From e9660ae5952784ff68784e1741d459ee155cc3ba Mon Sep 17 00:00:00 2001
From: "jacob.eva" <x00010@disroot.org>
Date: Tue, 11 Feb 2025 18:24:13 +0000
Subject: [PATCH] Add new modem TX IRQ handling

---
 RNode_Firmware_CE.ino |  3 +++
 src/misc/ModemISR.h   | 45 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 src/misc/ModemISR.h

diff --git a/RNode_Firmware_CE.ino b/RNode_Firmware_CE.ino
index f32ae50..1904e87 100644
--- a/RNode_Firmware_CE.ino
+++ b/RNode_Firmware_CE.ino
@@ -66,6 +66,9 @@ volatile uint16_t queued_bytes[INTERFACE_COUNT] = {0};
 volatile uint16_t queue_cursor[INTERFACE_COUNT] = {0};
 volatile uint16_t current_packet_start[INTERFACE_COUNT] = {0};
 volatile bool serial_buffering = false;
+
+extern void setup_interfaces(); // from /src/misc/ModemISR.h
+
 #if HAS_BLUETOOTH || HAS_BLE == true
   bool bt_init_ran = false;
 #endif
diff --git a/src/misc/ModemISR.h b/src/misc/ModemISR.h
new file mode 100644
index 0000000..5f1f374
--- /dev/null
+++ b/src/misc/ModemISR.h
@@ -0,0 +1,45 @@
+extern RadioInterface* interface_obj[INTERFACE_COUNT];
+void (*onIntRise[INTERFACE_COUNT]) (void);
+
+#if INTERFACE_COUNT == 1
+void onInt0Rise() {
+    if (interfaces[0] == SX1280) {
+        // On the SX1280, there is a bug which can cause the busy line
+        // to remain high if a high amount of packets are received when
+        // in continuous RX mode. This is documented as Errata 16.1 in
+        // the SX1280 datasheet v3.2 (page 149)
+        // Therefore, the modem is set into receive mode each time a packet is received.
+        interface_obj[0]->receive();
+    }
+    if (interface_obj[0]->getPacketValidity()) {
+        interface_obj[0]->handleDio0Rise();
+    }
+}
+
+void setup_interfaces() {
+    onIntRise[0] = onInt0Rise;
+}
+#elif BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_OPENCOM_XL
+void onInt0Rise() {
+    if (interface_obj[0]->getPacketValidity()) {
+        interface_obj[0]->handleDio0Rise();
+    }
+}
+
+void onInt1Rise() {
+    // On the SX1280, there is a bug which can cause the busy line
+    // to remain high if a high amount of packets are received when
+    // in continuous RX mode. This is documented as Errata 16.1 in
+    // the SX1280 datasheet v3.2 (page 149)
+    // Therefore, the modem is set into receive mode each time a packet is received.
+    interface_obj[1]->receive();
+    if (interface_obj[1]->getPacketValidity()) {
+        interface_obj[1]->handleDio0Rise();
+    }
+}
+
+void setup_interfaces() {
+    onIntRise[0] = &onInt0Rise;
+    onIntRise[1] = &onInt1Rise;
+}
+#endif