Added T3S3 flashing, fixed Heltec V3 autoinstaller menu

This commit is contained in:
Mark Qvist 2024-05-18 18:40:21 +02:00
parent 5915228f5b
commit bb0ce4faca

View File

@ -202,6 +202,8 @@ class ROM():
BOARD_LORA32_V2_1 = 0x37
BOARD_RAK4631 = 0x51
MANUAL_FLASH_MODELS = [MODEL_A1, MODEL_A6]
mapped_product = ROM.PRODUCT_RNODE
products = {
ROM.PRODUCT_RNODE: "RNode",
@ -1599,7 +1601,7 @@ def main():
print("[6] LilyGO T-Beam")
print("[7] Heltec LoRa32 v2")
print("[8] Heltec LoRa32 v3")
#print("[9] LilyGO LoRa T3S3")
print("[9] LilyGO LoRa T3S3")
print("[10] RAK4631")
print(" .")
print(" / \\ Select one of these options if you want to easily turn")
@ -1704,10 +1706,6 @@ def main():
print("Important! Using RNode firmware on Heltec devices should currently be")
print("considered experimental. It is not intended for production or critical use.")
print("")
print("Please also note that a number of users have reported issues with the serial")
print("to USB chips on Heltec LoRa V2 boards, resulting in intermittent USB comms")
print("and problems flashing and updating devices.")
print("")
print("The currently supplied firmware is provided AS-IS as a courtesey to those")
print("who would like to experiment with it. Hit enter to continue.")
print("---------------------------------------------------------------------------")
@ -1741,6 +1739,10 @@ def main():
print("")
print("Please note that Bluetooth is currently not implemented on this board.")
print("")
print("The currently supplied firmware is provided AS-IS as a courtesey to those")
print("who would like to experiment with it. Hit enter to continue.")
print("---------------------------------------------------------------------------")
input()
elif c_dev == 10:
selected_product = ROM.PRODUCT_RAK4631
clear()
@ -1979,7 +1981,7 @@ def main():
elif selected_product == ROM.PRODUCT_H32_V2:
selected_mcu = ROM.MCU_ESP32
print("\nWhat band is this Heltec LoRa32 for?\n")
print("\nWhat band is this Heltec LoRa32 V2 for?\n")
print("[1] 433 MHz")
print("[2] 868 MHz")
print("[3] 915 MHz")
@ -2002,6 +2004,10 @@ def main():
elif selected_product == ROM.PRODUCT_H32_V3:
selected_mcu = ROM.MCU_ESP32
print("\nWhat band is this Heltec LoRa32 V3 for?\n")
print("[1] 433 MHz")
print("[2] 868 MHz")
print("[3] 915 MHz")
print("[4] 923 MHz")
try:
c_model = int(input())
if c_model < 1 or c_model > 4:
@ -2773,6 +2779,13 @@ def main():
RNS.log("Missing parameters, cannot continue")
graceful_exit(68)
if selected_model in ROM.MANUAL_FLASH_MODELS:
RNS.log("")
RNS.log("Please put the board into flashing mode now, by holding the BOOT or PRG button,")
RNS.log("while momentarily pressing the RESET button. Then release the BOOT or PRG button.")
RNS.log("Hit enter when this is done.")
input()
if fw_filename == "extracted_rnode_firmware.zip":
try:
RNS.log("Flashing RNode firmware to device on "+args.port)
@ -2839,6 +2852,13 @@ def main():
RNS.log("Firmware file not found")
graceful_exit()
if selected_model in ROM.MANUAL_FLASH_MODELS:
RNS.log("")
RNS.log("Please take the board out of flashing mode by momentarily pressing the RESET button.")
RNS.log("Hit enter when this is done.")
input()
sleep(2.5)
RNS.log("Opening serial port "+args.port+"...")
try:
rnode_port = args.port
@ -2986,18 +3006,38 @@ def main():
partition_full_path = UPD_DIR+"/"+selected_version+"/"+partition_filename
partition_hash = get_partition_hash(rnode.platform, partition_full_path)
if partition_hash != None:
rnode.set_firmware_hash(partition_hash)
try:
rnode.indicate_firmware_update()
except Exception as e:
RNS.log("Error while indicating firmware update start to board, attempting update anyway...")
rnode.set_firmware_hash(partition_hash)
sleep(1)
if rnode.platform == ROM.PLATFORM_NRF52:
# Allow extra time for writing to EEPROM on NRF52. Current implementation is slow.
sleep(14)
try:
rnode.disconnect()
except Exception as e:
RNS.log("Error while gracefully disconnecting device before firmware update, attempting update anyway...")
if rnode.model in ROM.MANUAL_FLASH_MODELS:
RNS.log("")
RNS.log("Please put the board into flashing mode now, by holding the BOOT or PRG button,")
RNS.log("while momentarily pressing the RESET button. Then release the BOOT or PRG button.")
RNS.log("Hit enter when this is done.")
input()
flash_status = call(get_flasher_call(rnode.platform, fw_filename))
if flash_status == 0:
RNS.log("Flashing new firmware completed")
if rnode.model in ROM.MANUAL_FLASH_MODELS:
RNS.log("")
RNS.log("Please take the board out of flashing mode by momentarily pressing the RESET button.")
RNS.log("Hit enter when this is done.")
input()
RNS.log("Opening serial port "+args.port+"...")
try:
rnode_port = args.port
@ -3326,10 +3366,15 @@ def main():
RNS.log("No signing key found")
graceful_exit()
if model == ROM.MODEL_A1 or model == ROM.MODEL_A6:
rnode.hard_reset()
RNS.log("Waiting for ESP32 reset...")
time.sleep(6.5)
if selected_model in ROM.MANUAL_FLASH_MODELS:
rnode.serial.close()
RNS.log("")
RNS.log("Please reset the board by momentarily pressing the RESET button.")
RNS.log("Hit enter when this is done.")
input()
sleep(2.5)
rnode_serial = rnode_open_serial(rnode_port)
rnode = RNode(rnode_serial)
RNS.log("Bootstrapping device EEPROM...")
@ -3368,6 +3413,7 @@ def main():
if rnode.platform == ROM.PLATFORM_NRF52:
# Allow extra time for writing to EEPROM on NRF52. Current implementation is slow.
sleep(3)
RNS.log("EEPROM written! Validating...")
if wants_fw_provision:
@ -3433,10 +3479,21 @@ def main():
else:
rnode.hard_reset()
if selected_model in ROM.MANUAL_FLASH_MODELS:
rnode.serial.close()
RNS.log("")
RNS.log("Please reset the board by momentarily pressing the RESET button.")
RNS.log("Hit enter when this is done.")
input()
rnode.provisioned = True
else:
rnode.download_eeprom()
if rnode.provisioned:
RNS.log("EEPROM Bootstrapping successful!")
if not selected_model in ROM.MANUAL_FLASH_MODELS:
rnode.hard_reset()
if args.autoinstall:
print("")
print("RNode Firmware autoinstallation complete!")