RNode_Firmware_CE/Boards.h
2024-05-02 01:24:30 +02:00

440 lines
12 KiB
C

// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#include "Modem.h"
#ifndef BOARDS_H
#define BOARDS_H
#define PLATFORM_AVR 0x90
#define PLATFORM_ESP32 0x80
#define PLATFORM_NRF52 0x70
#define MCU_1284P 0x91
#define MCU_2560 0x92
#define MCU_ESP32 0x81
#define MCU_NRF52 0x71
#define BOARD_RNODE 0x31
#define BOARD_HMBRW 0x32
#define BOARD_TBEAM 0x33
#define BOARD_HUZZAH32 0x34
#define BOARD_GENERIC_ESP32 0x35
#define BOARD_LORA32_V2_0 0x36
#define BOARD_LORA32_V2_1 0x37
#define BOARD_LORA32_V1_0 0x39
#define BOARD_HELTEC32_V2 0x38
#define BOARD_HELTEC32_V3 0x3A
#define BOARD_RNODE_NG_20 0x40
#define BOARD_RNODE_NG_21 0x41
#define BOARD_RNODE_NG_22 0x42
#define BOARD_GENERIC_NRF52 0x50
#define BOARD_RAK4630 0x51
#if defined(__AVR_ATmega1284P__)
#define PLATFORM PLATFORM_AVR
#define MCU_VARIANT MCU_1284P
#elif defined(__AVR_ATmega2560__)
#define PLATFORM PLATFORM_AVR
#define MCU_VARIANT MCU_2560
#elif defined(ESP32)
#define PLATFORM PLATFORM_ESP32
#define MCU_VARIANT MCU_ESP32
#elif defined(NRF52840_XXAA)
#include <variant.h>
#define PLATFORM PLATFORM_NRF52
#define MCU_VARIANT MCU_NRF52
#else
#error "The firmware cannot be compiled for the selected MCU variant"
#endif
#ifndef MODEM
#if BOARD_MODEL == BOARD_RAK4630
#define MODEM SX1262
#elif BOARD_MODEL == BOARD_GENERIC_NRF52
#define MODEM SX1262
#else
#define MODEM SX1276
#endif
#endif
#define HAS_DISPLAY false
#define HAS_BLUETOOTH false
#define HAS_BLE false
#define HAS_TCXO false
#define HAS_PMU false
#define HAS_NP false
#define HAS_EEPROM false
#define HAS_INPUT false
#define HAS_SLEEP false
#if defined(ENABLE_TCXO)
#define HAS_TCXO true
#endif
#if MCU_VARIANT == MCU_1284P
const int pin_cs = 4;
const int pin_reset = 3;
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
#define BOARD_MODEL BOARD_RNODE
#define HAS_EEPROM true
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#elif MCU_VARIANT == MCU_2560
const int pin_cs = 5;
const int pin_reset = 4;
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
#define BOARD_MODEL BOARD_HMBRW
#define HAS_EEPROM true
#define CONFIG_UART_BUFFER_SIZE 768
#define CONFIG_QUEUE_SIZE 5120
#define CONFIG_QUEUE_MAX_LENGTH 24
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#elif MCU_VARIANT == MCU_ESP32
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 1024
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define GPS_BAUD_RATE 9600
#define PIN_GPS_TX 12
#define PIN_GPS_RX 34
#if BOARD_MODEL == BOARD_GENERIC_ESP32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 4;
const int pin_reset = 36;
const int pin_dio = 39;
const int pin_led_rx = 14;
const int pin_led_tx = 32;
#elif BOARD_MODEL == BOARD_TBEAM
#define HAS_DISPLAY true
#define HAS_PMU true
#define HAS_BLUETOOTH true
#define HAS_BLE true
#define HAS_CONSOLE true
#define HAS_SD false
#define HAS_EEPROM true
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_led_rx = 2;
const int pin_led_tx = 4;
#if MODEM == SX1262
#define HAS_TCXO true
#define HAS_BUSY true
#define DIO2_AS_RF_SWITCH true
const int pin_busy = 32;
const int pin_dio = 33;
const int pin_tcxo_enable = -1;
#else
const int pin_dio = 26;
#endif
#elif BOARD_MODEL == BOARD_HUZZAH32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 4;
const int pin_reset = 36;
const int pin_dio = 39;
const int pin_led_rx = 14;
const int pin_led_tx = 32;
#elif BOARD_MODEL == BOARD_LORA32_V1_0
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_BLE true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 14;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 25;
const int pin_led_tx = 2;
#else
const int pin_led_rx = 2;
const int pin_led_tx = 2;
#endif
#elif BOARD_MODEL == BOARD_LORA32_V2_0
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_BLE true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
#elif BOARD_MODEL == BOARD_LORA32_V2_1
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_BLE true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
#if HAS_TCXO == true
const int pin_tcxo_enable = 33;
#endif
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#elif BOARD_MODEL == BOARD_HELTEC32_V2
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 14;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#elif BOARD_MODEL == BOARD_HELTEC32_V3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_INPUT true
#define HAS_SLEEP true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_EEPROM true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13;
const int pin_led_tx = 14;
#else
const int pin_led_rx = 35;
const int pin_led_tx = 35;
#endif
const int pin_btn_usr1 = 0;
#define MODEM SX1262
#define HAS_TCXO true
const int pin_tcxo_enable = -1;
#define HAS_BUSY true
#define DIO2_AS_RF_SWITCH true
// Following pins are for the SX1262
const int pin_cs = 8;
const int pin_busy = 13;
const int pin_dio = 14;
const int pin_reset = 12;
const int pin_mosi = 10;
const int pin_miso = 11;
const int pin_sclk = 9;
#elif BOARD_MODEL == BOARD_RNODE_NG_20
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_NP true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
const int pin_np = 4;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
#endif
#elif BOARD_MODEL == BOARD_RNODE_NG_21
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_PMU true
#define HAS_NP true
#define HAS_SD false
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
const int pin_np = 12;
const int pin_dac = 25;
const int pin_adc = 34;
const int SD_MISO = 2;
const int SD_MOSI = 15;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 12;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#endif
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY true
#define HAS_CONSOLE false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
const int pin_cs = 7;
const int pin_reset = 8;
const int pin_sclk = 5;
const int pin_mosi = 6;
const int pin_miso = 3;
const int pin_tcxo_enable = -1;
const int pin_dio = 33;
const int pin_busy = 34;
const int pin_np = 38;
const int pin_dac = 25;
const int pin_adc = 1;
const int SD_MISO = 2;
const int SD_MOSI = 11;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#endif
#endif
#else
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
#endif
#elif MCU_VARIANT == MCU_NRF52
#if BOARD_MODEL == BOARD_RAK4630
#define HAS_EEPROM false
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU false
#define HAS_NP false
#define HAS_SD false
#define HAS_TCXO true
#define HAS_RF_SWITCH_RX_TX true
#define HAS_BUSY true
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 200
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define BLE_MANUFACTURER "RAK Wireless"
#define BLE_MODEL "RAK4640"
// Following pins are for the sx1262
const int pin_rxen = 37;
const int pin_reset = 38;
const int pin_cs = 42;
const int pin_sclk = 43;
const int pin_mosi = 44;
const int pin_miso = 45;
const int pin_busy = 46;
const int pin_dio = 47;
const int pin_led_rx = LED_BLUE;
const int pin_led_tx = LED_GREEN;
const int pin_tcxo_enable = -1;
#else
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
#endif
#endif
#ifndef HAS_RF_SWITCH_RX_TX
const int pin_rxen = -1;
const int pin_txen = -1;
#endif
#ifndef HAS_BUSY
const int pin_busy = -1;
#endif
#ifndef DIO2_AS_RF_SWITCH
#define DIO2_AS_RF_SWITCH false
#endif
#endif