// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see .
#include "Interfaces.h"
#include "ROM.h"
#ifndef BOARDS_H
#define BOARDS_H
#define PLATFORM_ESP32 0x80
#define PLATFORM_NRF52 0x70
#define MCU_ESP32 0x81
#define MCU_NRF52 0x71
// Products, boards and models. Grouped by manufacturer.
// Below are the original RNodes, sold by Mark Qvist.
#define PRODUCT_RNODE 0x03 // RNode devices
#define BOARD_RNODE 0x31 // Original v1.0 RNode
#define MODEL_A4 0xA4 // RNode v1.0, 433 MHz
#define MODEL_A9 0xA9 // RNode v1.0, 868 MHz
#define BOARD_RNODE_NG_20 0x40 // RNode hardware revision v2.0
#define MODEL_A3 0xA3 // RNode v2.0, 433 MHz
#define MODEL_A8 0xA8 // RNode v2.0, 868 MHz
#define BOARD_RNODE_NG_21 0x41 // RNode hardware revision v2.1
#define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
#define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
#define BOARD_T3S3 0x42 // T3S3 devices
#define MODEL_A1 0xA1 // T3S3, 433 MHz with SX1268
#define MODEL_A5 0xA5 // T3S3, 433 MHz with SX1278
#define MODEL_A6 0xA6 // T3S3, 868 MHz with SX1262
#define MODEL_AA 0xAA // T3S3, 868 MHz with SX1276
#define MODEL_AC 0xAC // T3S3, 2.4 GHz with SX1280 and PA
#define PRODUCT_TBEAM 0xE0 // T-Beam devices
#define BOARD_TBEAM 0x33
#define MODEL_E4 0xE4 // T-Beam SX1278, 433 Mhz
#define MODEL_E9 0xE9 // T-Beam SX1276, 868 Mhz
#define MODEL_E3 0xE3 // T-Beam SX1268, 433 Mhz
#define MODEL_E8 0xE8 // T-Beam SX1262, 868 Mhz
#define PRODUCT_TDECK_V1 0xD0 // T-Deck - sold by LilyGO
#define BOARD_TDECK 0x3B
#define MODEL_D4 0xD4 // LilyGO T-Deck, 433 MHz
#define MODEL_D9 0xD9 // LilyGO T-Deck, 868 MHz
#define PRODUCT_TBEAM_S_V1 0xEA // T-Beam Supreme - sold by LilyGO
#define BOARD_TBEAM_S_V1 0x3D
#define MODEL_DB 0xDB // LilyGO T-Beam Supreme, 433 MHz
#define MODEL_DC 0xDC // LilyGO T-Beam Supreme, 868 MHz
#define PRODUCT_T32_10 0xB2 // T3 v1.0 - sold by LilyGO
#define BOARD_LORA32_V1_0 0x39
#define MODEL_BA 0xBA // LilyGO T3 v1.0, 433 MHz
#define MODEL_BB 0xBB // LilyGO T3 v1.0, 868 MHz
#define PRODUCT_T32_20 0xB0 // T3 v2.0 - sold by LilyGO
#define BOARD_LORA32_V2_0 0x36
#define MODEL_B3 0xB3 // LilyGO T3 v2.0, 433 MHz
#define MODEL_B8 0xB8 // LilyGO T3 v2.0, 868 MHz
#define PRODUCT_T32_21 0xB1
#define BOARD_LORA32_V2_1 0x37
#define MODEL_B4 0xB4 // LilyGO T3 v2.1, 433 MHz
#define MODEL_B9 0xB9 // LilyGO T3 v2.1, 868 MHz
#define PRODUCT_H32_V2 0xC0 // Board code 0x38
#define BOARD_HELTEC32_V2 0x38
#define MODEL_C4 0xC4 // Heltec Lora32 v2, 433 MHz
#define MODEL_C9 0xC9 // Heltec Lora32 v2, 868 MHz
#define PRODUCT_H32_V3 0xC1
#define BOARD_HELTEC32_V3 0x3A
#define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
#define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
#define PRODUCT_H_W_PAPER 0xC3
#define BOARD_H_W_PAPER 0x3E
#define MODEL_C8 0xC8
#define PRODUCT_RAK4631 0x10 // RAK4631 - sold by RAKWireless
#define BOARD_RAK4631 0x51
#define MODEL_11 0x11 // RAK4631, 433 MHz
#define MODEL_12 0x12 // RAK4631, 868 MHz
#define MODEL_13 0x13 // RAK4631, 433MHz with WisBlock SX1280 module (LIBSYS002)
#define MODEL_14 0x14 // RAK4631, 868/915 MHz with WisBlock SX1280 module (LIBSYS002)
#define PRODUCT_OPENCOM_XL 0x20 // openCom XL - sold by Liberated Embedded Systems
#define BOARD_OPENCOM_XL 0x52
#define MODEL_21 0x21 // openCom XL, 868/915 MHz
#define BOARD_E22_ESP32 0x45 // Custom Ebyte E22 board design for meshtastic, source:
// https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf
#define PRODUCT_HELTEC_T114 0xC2 // Heltec Mesh Node T114
#define BOARD_HELTEC_T114 0x3C
#define MODEL_C6 0xC6 // Heltec Mesh Node T114, 470-510 MHz
#define MODEL_C7 0xC7 // Heltec Mesh Node T114, 863-928 MHz
#define PRODUCT_TECHO 0x15 // LilyGO T-Echo devices
#define BOARD_TECHO 0x44
#define MODEL_16 0x16 // T-Echo 433 MHz
#define MODEL_17 0x17 // T-Echo 868/915 MHz
#define PRODUCT_HMBRW 0xF0
#define BOARD_HMBRW 0x32
#define BOARD_HUZZAH32 0x34
#define BOARD_GENERIC_ESP32 0x35
#define BOARD_GENERIC_NRF52 0x50
#define MODEL_FE 0xFE // Homebrew board, max 17dBm output power
#define MODEL_FF 0xFF // Homebrew board, max 14dBm output power
// Displays
#define OLED 0x01
#define EINK_BW 0x02
#define EINK_3C 0x03
#define MONO_OLED 0x04
#define TFT 0x05
#define ADAFRUIT_TFT 0x06
#if defined(ESP32)
#define PLATFORM PLATFORM_ESP32
#define MCU_VARIANT MCU_ESP32
#elif defined(NRF52840_XXAA) || defined(_VARIANT_PCA10056_)
#include
#define PLATFORM PLATFORM_NRF52
#define MCU_VARIANT MCU_NRF52
#else
#error "The firmware cannot be compiled for the selected MCU variant"
#endif
#define HAS_DISPLAY false
#define HAS_BLUETOOTH false
#define HAS_BLE false
#define HAS_TCXO false
#define HAS_PMU false
#define HAS_NP false
#define HAS_EEPROM false
#define HAS_INPUT false
#define HAS_SLEEP false
#define PIN_DISP_SLEEP -1
#define VALIDATE_FIRMWARE true
#if defined(ENABLE_TCXO)
#define HAS_TCXO true
#endif
#if MCU_VARIANT == MCU_ESP32
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_0_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 1024
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define GPS_BAUD_RATE 9600
#define PIN_GPS_TX 12
#define PIN_GPS_RX 34
#if BOARD_MODEL == BOARD_GENERIC_ESP32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_led_rx = 14;
const int pin_led_tx = 32;
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
4, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
39, // pin_dio
36, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_TBEAM
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_PMU true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_SD false
#define HAS_EEPROM true
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
#define INTERFACE_COUNT 1
#define HAS_INPUT true
const int pin_btn_usr1 = 38;
const int pin_led_rx = 2;
const int pin_led_tx = 4;
#if BOARD_VARIANT == MODEL_E4 || BOARD_VARIANT == MODEL_E9
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_E3 || BOARD_VARIANT == MODEL_E8
#define OCP_TUNED 0x38
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
32, // pin_busy
33, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
#elif BOARD_MODEL == BOARD_HUZZAH32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_led_rx = 14;
const int pin_led_tx = 32;
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
4, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
39, // pin_dio
36, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_LORA32_V1_0
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_cs = 18;
const int pin_reset = 14;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 25;
const int pin_led_tx = 2;
#else
const int pin_led_rx = 2;
const int pin_led_tx = 2;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1276};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1276
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1276
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
14, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_LORA32_V2_0
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
14, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_LORA32_V2_1
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
#if HAS_TCXO == true
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
true, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
33 // pin_tcxo_enable
}
};
#endif
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#if HAS_TCXO == false
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
#elif BOARD_MODEL == BOARD_HELTEC32_V2
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
14, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_HELTEC32_V3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#define INTERFACE_COUNT 1
#define OCP_TUNED 0x38
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13;
const int pin_led_tx = 14;
#else
const int pin_led_rx = 35;
const int pin_led_tx = 35;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
8, // pin_ss
9, // pin_sclk
10, // pin_mosi
11, // pin_miso
13, // pin_busy
14, // pin_dio
12, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_H_W_PAPER
// Heltec Wireless Paper. Basically the Heltec LoRa32 v3 with an eink display.
// TODO, need to confirm that the display is a 213BN
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define HAS_DISPLAY true
#define DISPLAY EINK_BW
#define DISPLAY_SCALE_OVERRIDE true
#define DISPLAY_SCALE 1.90625
#define DISPLAY_MODEL GxEPD2_213_BN
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#define INTERFACE_COUNT 1
#define OCP_TUNED 0x38
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13;
const int pin_led_tx = 14;
#else
const int pin_led_rx = 35;
const int pin_led_tx = 35;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
8, // pin_ss
9, // pin_sclk
10, // pin_mosi
11, // pin_miso
13, // pin_busy
14, // pin_dio
12, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
const int pin_disp_cs = 4;
const int pin_disp_dc = 5;
const int pin_disp_reset = 6;
const int pin_disp_busy = 7;
const int pin_disp_en = 45;
#elif BOARD_MODEL == BOARD_RNODE_NG_20
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_NP true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
const int pin_np = 4;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1276};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1276
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1276
{
8, // pin_ss
9, // pin_sclk
10, // pin_mosi
11, // pin_miso
13, // pin_busy
14, // pin_dio
12, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_RNODE_NG_21
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_PMU true
#define HAS_NP true
#define HAS_SD false
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_np = 12;
const int pin_dac = 25;
const int pin_adc = 34;
const int SD_MISO = 2;
const int SD_MOSI = 15;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 12;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
// todo ce-ise all boards below here
#elif BOARD_MODEL == BOARD_T3S3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_CONSOLE true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#define INTERFACE_COUNT 1
const int pin_btn_usr1 = 0;
#if BOARD_VARIANT == MODEL_A1
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
7, // pin_ss
5, // pin_sclk
6, // pin_mosi
3, // pin_miso
34, // pin_busy
33, // pin_dio
8, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_AC // SX1280 with PA
//#define CONFIG_UART_BUFFER_SIZE 40000
//#define CONFIG_QUEUE_0_SIZE 40000
#define CONFIG_QUEUE_0_SIZE 6144
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1280
{
false, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1280
{
7, // pin_ss
5, // pin_sclk
6, // pin_mosi
3, // pin_miso
36, // pin_busy
9, // pin_dio
8, // pin_reset
10, // pin_txen
21, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
const int pin_np = 38;
const int pin_dac = 25;
const int pin_adc = 1;
const int SD_MISO = 2;
const int SD_MOSI = 11;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#endif
#endif
#elif BOARD_MODEL == BOARD_TDECK
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY false
const int pin_poweron = 10;
const int pin_btn_usr1 = 0;
const int pin_cs = 9;
const int pin_reset = 17;
const int pin_sclk = 40;
const int pin_mosi = 41;
const int pin_miso = 38;
const int pin_tcxo_enable = -1;
const int pin_dio = 45;
const int pin_busy = 13;
const int SD_MISO = 38;
const int SD_MOSI = 41;
const int SD_CLK = 40;
const int SD_CS = 39;
const int DISPLAY_DC = 11;
const int DISPLAY_CS = 12;
const int DISPLAY_MISO = 38;
const int DISPLAY_MOSI = 41;
const int DISPLAY_CLK = 40;
const int DISPLAY_BL_PIN = 42;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define OCP_TUNED 0x38
#define HAS_DISPLAY true
#define HAS_CONSOLE true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP false
#define PMU_IRQ 40
#define I2C_SCL 41
#define I2C_SDA 42
const int pin_btn_usr1 = 0;
const int pin_cs = 10;
const int pin_reset = 5;
const int pin_sclk = 12;
const int pin_mosi = 11;
const int pin_miso = 13;
const int pin_tcxo_enable = -1;
const int pin_dio = 1;
const int pin_busy = 4;
const int SD_MISO = 37;
const int SD_MOSI = 35;
const int SD_CLK = 36;
const int SD_CS = 47;
const int IMU_CS = 34;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#if BOARD_VARIANT == MODEL_A1
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
7, // pin_ss
5, // pin_sclk
6, // pin_mosi
3, // pin_miso
34, // pin_busy
33, // pin_dio
8, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_AC // SX1280 with PA
#define CONFIG_UART_BUFFER_SIZE 40000
#define CONFIG_QUEUE_0_SIZE 40000
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1280
{
false, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1280
{
7, // pin_ss
5, // pin_sclk
6, // pin_mosi
3, // pin_miso
36, // pin_busy
9, // pin_dio
8, // pin_reset
10, // pin_txen
21, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
#elif BOARD_MODEL == BOARD_E22_ESP32
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_BLE true
#define HAS_CONSOLE true
#define HAS_SD false
#define HAS_EEPROM true
#define I2C_SDA 21
#define I2C_SCL 22
#define INTERFACE_COUNT 1
const int pin_led_rx = 2;
const int pin_led_tx = 4;
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
18, // pin_ss
5, // pin_sclk
27, // pin_mosi
19, // pin_miso
32, // pin_busy
33, // pin_dio
23, // pin_reset
-1, // pin_txen
14, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_TDECK
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY false
#define HAS_CONSOLE false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_poweron = 10;
const int pin_btn_usr1 = 0;
const int pin_cs = 9;
const int pin_reset = 17;
const int pin_sclk = 40;
const int pin_mosi = 41;
const int pin_miso = 38;
const int pin_tcxo_enable = -1;
const int pin_dio = 45;
const int pin_busy = 13;
const int SD_MISO = 38;
const int SD_MOSI = 41;
const int SD_CLK = 40;
const int SD_CS = 39;
const int DISPLAY_DC = 11;
const int DISPLAY_CS = 12;
const int DISPLAY_MISO = 38;
const int DISPLAY_MOSI = 41;
const int DISPLAY_CLK = 40;
const int DISPLAY_BL_PIN = 42;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY true
#define HAS_CONSOLE true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP false
#define PMU_IRQ 40
#define I2C_SCL 41
#define I2C_SDA 42
const int pin_btn_usr1 = 0;
const int pin_cs = 10;
const int pin_reset = 5;
const int pin_sclk = 12;
const int pin_mosi = 11;
const int pin_miso = 13;
const int pin_tcxo_enable = -1;
const int pin_dio = 1;
const int pin_busy = 4;
const int SD_MISO = 37;
const int SD_MOSI = 35;
const int SD_CLK = 36;
const int SD_CS = 47;
const int IMU_CS = 34;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#endif
#elif MCU_VARIANT == MCU_NRF52
#if BOARD_MODEL == BOARD_TECHO
#define _PINNUM(port, pin) ((port) * 32 + (pin))
#define HAS_INPUT true
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define HAS_EEPROM false
#define HAS_SD false
#define HAS_DISPLAY true
#define DISPLAY EINK_BW
#define DISPLAY_MODEL GxEPD2_154_D67
#define BLE_MANUFACTURER "LilyGO"
#define BLE_MODEL "T-Echo"
#define HAS_CONSOLE false
#define HAS_BLE true
#define HAS_PMU true
#define CONFIG_UART_BUFFER_SIZE 32768
#define CONFIG_QUEUE_0_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define INTERFACE_COUNT 1
//#define I2C_SDA 26
//#define I2C_SCL 27
#define CONFIG_QUEUE_1_SIZE 40000
#define HAS_BACKLIGHT true
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
24, // pin_ss
19, // pin_sclk
22, // pin_mosi
23, // pin_miso
17, // pin_busy
20, // pin_dio
25, // pin_reset
-1, // pin_txen
-1, // pin_rxen
21 // pin_tcxo_enable
}
};
const int pin_disp_cs = 30;
const int pin_disp_dc = 28;
const int pin_disp_reset = 2;
const int pin_disp_busy = 3;
const int pin_disp_en = 43;
const int pin_disp_sck = 31;
const int pin_disp_mosi = 29;
const int pin_disp_miso = -1;
//#define GPS_BAUD_RATE 115200
//#define PIN_GPS_TX 41
//#define PIN_GPS_RX 40
const int pin_btn_usr1 = _PINNUM(1, 10);
const int pin_btn_touch = _PINNUM(0, 11);
const int pin_backlight = 43;
#define LED_ON LOW
#define LED_OFF HIGH
#define PIN_LED_GREEN _PINNUM(1, 1)
#define PIN_LED_RED _PINNUM(1, 3)
#define PIN_LED_BLUE _PINNUM(0, 14)
#define PIN_VEXT_EN _PINNUM(0, 12)
const int pin_led_rx = PIN_LED_BLUE;
const int pin_led_tx = PIN_LED_RED;
#elif BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_OPENCOM_XL
#define HAS_EEPROM false
#define HAS_DISPLAY false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_0_SIZE 6144
#define HAS_INPUT true
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define BLE_MANUFACTURER "RAK Wireless"
#define BLE_MODEL "RAK4640"
#if BOARD_VARIANT == MODEL_11 || BOARD_VARIANT == MODEL_12
#define INTERFACE_COUNT 1
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
42, // pin_ss
43, // pin_sclk
44, // pin_mosi
45, // pin_miso
46, // pin_busy
47, // pin_dio
38, // pin_reset
-1, // pin_txen
37, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_13 || BOARD_VARIANT == MODEL_14 || BOARD_VARIANT == MODEL_21
#define HAS_DISPLAY true
#define DISPLAY EINK_BW
#define DISPLAY_SCALE_OVERRIDE true
#define DISPLAY_SCALE 1.90625
#define DISPLAY_MODEL GxEPD2_213_BN
#define INTERFACE_COUNT 2
#define CONFIG_QUEUE_1_SIZE 40000
#define CONFIG_UART_BUFFER_SIZE 40000 // \todo, does it have to be this big?
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262, SX1280};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
// SX1280
{
true, // DEFAULT_SPI
false,// HAS_TCXO
false // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
42, // pin_ss
43, // pin_sclk
44, // pin_mosi
45, // pin_miso
46, // pin_busy
47, // pin_dio
38, // pin_reset
-1, // pin_txen
37, // pin_rxen
-1 // pin_tcxo_enable
},
// SX1280
{
24, // pin_ss
3, // pin_sclk
30, // pin_mosi
29, // pin_miso
25, // pin_busy
15, // pin_dio
16, // pin_reset
20, // pin_txen
19, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
const int pin_disp_cs = SS;
const int pin_disp_dc = WB_IO1;
const int pin_disp_reset = -1;
const int pin_disp_busy = WB_IO4;
const int pin_disp_en = WB_IO2;
const int pin_btn_usr1 = 9;
const int pin_led_rx = LED_BLUE;
const int pin_led_tx = LED_GREEN;
#elif BOARD_MODEL == BOARD_TECHO
#define _PINNUM(port, pin) ((port) * 32 + (pin))
#define MODEM SX1262
#define HAS_EEPROM false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_TCXO true
#define HAS_BUSY true
#define HAS_INPUT true
#define HAS_SLEEP true
#define BLE_MANUFACTURER "LilyGO"
#define BLE_MODEL "T-Echo"
#define HAS_INPUT true
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define CONFIG_UART_BUFFER_SIZE 32768
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define HAS_DISPLAY true
#define DISPLAY EINK_BW
#define HAS_BACKLIGHT true
#define DISPLAY_SCALE 1
#define LED_ON LOW
#define LED_OFF HIGH
#define PIN_LED_GREEN _PINNUM(1, 1)
#define PIN_LED_RED _PINNUM(1, 3)
#define PIN_LED_BLUE _PINNUM(0, 14)
#define PIN_VEXT_EN _PINNUM(0, 12)
const int pin_disp_cs = 30;
const int pin_disp_dc = 28;
const int pin_disp_reset = 2;
const int pin_disp_busy = 3;
const int pin_disp_en = -1;
const int pin_disp_sck = 31;
const int pin_disp_mosi = 29;
const int pin_disp_miso = -1;
const int pin_backlight = 43;
const int pin_btn_usr1 = _PINNUM(1, 10);
const int pin_btn_touch = _PINNUM(0, 11);
const int pin_reset = 25;
const int pin_cs = 24;
const int pin_sclk = 19;
const int pin_mosi = 22;
const int pin_miso = 23;
const int pin_busy = 17;
const int pin_dio = 20;
const int pin_tcxo_enable = 21;
const int pin_led_rx = PIN_LED_BLUE;
const int pin_led_tx = PIN_LED_RED;
#elif BOARD_MODEL == BOARD_HELTEC_T114
#define MODEM SX1262
#define HAS_EEPROM false
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU true
#define HAS_NP true
#define HAS_SD false
#define HAS_TCXO true
#define HAS_BUSY true
#define HAS_INPUT true
#define HAS_SLEEP true
#define DIO2_AS_RF_SWITCH true
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define BLE_MANUFACTURER "Heltec"
#define BLE_MODEL "T114"
#define PIN_T114_ADC_EN 6
#define PIN_VEXT_EN 21
// LED
#define LED_T114_GREEN 3
#define PIN_T114_LED 14
#define NP_M 1
const int pin_np = PIN_T114_LED;
// SPI
#define PIN_T114_MOSI 22
#define PIN_T114_MISO 23
#define PIN_T114_SCK 19
#define PIN_T114_SS 24
// SX1262
#define PIN_T114_RST 25
#define PIN_T114_DIO1 20
#define PIN_T114_BUSY 17
// TFT
#define DISPLAY_SCALE_OVERRIDE true
#define DISPLAY_SCALE 2
#define PIN_T114_TFT_MOSI 9
#define PIN_T114_TFT_MISO 11 // not connected
#define PIN_T114_TFT_SCK 8
#define PIN_T114_TFT_SS 11
#define PIN_T114_TFT_DC 12
#define PIN_T114_TFT_RST 2
#define PIN_T114_TFT_EN 3
#define PIN_T114_TFT_BLGT 15
// pins for buttons on Heltec T114
const int pin_btn_usr1 = 42;
// pins for sx1262 on Heltec T114
const int pin_reset = PIN_T114_RST;
const int pin_cs = PIN_T114_SS;
const int pin_sclk = PIN_T114_SCK;
const int pin_mosi = PIN_T114_MOSI;
const int pin_miso = PIN_T114_MISO;
const int pin_busy = PIN_T114_BUSY;
const int pin_dio = PIN_T114_DIO1;
const int pin_led_rx = 35;
const int pin_led_tx = 35;
const int pin_tcxo_enable = -1;
// pins for ST7789 display on Heltec T114
const int DISPLAY_DC = PIN_T114_TFT_DC;
const int DISPLAY_CS = PIN_T114_TFT_SS;
const int DISPLAY_MISO = PIN_T114_TFT_MISO;
const int DISPLAY_MOSI = PIN_T114_TFT_MOSI;
const int DISPLAY_CLK = PIN_T114_TFT_SCK;
const int DISPLAY_BL_PIN = PIN_T114_TFT_BLGT;
const int DISPLAY_RST = PIN_T114_TFT_RST;
#else
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
#endif
#endif
#ifndef DISPLAY_SCALE
#define DISPLAY_SCALE 1
#endif
#ifndef HAS_BUSY
const int pin_busy = -1;
#endif
#ifndef LED_ON
#define LED_ON HIGH
#endif
#ifndef LED_OFF
#define LED_OFF LOW
#endif
// Default OCP value if not specified
// in board configuration
#ifndef OCP_TUNED
#define OCP_TUNED 0x38
#endif
#ifndef NP_M
#define NP_M 0.15
#endif
#endif