mirror of
https://github.com/liberatedsystems/RNode_Firmware_CE.git
synced 2024-10-01 03:15:40 -04:00
533 lines
13 KiB
C++
533 lines
13 KiB
C++
#include <SPI.h>
|
|
#include <LoRa.h>
|
|
#include "Config.h"
|
|
#include "Framing.h"
|
|
#include "Utilities.cpp"
|
|
|
|
void setup() {
|
|
// Seed the PRNG
|
|
randomSeed(analogRead(0));
|
|
|
|
// Initialise serial communication
|
|
Serial.begin(serial_baudrate);
|
|
while (!Serial);
|
|
|
|
// Configure input and output pins
|
|
pinMode(pin_led_rx, OUTPUT);
|
|
pinMode(pin_led_tx, OUTPUT);
|
|
|
|
// Initialise buffers
|
|
memset(pbuf, 0, sizeof(pbuf));
|
|
memset(sbuf, 0, sizeof(sbuf));
|
|
memset(cbuf, 0, sizeof(cbuf));
|
|
|
|
#if QUEUE_SIZE > 0
|
|
memset(qbuf, 0, sizeof(qbuf));
|
|
memset(queued_lengths, 0, sizeof(queued_lengths));
|
|
#endif
|
|
|
|
// Set chip select, reset and interrupt
|
|
// pins for the LoRa module
|
|
LoRa.setPins(pin_cs, pin_reset, pin_dio);
|
|
|
|
// Validate board health, EEPROM and config
|
|
validateStatus();
|
|
}
|
|
|
|
bool startRadio() {
|
|
update_radio_lock();
|
|
if (!radio_online) {
|
|
if (!radio_locked && hw_ready) {
|
|
if (!LoRa.begin(lora_freq)) {
|
|
// The radio could not be started.
|
|
// Indicate this failure over both the
|
|
// serial port and with the onboard LEDs
|
|
kiss_indicate_error(ERROR_INITRADIO);
|
|
led_indicate_error(0);
|
|
} else {
|
|
radio_online = true;
|
|
|
|
setTXPower();
|
|
setBandwidth();
|
|
setSpreadingFactor();
|
|
setCodingRate();
|
|
getFrequency();
|
|
|
|
LoRa.enableCrc();
|
|
LoRa.onReceive(receiveCallback);
|
|
|
|
LoRa.receive();
|
|
|
|
// Flash an info pattern to indicate
|
|
// that the radio is now on
|
|
led_indicate_info(3);
|
|
}
|
|
|
|
} else {
|
|
// Flash a warning pattern to indicate
|
|
// that the radio was locked, and thus
|
|
// not started
|
|
led_indicate_warning(3);
|
|
}
|
|
} else {
|
|
// If radio is already on, we silently
|
|
// ignore the request.
|
|
}
|
|
}
|
|
|
|
void stopRadio() {
|
|
LoRa.end();
|
|
radio_online = false;
|
|
}
|
|
|
|
void update_radio_lock() {
|
|
if (lora_freq != 0 && lora_bw != 0 && lora_txp != 0xFF && lora_sf != 0) {
|
|
radio_locked = false;
|
|
} else {
|
|
radio_locked = true;
|
|
}
|
|
}
|
|
|
|
void receiveCallback(int packet_size) {
|
|
uint8_t header = LoRa.read(); packet_size--;
|
|
uint8_t sequence = packetSequence(header);
|
|
bool ready = false;
|
|
|
|
if (isSplitPacket(header) && seq == SEQ_UNSET) {
|
|
// This is the first part of a split
|
|
// packet, so we set the seq variable
|
|
// and add the data to the buffer
|
|
read_len = 0;
|
|
seq = sequence;
|
|
last_rssi = LoRa.packetRssi();
|
|
getPacketData(packet_size);
|
|
} else if (isSplitPacket(header) && seq == sequence) {
|
|
// This is the second part of a split
|
|
// packet, so we add it to the buffer
|
|
// and set the ready flag.
|
|
last_rssi = (last_rssi+LoRa.packetRssi())/2;
|
|
getPacketData(packet_size);
|
|
seq = SEQ_UNSET;
|
|
ready = true;
|
|
} else if (isSplitPacket(header) && seq != sequence) {
|
|
// This split packet does not carry the
|
|
// same sequence id, so we must assume
|
|
// that we are seeing the first part of
|
|
// a new split packet.
|
|
read_len = 0;
|
|
seq = sequence;
|
|
last_rssi = LoRa.packetRssi();
|
|
getPacketData(packet_size);
|
|
} else if (!isSplitPacket(header)) {
|
|
// This is not a split packet, so we
|
|
// just read it and set the ready
|
|
// flag to true.
|
|
|
|
if (seq != SEQ_UNSET) {
|
|
// If we already had part of a split
|
|
// packet in the buffer, we clear it.
|
|
read_len = 0;
|
|
seq = SEQ_UNSET;
|
|
}
|
|
|
|
last_rssi = LoRa.packetRssi();
|
|
getPacketData(packet_size);
|
|
ready = true;
|
|
}
|
|
|
|
if (ready) {
|
|
// We first signal the RSSI of the
|
|
// recieved packet to the host.
|
|
Serial.write(FEND);
|
|
Serial.write(CMD_STAT_RSSI);
|
|
Serial.write((uint8_t)(last_rssi-rssi_offset));
|
|
|
|
// And then write the entire packet
|
|
Serial.write(FEND);
|
|
Serial.write(CMD_DATA);
|
|
for (int i = 0; i < read_len; i++) {
|
|
uint8_t byte = pbuf[i];
|
|
if (byte == FEND) { Serial.write(FESC); byte = TFEND; }
|
|
if (byte == FESC) { Serial.write(FESC); byte = TFESC; }
|
|
Serial.write(byte);
|
|
}
|
|
Serial.write(FEND);
|
|
read_len = 0;
|
|
}
|
|
}
|
|
|
|
|
|
bool outboundReady() {
|
|
#if QUEUE_SIZE > 0
|
|
if (queue_head != queue_tail) {
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
#else
|
|
return outbound_ready;
|
|
#endif
|
|
}
|
|
|
|
bool queueFull() {
|
|
size_t new_queue_head = (queue_head+1)%QUEUE_BUF_SIZE;
|
|
if (new_queue_head == queue_tail) {
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
void enqueuePacket(size_t length) {
|
|
size_t new_queue_head = (queue_head+1)%QUEUE_BUF_SIZE;
|
|
if (new_queue_head != queue_tail) {
|
|
queued_lengths[queue_head] = length;
|
|
size_t insert_addr = queue_head * MTU;
|
|
for (int i = 0; i < length; i++) {
|
|
qbuf[insert_addr+i] = sbuf[i];
|
|
}
|
|
queue_head = new_queue_head;
|
|
} else {
|
|
kiss_indicate_error(ERROR_QUEUE_FULL);
|
|
}
|
|
}
|
|
|
|
#if QUEUE_SIZE > 0
|
|
void processQueue() {
|
|
size_t fetch_address = queue_tail*MTU;
|
|
size_t fetch_length = queued_lengths[queue_tail];
|
|
|
|
for (int i = 0; i < fetch_length; i++) {
|
|
tbuf[i] = qbuf[fetch_address+i];
|
|
qbuf[fetch_address+i] = 0x00;
|
|
}
|
|
|
|
queued_lengths[queue_tail] = 0;
|
|
|
|
queue_tail = ++queue_tail%QUEUE_BUF_SIZE;
|
|
|
|
transmit(fetch_length);
|
|
|
|
if (!queueFull()) {
|
|
kiss_indicate_ready();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void transmit(size_t size) {
|
|
if (radio_online) {
|
|
led_tx_on();
|
|
size_t written = 0;
|
|
uint8_t header = random(256) & 0xF0;
|
|
|
|
if (size > SINGLE_MTU - HEADER_L) {
|
|
header = header | FLAG_SPLIT;
|
|
}
|
|
|
|
LoRa.beginPacket();
|
|
LoRa.write(header); written++;
|
|
|
|
for (size_t i; i < size; i++) {
|
|
#if QUEUE_SIZE > 0
|
|
LoRa.write(tbuf[i]);
|
|
#else
|
|
LoRa.write(sbuf[i]);
|
|
#endif
|
|
|
|
written++;
|
|
|
|
if (written == 255) {
|
|
LoRa.endPacket();
|
|
LoRa.beginPacket();
|
|
LoRa.write(header);
|
|
written = 1;
|
|
}
|
|
}
|
|
|
|
LoRa.endPacket();
|
|
led_tx_off();
|
|
|
|
LoRa.receive();
|
|
|
|
} else {
|
|
kiss_indicate_error(ERROR_TXFAILED);
|
|
led_indicate_error(5);
|
|
}
|
|
|
|
#if QUEUE_SIZE == 0
|
|
if (FLOW_CONTROL_ENABLED)
|
|
kiss_indicate_ready();
|
|
#endif
|
|
}
|
|
|
|
void serialCallback(uint8_t sbyte) {
|
|
if (IN_FRAME && sbyte == FEND && command == CMD_DATA) {
|
|
IN_FRAME = false;
|
|
|
|
if (QUEUE_SIZE == 0) {
|
|
if (outbound_ready) {
|
|
kiss_indicate_error(ERROR_QUEUE_FULL);
|
|
} else {
|
|
outbound_ready = true;
|
|
}
|
|
} else {
|
|
enqueuePacket(frame_len);
|
|
}
|
|
} else if (sbyte == FEND) {
|
|
IN_FRAME = true;
|
|
command = CMD_UNKNOWN;
|
|
frame_len = 0;
|
|
} else if (IN_FRAME && frame_len < MTU) {
|
|
// Have a look at the command byte first
|
|
if (frame_len == 0 && command == CMD_UNKNOWN) {
|
|
command = sbyte;
|
|
} else if (command == CMD_DATA) {
|
|
if (sbyte == FESC) {
|
|
ESCAPE = true;
|
|
} else {
|
|
if (ESCAPE) {
|
|
if (sbyte == TFEND) sbyte = FEND;
|
|
if (sbyte == TFESC) sbyte = FESC;
|
|
ESCAPE = false;
|
|
}
|
|
sbuf[frame_len++] = sbyte;
|
|
}
|
|
} else if (command == CMD_FREQUENCY) {
|
|
if (sbyte == FESC) {
|
|
ESCAPE = true;
|
|
} else {
|
|
if (ESCAPE) {
|
|
if (sbyte == TFEND) sbyte = FEND;
|
|
if (sbyte == TFESC) sbyte = FESC;
|
|
ESCAPE = false;
|
|
}
|
|
cbuf[frame_len++] = sbyte;
|
|
}
|
|
|
|
if (frame_len == 4) {
|
|
uint32_t freq = (uint32_t)cbuf[0] << 24 | (uint32_t)cbuf[1] << 16 | (uint32_t)cbuf[2] << 8 | (uint32_t)cbuf[3];
|
|
|
|
if (freq == 0) {
|
|
kiss_indicate_frequency();
|
|
} else {
|
|
lora_freq = freq;
|
|
if (op_mode == MODE_HOST) setFrequency();
|
|
kiss_indicate_frequency();
|
|
}
|
|
}
|
|
} else if (command == CMD_BANDWIDTH) {
|
|
if (sbyte == FESC) {
|
|
ESCAPE = true;
|
|
} else {
|
|
if (ESCAPE) {
|
|
if (sbyte == TFEND) sbyte = FEND;
|
|
if (sbyte == TFESC) sbyte = FESC;
|
|
ESCAPE = false;
|
|
}
|
|
cbuf[frame_len++] = sbyte;
|
|
}
|
|
|
|
if (frame_len == 4) {
|
|
uint32_t bw = (uint32_t)cbuf[0] << 24 | (uint32_t)cbuf[1] << 16 | (uint32_t)cbuf[2] << 8 | (uint32_t)cbuf[3];
|
|
|
|
if (bw == 0) {
|
|
kiss_indicate_bandwidth();
|
|
} else {
|
|
lora_bw = bw;
|
|
if (op_mode == MODE_HOST) setBandwidth();
|
|
kiss_indicate_bandwidth();
|
|
}
|
|
}
|
|
} else if (command == CMD_TXPOWER) {
|
|
if (sbyte == 0xFF) {
|
|
kiss_indicate_txpower();
|
|
} else {
|
|
int txp = sbyte;
|
|
if (txp > 17) txp = 17;
|
|
|
|
lora_txp = txp;
|
|
if (op_mode == MODE_HOST) setTXPower();
|
|
kiss_indicate_txpower();
|
|
}
|
|
} else if (command == CMD_SF) {
|
|
if (sbyte == 0xFF) {
|
|
kiss_indicate_spreadingfactor();
|
|
} else {
|
|
int sf = sbyte;
|
|
if (sf < 7) sf = 7;
|
|
if (sf > 12) sf = 12;
|
|
|
|
lora_sf = sf;
|
|
if (op_mode == MODE_HOST) setSpreadingFactor();
|
|
kiss_indicate_spreadingfactor();
|
|
}
|
|
} else if (command == CMD_CR) {
|
|
if (sbyte == 0xFF) {
|
|
kiss_indicate_codingrate();
|
|
} else {
|
|
int cr = sbyte;
|
|
if (cr < 5) cr = 5;
|
|
if (cr > 8) cr = 8;
|
|
|
|
lora_cr = cr;
|
|
if (op_mode == MODE_HOST) setCodingRate();
|
|
kiss_indicate_codingrate();
|
|
}
|
|
} else if (command == CMD_RADIO_STATE) {
|
|
if (sbyte == 0xFF) {
|
|
kiss_indicate_radiostate();
|
|
} else if (sbyte == 0x00) {
|
|
stopRadio();
|
|
kiss_indicate_radiostate();
|
|
} else if (sbyte == 0x01) {
|
|
startRadio();
|
|
kiss_indicate_radiostate();
|
|
}
|
|
} else if (command == CMD_STAT_RX) {
|
|
kiss_indicate_stat_rx();
|
|
} else if (command == CMD_STAT_TX) {
|
|
kiss_indicate_stat_tx();
|
|
} else if (command == CMD_STAT_RSSI) {
|
|
kiss_indicate_stat_rssi();
|
|
} else if (command == CMD_RADIO_LOCK) {
|
|
update_radio_lock();
|
|
kiss_indicate_radio_lock();
|
|
} else if (command == CMD_BLINK) {
|
|
led_indicate_info(sbyte);
|
|
} else if (command == CMD_RANDOM) {
|
|
kiss_indicate_random(getRandom());
|
|
} else if (command == CMD_DETECT) {
|
|
if (sbyte == DETECT_REQ) {
|
|
kiss_indicate_detect();
|
|
}
|
|
} else if (command == CMD_UNLOCK_ROM) {
|
|
if (sbyte == ROM_UNLOCK_BYTE) {
|
|
unlock_rom();
|
|
}
|
|
} else if (command == CMD_ROM_READ) {
|
|
kiss_dump_eeprom();
|
|
} else if (command == CMD_ROM_WRITE) {
|
|
if (sbyte == FESC) {
|
|
ESCAPE = true;
|
|
} else {
|
|
if (ESCAPE) {
|
|
if (sbyte == TFEND) sbyte = FEND;
|
|
if (sbyte == TFESC) sbyte = FESC;
|
|
ESCAPE = false;
|
|
}
|
|
cbuf[frame_len++] = sbyte;
|
|
}
|
|
|
|
if (frame_len == 2) {
|
|
eeprom_write(cbuf[0], cbuf[1]);
|
|
}
|
|
} else if (command == CMD_FW_VERSION) {
|
|
kiss_indicate_version();
|
|
} else if (command == CMD_CONF_SAVE) {
|
|
eeprom_conf_save();
|
|
} else if (command == CMD_CONF_DELETE) {
|
|
eeprom_conf_delete();
|
|
}
|
|
}
|
|
}
|
|
|
|
void updateModemStatus() {
|
|
uint8_t status = LoRa.modemStatus();
|
|
last_status_update = millis();
|
|
if (status & SIG_DETECT == 0x01) { stat_signal_detected = true; } else { stat_signal_detected = false; }
|
|
if (status & SIG_SYNCED == 0x01) { stat_signal_synced = true; } else { stat_signal_synced = false; }
|
|
if (status & RX_ONGOING == 0x01) { stat_rx_ongoing = true; } else { stat_rx_ongoing = false; }
|
|
|
|
if (stat_signal_detected || stat_signal_synced || stat_rx_ongoing) {
|
|
if (dcd_count < dcd_threshold) {
|
|
dcd_count++;
|
|
dcd = true;
|
|
} else {
|
|
dcd = true;
|
|
dcd_led = true;
|
|
}
|
|
} else {
|
|
if (dcd_count > 0) {
|
|
dcd_count--;
|
|
} else {
|
|
dcd_led = false;
|
|
}
|
|
dcd = false;
|
|
}
|
|
|
|
if (dcd_led) {
|
|
led_rx_on();
|
|
} else {
|
|
led_rx_off();
|
|
}
|
|
}
|
|
|
|
void checkModemStatus() {
|
|
if (millis()-last_status_update >= status_interval_ms) {
|
|
updateModemStatus();
|
|
}
|
|
}
|
|
|
|
void validateStatus() {
|
|
if (eeprom_lock_set()) {
|
|
if (eeprom_product_valid() && eeprom_model_valid() && eeprom_hwrev_valid()) {
|
|
if (eeprom_checksum_valid()) {
|
|
hw_ready = true;
|
|
|
|
if (eeprom_have_conf()) {
|
|
eeprom_conf_load();
|
|
op_mode = MODE_TNC;
|
|
startRadio();
|
|
}
|
|
}
|
|
} else {
|
|
hw_ready = false;
|
|
}
|
|
} else {
|
|
hw_ready = false;
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
if (radio_online) {
|
|
checkModemStatus();
|
|
if (outboundReady() && !SERIAL_READING) {
|
|
if (!dcd_waiting) updateModemStatus();
|
|
if (!dcd && !dcd_led) {
|
|
if (dcd_waiting) delay(lora_rx_turnaround_ms);
|
|
updateModemStatus();
|
|
if (!dcd) {
|
|
dcd_waiting = false;
|
|
#if QUEUE_SIZE > 0
|
|
processQueue();
|
|
#else
|
|
outbound_ready = false;
|
|
transmit(frame_len);
|
|
#endif
|
|
}
|
|
} else {
|
|
dcd_waiting = true;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
if (hw_ready) {
|
|
led_indicate_standby();
|
|
} else {
|
|
led_indicate_not_ready();
|
|
stopRadio();
|
|
}
|
|
}
|
|
|
|
if (Serial.available()) {
|
|
SERIAL_READING = true;
|
|
char sbyte = Serial.read();
|
|
serialCallback(sbyte);
|
|
last_serial_read = millis();
|
|
} else {
|
|
if (SERIAL_READING && millis()-last_serial_read >= serial_read_timeout_ms) {
|
|
SERIAL_READING = false;
|
|
}
|
|
}
|
|
}
|