system log:
German: "TCP/IP hat das Sicherheitslimit erreicht, das für die Anzahl gleichzeitiger TCP-Verbindungsversuche festgelegt wurde."
English: "TCP/IP has reached the security limit imposed on the number of concurrent (incomplete) TCP connect attempts."
After a longer runtime of RetroShare and a very high usage of the nonepaged pool all connections of all running programs are lost and no new connections can be made. At the end it can cause a blue screen.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3631 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* NOTE about how to correctly implement Peer filtering.
* added peerConnectRequest() when PeerCallback(success) happens... starts UDP connection.
* Split the p3conmgr::tryConnect() functions into sub functions.
* added p3ConnMgr functions for UDP connections.
* Added AddifUnique(conect_address), to ConnMgr, this should reduce the number of connection attempts, by removing dups.
* Disabled bitdht in libretroshare.pro for the moment.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3605 b45a01b8-16f6-495d-af2f-9b41ad6348cc
