Add multiple interface support

This commit is contained in:
jacob.eva 2024-06-10 13:05:21 +01:00
parent ebdec7f3e0
commit 3f8d012457
No known key found for this signature in database
GPG key ID: 0B92E083BBCCAA1E
18 changed files with 4314 additions and 3899 deletions

View file

@ -43,7 +43,7 @@
#define M_FRQ_S 27388122
#define M_FRQ_R 27388061
bool console_active = false;
bool modem_installed = false;
bool modems_installed = false;
#define MTU 508
#define SINGLE_MTU 255
@ -51,13 +51,10 @@
#define MIN_L 1
#define CMD_L 64
bool mw_radio_online = false;
#define eeprom_addr(a) (a+EEPROM_OFFSET)
#if (MODEM == SX1262 || MODEM == SX1280) && defined(NRF52840_XXAA)
SPIClass spiModem(NRF_SPIM2, pin_miso, pin_sclk, pin_mosi);
#endif
#define PA_OUTPUT_RFO_PIN 0
#define PA_OUTPUT_PA_BOOST_PIN 1
// MCU independent configuration parameters
const long serial_baudrate = 115200;
@ -66,36 +63,15 @@
// packet RSSI register
const int rssi_offset = 157;
// Default LoRa settings
const int lora_rx_turnaround_ms = 66;
const int lora_post_tx_yield_slots = 6;
uint32_t post_tx_yield_timeout = 0;
#define LORA_PREAMBLE_SYMBOLS_HW 4
#define LORA_PREAMBLE_SYMBOLS_MIN 18
#define LORA_PREAMBLE_TARGET_MS 15
#define LORA_CAD_SYMBOLS 3
int csma_slot_ms = 50;
float csma_p_min = 0.1;
float csma_p_max = 0.8;
uint8_t csma_p = 0;
int lora_sf = 0;
int lora_cr = 5;
int lora_txp = 0xFF;
uint32_t lora_bw = 0;
uint32_t lora_freq = 0;
uint32_t lora_bitrate = 0;
long lora_preamble_symbols = 6;
float lora_symbol_time_ms = 0.0;
float lora_symbol_rate = 0.0;
float lora_us_per_byte = 0.0;
// Default LoRa settings
const int lora_rx_turnaround_ms = 66;
const int lora_post_tx_yield_slots = 6;
#define LORA_CAD_SYMBOLS 3
// Operational variables
bool radio_locked = true;
bool radio_online = false;
bool community_fw = true;
bool hw_ready = false;
bool radio_error = false;
bool disp_ready = false;
bool pmu_ready = false;
bool promisc = false;
@ -106,7 +82,6 @@
uint8_t model = 0x00;
uint8_t hwrev = 0x00;
int current_rssi = -292;
int last_rssi = -292;
uint8_t last_rssi_raw = 0x00;
uint8_t last_snr_raw = 0x80;
@ -125,49 +100,6 @@
uint32_t stat_rx = 0;
uint32_t stat_tx = 0;
#define STATUS_INTERVAL_MS 3
#if MCU_VARIANT == MCU_ESP32 || MCU_VARIANT == MCU_NRF52
#define DCD_SAMPLES 2500
#define UTIL_UPDATE_INTERVAL_MS 1000
#define UTIL_UPDATE_INTERVAL (UTIL_UPDATE_INTERVAL_MS/STATUS_INTERVAL_MS)
#define AIRTIME_LONGTERM 3600
#define AIRTIME_LONGTERM_MS (AIRTIME_LONGTERM*1000)
#define AIRTIME_BINLEN_MS (STATUS_INTERVAL_MS*DCD_SAMPLES)
#define AIRTIME_BINS ((AIRTIME_LONGTERM*1000)/AIRTIME_BINLEN_MS)
bool util_samples[DCD_SAMPLES];
uint16_t airtime_bins[AIRTIME_BINS];
float longterm_bins[AIRTIME_BINS];
int dcd_sample = 0;
float local_channel_util = 0.0;
float total_channel_util = 0.0;
float longterm_channel_util = 0.0;
float airtime = 0.0;
float longterm_airtime = 0.0;
#define current_airtime_bin(void) (millis()%AIRTIME_LONGTERM_MS)/AIRTIME_BINLEN_MS
#endif
float st_airtime_limit = 0.0;
float lt_airtime_limit = 0.0;
bool airtime_lock = false;
bool stat_signal_detected = false;
bool stat_signal_synced = false;
bool stat_rx_ongoing = false;
bool dcd = false;
bool dcd_led = false;
bool dcd_waiting = false;
long dcd_wait_until = 0;
uint16_t dcd_count = 0;
uint16_t dcd_threshold = 2;
uint32_t status_interval_ms = STATUS_INTERVAL_MS;
uint32_t last_status_update = 0;
uint32_t last_dcd = 0;
// Status flags
const uint8_t SIG_DETECT = 0x01;
const uint8_t SIG_SYNCED = 0x02;
const uint8_t RX_ONGOING = 0x04;
// Power management
#define BATTERY_STATE_DISCHARGING 0x01
#define BATTERY_STATE_CHARGING 0x02
@ -192,4 +124,10 @@
#define START_FROM_BROWNOUT 0x03
#define START_FROM_JTAG 0x04
// Subinterfaces
// select interface 0 by default
uint8_t interface = 0;
RadioInterface* selected_radio;
RadioInterface* interface_obj[INTERFACE_COUNT];
RadioInterface* interface_obj_sorted[INTERFACE_COUNT];
#endif