Git-Mirrors/RNode_Firmware
1
0
Fork 0
mirror of https://github.com/markqvist/RNode_Firmware.git synced 2024-12-27 00:19:43 -05:00
Code Issues Actions Packages Projects Releases Wiki Activity
960599c35a
RNode_Firmware/Boards.h
Mark Qvist bfc215b2a3 Fix T3S3 SX1262 dio pin and build config
2024-10-05 20:55:48 +02:00

618 lines
18 KiB
C
Raw Blame History

// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#include "Modem.h"
#ifndef BOARDS_H
#define BOARDS_H
#define PLATFORM_AVR 0x90
#define PLATFORM_ESP32 0x80
#define PLATFORM_NRF52 0x70
#define MCU_1284P 0x91
#define MCU_2560 0x92
#define MCU_ESP32 0x81
#define MCU_NRF52 0x71
// Products, boards and models ////
#define PRODUCT_RNODE 0x03 // RNode devices
#define BOARD_RNODE 0x31 // Original v1.0 RNode
#define MODEL_A4 0xA4 // RNode v1.0, 433 MHz
#define MODEL_A9 0xA9 // RNode v1.0, 868 MHz
#define BOARD_RNODE_NG_20 0x40 // RNode hardware revision v2.0
#define MODEL_A3 0xA3 // RNode v2.0, 433 MHz
#define MODEL_A8 0xA8 // RNode v2.0, 868 MHz
#define BOARD_RNODE_NG_21 0x41 // RNode hardware revision v2.1
#define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
#define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
#define BOARD_RNODE_NG_22 0x42 // RNode hardware revision v2.2 (T3S3)
#define MODEL_A1 0xA1 // RNode v2.2, 433 MHz with SX1268
#define MODEL_A5 0xA5 // RNode v2.2, 433 MHz with SX1278
#define MODEL_A6 0xA6 // RNode v2.2, 868 MHz with SX1262
#define MODEL_AA 0xAA // RNode v2.2, 868 MHz with SX1276
#define PRODUCT_TBEAM 0xE0 // T-Beam devices
#define BOARD_TBEAM 0x33
#define MODEL_E4 0xE4 // T-Beam SX1278, 433 Mhz
#define MODEL_E9 0xE9 // T-Beam SX1276, 868 Mhz
#define MODEL_E3 0xE3 // T-Beam SX1268, 433 Mhz
#define MODEL_E8 0xE8 // T-Beam SX1262, 868 Mhz
#define PRODUCT_TDECK_V1 0xD0
#define BOARD_TDECK 0x3B
#define MODEL_D4 0xD4 // LilyGO T-Deck, 433 MHz
#define MODEL_D9 0xD9 // LilyGO T-Deck, 868 MHz
#define PRODUCT_TBEAM_S_V1 0xEA
#define BOARD_TBEAM_S_V1 0x3D
#define MODEL_DB 0xDB // LilyGO T-Beam Supreme, 433 MHz
#define MODEL_DC 0xDC // LilyGO T-Beam Supreme, 868 MHz
#define PRODUCT_T32_10 0xB2
#define BOARD_LORA32_V1_0 0x39
#define MODEL_BA 0xBA // LilyGO T3 v1.0, 433 MHz
#define MODEL_BB 0xBB // LilyGO T3 v1.0, 868 MHz
#define PRODUCT_T32_20 0xB0
#define BOARD_LORA32_V2_0 0x36
#define MODEL_B3 0xB3 // LilyGO T3 v2.0, 433 MHz
#define MODEL_B8 0xB8 // LilyGO T3 v2.0, 868 MHz
#define PRODUCT_T32_21 0xB1
#define BOARD_LORA32_V2_1 0x37
#define MODEL_B4 0xB4 // LilyGO T3 v2.1, 433 MHz
#define MODEL_B9 0xB9 // LilyGO T3 v2.1, 868 MHz
#define PRODUCT_H32_V2 0xC0 // Board code 0x38
#define BOARD_HELTEC32_V2 0x38
#define MODEL_C4 0xC4 // Heltec Lora32 v2, 433 MHz
#define MODEL_C9 0xC9 // Heltec Lora32 v2, 868 MHz
#define PRODUCT_H32_V3 0xC1
#define BOARD_HELTEC32_V3 0x3A
#define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
#define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
#define PRODUCT_RAK4631 0x10
#define BOARD_RAK4631 0x51
#define MODEL_11 0x11 // RAK4631, 433 Mhz
#define MODEL_12 0x12 // RAK4631, 868 Mhz
#define PRODUCT_HMBRW 0xF0
#define BOARD_HMBRW 0x32
#define BOARD_HUZZAH32 0x34
#define BOARD_GENERIC_ESP32 0x35
#define BOARD_GENERIC_NRF52 0x50
#define MODEL_FE 0xFE // Homebrew board, max 17dBm output power
#define MODEL_FF 0xFF // Homebrew board, max 14dBm output power
#if defined(__AVR_ATmega1284P__)
#define PLATFORM PLATFORM_AVR
#define MCU_VARIANT MCU_1284P
#elif defined(__AVR_ATmega2560__)
#define PLATFORM PLATFORM_AVR
#define MCU_VARIANT MCU_2560
#elif defined(ESP32)
#define PLATFORM PLATFORM_ESP32
#define MCU_VARIANT MCU_ESP32
#elif defined(NRF52840_XXAA)
#include <variant.h>
#define PLATFORM PLATFORM_NRF52
#define MCU_VARIANT MCU_NRF52
#else
#error "The firmware cannot be compiled for the selected MCU variant"
#endif
#ifndef MODEM
#if BOARD_MODEL == BOARD_RAK4631
#define MODEM SX1262
#elif BOARD_MODEL == BOARD_GENERIC_NRF52
#define MODEM SX1262
#else
#define MODEM SX1276
#endif
#endif
#define HAS_DISPLAY false
#define HAS_BLUETOOTH false
#define HAS_BLE false
#define HAS_TCXO false
#define HAS_PMU false
#define HAS_NP false
#define HAS_EEPROM false
#define HAS_INPUT false
#define HAS_SLEEP false
#define PIN_DISP_SLEEP -1
#define VALIDATE_FIRMWARE true
#if defined(ENABLE_TCXO)
#define HAS_TCXO true
#endif
#if MCU_VARIANT == MCU_1284P
const int pin_cs = 4;
const int pin_reset = 3;
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
#define BOARD_MODEL BOARD_RNODE
#define HAS_EEPROM true
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#elif MCU_VARIANT == MCU_2560
const int pin_cs = 5;
const int pin_reset = 4;
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
#define BOARD_MODEL BOARD_HMBRW
#define HAS_EEPROM true
#define CONFIG_UART_BUFFER_SIZE 768
#define CONFIG_QUEUE_SIZE 5120
#define CONFIG_QUEUE_MAX_LENGTH 24
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#elif MCU_VARIANT == MCU_ESP32
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 1024
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define GPS_BAUD_RATE 9600
#define PIN_GPS_TX 12
#define PIN_GPS_RX 34
#if BOARD_MODEL == BOARD_GENERIC_ESP32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 4;
const int pin_reset = 36;
const int pin_dio = 39;
const int pin_led_rx = 14;
const int pin_led_tx = 32;
#elif BOARD_MODEL == BOARD_TBEAM
#define HAS_DISPLAY true
#define HAS_PMU true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_SD false
#define HAS_EEPROM true
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_led_rx = 2;
const int pin_led_tx = 4;
#if MODEM == SX1262
#define HAS_TCXO true
#define HAS_BUSY true
#define DIO2_AS_RF_SWITCH true
const int pin_busy = 32;
const int pin_dio = 33;
const int pin_tcxo_enable = -1;
#else
const int pin_dio = 26;
#endif
#elif BOARD_MODEL == BOARD_HUZZAH32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 4;
const int pin_reset = 36;
const int pin_dio = 39;
const int pin_led_rx = 14;
const int pin_led_tx = 32;
#elif BOARD_MODEL == BOARD_LORA32_V1_0
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 14;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 25;
const int pin_led_tx = 2;
#else
const int pin_led_rx = 2;
const int pin_led_tx = 2;
#endif
#elif BOARD_MODEL == BOARD_LORA32_V2_0
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
#elif BOARD_MODEL == BOARD_LORA32_V2_1
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
#if HAS_TCXO == true
const int pin_tcxo_enable = 33;
#endif
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#elif BOARD_MODEL == BOARD_HELTEC32_V2
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 14;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#elif BOARD_MODEL == BOARD_HELTEC32_V3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13;
const int pin_led_tx = 14;
#else
const int pin_led_rx = 35;
const int pin_led_tx = 35;
#endif
#define MODEM SX1262
#define HAS_TCXO true
const int pin_tcxo_enable = -1;
#define HAS_BUSY true
#define DIO2_AS_RF_SWITCH true
// Following pins are for the SX1262
const int pin_cs = 8;
const int pin_busy = 13;
const int pin_dio = 14;
const int pin_reset = 12;
const int pin_mosi = 10;
const int pin_miso = 11;
const int pin_sclk = 9;
#elif BOARD_MODEL == BOARD_RNODE_NG_20
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_NP true
#define HAS_CONSOLE true
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
const int pin_np = 4;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
#endif
#elif BOARD_MODEL == BOARD_RNODE_NG_21
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_PMU true
#define HAS_NP true
#define HAS_SD false
#define HAS_EEPROM true
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
const int pin_np = 12;
const int pin_dac = 25;
const int pin_adc = 34;
const int SD_MISO = 2;
const int SD_MOSI = 15;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 12;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#endif
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_CONSOLE false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_btn_usr1 = 0;
const int pin_cs = 7;
const int pin_reset = 8;
const int pin_sclk = 5;
const int pin_mosi = 6;
const int pin_miso = 3;
#if MODEM == SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
const int pin_busy = 34;
const int pin_dio = 33;
const int pin_tcxo_enable = -1;
#else
const int pin_dio = 9;
#endif
const int pin_np = 38;
const int pin_dac = 25;
const int pin_adc = 1;
const int SD_MISO = 2;
const int SD_MOSI = 11;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#endif
#endif
#elif BOARD_MODEL == BOARD_TDECK
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY false
#define HAS_CONSOLE false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_poweron = 10;
const int pin_btn_usr1 = 0;
const int pin_cs = 9;
const int pin_reset = 17;
const int pin_sclk = 40;
const int pin_mosi = 41;
const int pin_miso = 38;
const int pin_tcxo_enable = -1;
const int pin_dio = 45;
const int pin_busy = 13;
const int SD_MISO = 38;
const int SD_MOSI = 41;
const int SD_CLK = 40;
const int SD_CS = 39;
const int DISPLAY_DC = 11;
const int DISPLAY_CS = 12;
const int DISPLAY_MISO = 38;
const int DISPLAY_MOSI = 41;
const int DISPLAY_CLK = 40;
const int DISPLAY_BL_PIN = 42;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY true
#define HAS_CONSOLE true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP false
#define PMU_IRQ 40
#define I2C_SCL 41
#define I2C_SDA 42
const int pin_btn_usr1 = 0;
const int pin_cs = 10;
const int pin_reset = 5;
const int pin_sclk = 12;
const int pin_mosi = 11;
const int pin_miso = 13;
const int pin_tcxo_enable = -1;
const int pin_dio = 1;
const int pin_busy = 4;
const int SD_MISO = 37;
const int SD_MOSI = 35;
const int SD_CLK = 36;
const int SD_CS = 47;
const int IMU_CS = 34;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#else
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
#endif
#elif MCU_VARIANT == MCU_NRF52
#if BOARD_MODEL == BOARD_RAK4631
#define HAS_EEPROM false
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU false
#define HAS_NP false
#define HAS_SD false
#define HAS_TCXO true
#define HAS_RF_SWITCH_RX_TX true
#define HAS_BUSY true
#define HAS_INPUT true
#define DIO2_AS_RF_SWITCH true
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define BLE_MANUFACTURER "RAK Wireless"
#define BLE_MODEL "RAK4640"
const int pin_btn_usr1 = 9;
// Following pins are for the sx1262
const int pin_rxen = 37;
const int pin_reset = 38;
const int pin_cs = 42;
const int pin_sclk = 43;
const int pin_mosi = 44;
const int pin_miso = 45;
const int pin_busy = 46;
const int pin_dio = 47;
const int pin_led_rx = LED_BLUE;
const int pin_led_tx = LED_GREEN;
const int pin_tcxo_enable = -1;
#else
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
#endif
#endif
#ifndef HAS_RF_SWITCH_RX_TX
const int pin_rxen = -1;
const int pin_txen = -1;
#endif
#ifndef HAS_BUSY
const int pin_busy = -1;
#endif
#ifndef DIO2_AS_RF_SWITCH
#define DIO2_AS_RF_SWITCH false
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink