mirror of
https://github.com/liberatedsystems/RNode_Firmware_CE.git
synced 2024-12-25 07:29:25 -05:00
Merge branch 'make_fixes'
This commit is contained in:
jacob.eva
commit
4f20c591ec
40
Boards.h
40
Boards.h
@ -40,6 +40,7 @@
|
||||
#define BOARD_RNODE_NG_21 0x41
|
||||
#define BOARD_T3S3 0x42
|
||||
#define BOARD_TECHO 0x43
|
||||
#define BOARD_E22_ESP32 0x44
|
||||
#define BOARD_GENERIC_NRF52 0x50
|
||||
#define BOARD_RAK4631 0x51
|
||||
|
||||
@ -625,6 +626,45 @@
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
|
||||
#elif BOARD_MODEL == BOARD_E22_ESP32
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define INTERFACE_COUNT 1
|
||||
const int pin_led_rx = 2;
|
||||
const int pin_led_tx = 4;
|
||||
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX1262
|
||||
{
|
||||
true, // DEFAULT_SPI
|
||||
true, // HAS_TCXO
|
||||
true // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
||||
// SX1262
|
||||
{
|
||||
18, // pin_ss
|
||||
5, // pin_sclk
|
||||
27, // pin_mosi
|
||||
19, // pin_miso
|
||||
32, // pin_busy
|
||||
33, // pin_dio
|
||||
23, // pin_reset
|
||||
-1, // pin_txen
|
||||
14, // pin_rxen
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
#else
|
||||
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
|
||||
#endif
|
||||
|
||||
159
Makefile
159
Makefile
@ -15,34 +15,41 @@
|
||||
|
||||
ESP_IDF_VER = 2.0.17
|
||||
|
||||
V ?= 0
|
||||
VFLAG =
|
||||
ifeq "$(V)" "1"
|
||||
VFLAG =-v
|
||||
endif
|
||||
|
||||
COMMON_BUILD_FLAGS = $(VFLAG) -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152"
|
||||
COMMON_ESP_UPLOAD_FlAGS = $(VFLAG) --chip esp32 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000
|
||||
|
||||
all: release
|
||||
|
||||
clean:
|
||||
-rm -r ./build
|
||||
-rm ./Release/rnode_firmware*
|
||||
-rm -rf ./build
|
||||
-rm -f ./Release/rnode_firmware*
|
||||
|
||||
prep: prep-esp32 prep-samd
|
||||
prep: prep-esp32 prep-nrf
|
||||
|
||||
prep-index:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
|
||||
prep-esp32:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install esp32:esp32@2.0.17 --config-file arduino-cli.yaml
|
||||
arduino-cli core install esp32:esp32@$(ESP_IDF_VER) --config-file arduino-cli.yaml
|
||||
arduino-cli lib install "Adafruit SSD1306"
|
||||
arduino-cli lib install "XPowersLib"
|
||||
arduino-cli lib install "Crypto"
|
||||
arduino-cli lib install "Adafruit NeoPixel"
|
||||
pip install pyserial rns --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
||||
|
||||
prep-samd:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install adafruit:samd --config-file arduino-cli.yaml
|
||||
|
||||
prep-nrf:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml
|
||||
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
|
||||
arduino-cli lib install "Crypto"
|
||||
arduino-cli lib install "Adafruit GFX Library"
|
||||
arduino-cli lib install "GxEPD2"
|
||||
pip install pyserial rns --upgrade --user --break-system-packages
|
||||
pip install pyserial rns --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
||||
pip install adafruit-nrfutil --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
||||
|
||||
console-site:
|
||||
@ -55,137 +62,141 @@ spiffs-image:
|
||||
|
||||
upload-spiffs:
|
||||
@echo Deploying SPIFFS image...
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin
|
||||
|
||||
firmware: $(shell grep ^firmware- Makefile | cut -d: -f1)
|
||||
|
||||
firmware-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
|
||||
firmware-tbeam_sx126x:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
|
||||
firmware-techo: firmware-techo4 firmware-techo9
|
||||
|
||||
firmware-techo4:
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\""
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\""
|
||||
|
||||
firmware-techo9:
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\""
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\""
|
||||
|
||||
firmware-t3s3_sx1262:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
|
||||
|
||||
firmware-t3s3_sx1280_pa:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\""
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\""
|
||||
|
||||
firmware-e22_esp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
|
||||
firmware-lora32_v10_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
|
||||
firmware-lora32_v21_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v21_tcxo:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
|
||||
firmware-heltec32_v2:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
|
||||
firmware-heltec32_v2_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-heltec32_v3:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
|
||||
firmware-rnode_ng_20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
|
||||
firmware-rnode_ng_21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
|
||||
firmware-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
|
||||
firmware-genericesp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
|
||||
firmware-rak4631:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
|
||||
firmware-rak4631_sx1280:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
|
||||
firmware-freenode:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
|
||||
|
||||
upload-tbeam:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:t-beam
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FLAGS) ./Release/console_image.bin
|
||||
|
||||
upload-techo:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn adafruit:nrf52:pca10056
|
||||
unzip -o build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.zip -d build/adafruit.nrf52.pca10056
|
||||
#rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
../Reticulum/RNS/Utilities/rnodeconf.py $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
|
||||
upload-lora32_v10:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
upload-lora32_v20:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
upload-lora32_v21:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
upload-heltec32_v2:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V2
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
upload-heltec32_v3:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V3
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32-s3 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) --chip esp32-s3 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-rnode_ng_20:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
upload-rnode_ng_21:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
upload-t3s3:
|
||||
@echo
|
||||
@ -205,22 +216,29 @@ upload-featheresp32:
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin
|
||||
|
||||
upload-rak4631:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn rakwireless:nrf52:WisCoreRAK4631Board
|
||||
unzip -o build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.zip -d build/rakwireless.nrf52.WisCoreRAK4631Board
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
|
||||
upload-e22_esp32:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:esp32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
|
||||
release: release-all
|
||||
|
||||
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes
|
||||
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-e22_esp32 release-hashes
|
||||
|
||||
release-hashes:
|
||||
python3 ./release_hashes.py > ./Release/release.json
|
||||
|
||||
release-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin build/rnode_firmware_tbeam.bin
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader
|
||||
@ -229,7 +247,7 @@ release-tbeam:
|
||||
rm -r build
|
||||
|
||||
release-tbeam_sx1262:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin build/rnode_firmware_tbeam_sx1262.bin
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader
|
||||
@ -238,7 +256,7 @@ release-tbeam_sx1262:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v10.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
||||
@ -247,7 +265,7 @@ release-lora32_v10:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
||||
@ -256,7 +274,7 @@ release-lora32_v20:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
@ -265,7 +283,7 @@ release-lora32_v21:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v10_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v10.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
||||
@ -274,7 +292,7 @@ release-lora32_v10_extled:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v20_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
||||
@ -283,7 +301,7 @@ release-lora32_v20_extled:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v21_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
@ -292,7 +310,7 @@ release-lora32_v21_extled:
|
||||
rm -r build
|
||||
|
||||
release-lora32_v21_tcxo:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21_tcxo.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21_tcxo.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21_tcxo.bootloader
|
||||
@ -301,7 +319,7 @@ release-lora32_v21_tcxo:
|
||||
rm -r build
|
||||
|
||||
release-heltec32_v2:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
@ -310,7 +328,7 @@ release-heltec32_v2:
|
||||
rm -r build
|
||||
|
||||
release-heltec32_v3:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v3.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader
|
||||
@ -319,7 +337,7 @@ release-heltec32_v3:
|
||||
rm -r build
|
||||
|
||||
release-heltec32_v2_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
@ -328,7 +346,7 @@ release-heltec32_v2_extled:
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_ng20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
|
||||
@ -337,7 +355,7 @@ release-rnode_ng_20:
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_ng21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
|
||||
@ -346,7 +364,7 @@ release-rnode_ng_21:
|
||||
rm -r build
|
||||
|
||||
release-t3s3:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin build/rnode_firmware_t3s3.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader
|
||||
@ -354,8 +372,17 @@ release-t3s3:
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
|
||||
rm -r build
|
||||
|
||||
release-e22_esp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_e22.boot_app0
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_e22.bin
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_e22.bootloader
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_esp32_e22.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_esp32_e22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_e22.boot_app0 build/rnode_firmware_esp32_e22.bin build/rnode_firmware_esp32_e22.bootloader build/rnode_firmware_esp32_e22.partitions
|
||||
rm -r build
|
||||
|
||||
release-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
|
||||
cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_featheresp32.bin
|
||||
cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader
|
||||
@ -364,7 +391,7 @@ release-featheresp32:
|
||||
rm -r build
|
||||
|
||||
release-genericesp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_generic.bin
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader
|
||||
@ -373,16 +400,16 @@ release-genericesp32:
|
||||
rm -r build
|
||||
|
||||
release-rak4631:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip
|
||||
|
||||
release-rak4631_sx1280:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631_sx1280.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631_sx1280.hex Release/rnode_firmware_rak4631_sx1280.zip
|
||||
|
||||
release-freenode:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_freenode.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_freenode.hex Release/rnode_firmware_freenode.zip
|
||||
|
||||
@ -142,6 +142,11 @@ uint8_t boot_vector = 0x00;
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_E22_ESP32
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
board_manager:
|
||||
additional_urls:
|
||||
- https://adafruit.github.io/arduino-board-index/package_adafruit_index.json
|
||||
- https://liberatedsystems.co.uk/rnode-firmware-ce/esp-custom-package.json
|
||||
- https://raw.githubusercontent.com/RAKwireless/RAKwireless-Arduino-BSP-Index/main/package_rakwireless_index.json
|
||||
- http://unsigned.io/arduino/package_unsignedio_UnsignedBoards_index.json
|
||||
|
||||
Loading…
Reference in New Issue
Block a user