Merge 9a97195b8c into 1c56385473

RNS/Interfaces/RNodeMultiInterface.py

@@ -249,6 +249,7 @@ class RNodeMultiInterface(Interface):
         if (not self.validcfg):
             raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")
 
+    def start(self):
         try:
             self.open_port()
 
@@ -323,8 +324,8 @@ class RNodeMultiInterface(Interface):
                         lt_alock=subint[9]
                 )
 
-                interface.OUT = self.OUT
+                interface.OUT = subint[10]
-                interface.IN  = self.IN
+                interface.IN  = True
                 
                 interface.announce_rate_target = self.announce_rate_target
                 interface.mode = self.mode
@@ -1006,6 +1007,11 @@ class RNodeSubInterface(Interface):
         self.parent_interface = parent_interface
         self.announce_rate_target = None
 
+        self.mode = None
+        self.announce_cap = None
+        self.bitrate = None
+        self.ifac_size = None
+
         # add this interface to the subinterfaces array
         self.parent_interface.subinterfaces[index] = self
 

RNS/Reticulum.py

@@ -971,7 +971,7 @@ class Reticulum:
                                                 enabled_count += 1
 
                                     # Create an array with a row for each subinterface
-                                    subint_config = [[0 for x in range(10)] for y in range(enabled_count)]
+                                    subint_config = [[0 for x in range(11)] for y in range(enabled_count)]
                                     subint_index = 0
 
                                     for subinterface in c:
@@ -1000,6 +1000,11 @@ class Reticulum:
                                                 subint_config[subint_index][8] = st_alock
                                                 lt_alock = float(subinterface_config["airtime_limit_long"]) if "airtime_limit_long" in subinterface_config else None
                                                 subint_config[subint_index][9] = lt_alock
+
+                                                if "outgoing" in subinterface_config and subinterface_config.as_bool("outgoing") == False:
+                                                    subint_config[subint_index][10] = False
+                                                else:
+                                                    subint_config[subint_index][10] = True
                                                 subint_index += 1
 
                                     # if no subinterfaces are defined
@@ -1025,10 +1030,8 @@ class Reticulum:
                                         id_callsign = id_callsign
                                     )
 
-                                    if "outgoing" in c and c.as_bool("outgoing") == False:
+                                    interface.IN = False
-                                        interface.OUT = False
+                                    interface.OUT = False
-                                    else:
-                                        interface.OUT = True
 
                                     interface.mode = interface_mode
 
@@ -1079,6 +1082,9 @@ class Reticulum:
 
                                     RNS.Transport.interfaces.append(interface)
 
+                                    if isinstance(interface, RNS.Interfaces.RNodeMultiInterface.RNodeMultiInterface):
+                                        interface.start()
+
                             else:
                                 RNS.log("Skipping disabled interface \""+name+"\"", RNS.LOG_DEBUG)
 

RNS/Utilities/rnodeconf.py

@@ -81,7 +81,9 @@ class KISS():
     CMD_BLINK       = 0x30
     CMD_RANDOM      = 0x40
     CMD_DISP_INT    = 0x45
+    CMD_NP_INT      = 0x65
     CMD_DISP_ADR    = 0x63
+    CMD_DISP_BLNK   = 0x64
     CMD_BT_CTRL     = 0x46
     CMD_BT_PIN      = 0x62
     CMD_BOARD       = 0x47
@@ -637,6 +639,20 @@ class RNode():
         if written != len(kiss_command):
             raise IOError("An IO error occurred while sending display intensity command to device")
 
+    def set_display_blanking(self, blanking_timeout):
+        data = bytes([blanking_timeout & 0xFF])
+        kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_DISP_BLNK])+data+bytes([KISS.FEND])
+        written = self.serial.write(kiss_command)
+        if written != len(kiss_command):
+            raise IOError("An IO error occurred while sending display blanking timeout command to device")
+
+    def set_neopixel_intensity(self, intensity):
+        data = bytes([intensity & 0xFF])
+        kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_NP_INT])+data+bytes([KISS.FEND])
+        written = self.serial.write(kiss_command)
+        if written != len(kiss_command):
+            raise IOError("An IO error occurred while sending NeoPixel intensity command to device")
+
     def set_display_address(self, address):
         data = bytes([address & 0xFF])
         kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_DISP_ADR])+data+bytes([KISS.FEND])
@@ -1261,8 +1277,11 @@ def main():
         parser.add_argument("-p", "--bluetooth-pair", action="store_true", help="Put device into bluetooth pairing mode")
 
         parser.add_argument("-D", "--display", action="store", metavar="i", type=int, default=None, help="Set display intensity (0-255)")
+        parser.add_argument("-t", "--timeout", action="store", metavar="s", type=int, default=None, help="Set display timeout in seconds, 0 to disable")
         parser.add_argument("--display-addr", action="store", metavar="byte", type=str, default=None, help="Set display address as hex byte (00 - FF)")
 
+        parser.add_argument("--np", action="store", metavar="i", type=int, default=None, help="Set NeoPixel intensity (0-255)")
+
         parser.add_argument("--freq", action="store", metavar="Hz", type=int, default=None, help="Frequency in Hz for TNC mode")
         parser.add_argument("--bw", action="store", metavar="Hz", type=int, default=None, help="Bandwidth in Hz for TNC mode")
         parser.add_argument("--txp", action="store", metavar="dBm", type=int, default=None, help="TX power in dBm for TNC mode")
@@ -3168,6 +3187,27 @@ def main():
                 RNS.log("Setting display intensity to "+str(di))
                 rnode.set_display_intensity(di)
 
+            if isinstance(args.timeout, int):
+                di = args.timeout
+                if di < 0:
+                    di = 0
+                if di > 255:
+                    di = 255
+                if di == 0:
+                    RNS.log("Disabling display blanking")
+                else:
+                    RNS.log("Setting display timeout to "+str(di))
+                rnode.set_display_blanking(di)
+
+            if isinstance(args.np, int):
+                di = args.np
+                if di < 0:
+                    di = 0
+                if di > 255:
+                    di = 255
+                RNS.log("Setting NeoPixel intensity to "+str(di))
+                rnode.set_neopixel_intensity(di)
+
             if isinstance(args.display_addr, str):
                 set_addr = False
                 try: