mirror of
https://github.com/markqvist/RNode_Firmware.git
synced 2024-12-27 00:19:43 -05:00
200 lines
5.7 KiB
C
200 lines
5.7 KiB
C
// Copyright (C) 2023, Mark Qvist
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
|
|
// You should have received a copy of the GNU General Public License
|
|
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
#include "ROM.h"
|
|
#include "Boards.h"
|
|
|
|
#ifndef CONFIG_H
|
|
#define CONFIG_H
|
|
|
|
#define MAJ_VERS 0x01
|
|
#define MIN_VERS 0x4d
|
|
|
|
#define MODE_HOST 0x11
|
|
#define MODE_TNC 0x12
|
|
|
|
#define CABLE_STATE_DISCONNECTED 0x00
|
|
#define CABLE_STATE_CONNECTED 0x01
|
|
uint8_t cable_state = CABLE_STATE_DISCONNECTED;
|
|
|
|
#define BT_STATE_NA 0xff
|
|
#define BT_STATE_OFF 0x00
|
|
#define BT_STATE_ON 0x01
|
|
#define BT_STATE_PAIRING 0x02
|
|
#define BT_STATE_CONNECTED 0x03
|
|
uint8_t bt_state = BT_STATE_NA;
|
|
uint32_t bt_ssp_pin = 0;
|
|
bool bt_ready = false;
|
|
bool bt_enabled = false;
|
|
bool bt_allow_pairing = false;
|
|
|
|
#define M_FRQ_S 27388122
|
|
#define M_FRQ_R 27388061
|
|
bool console_active = false;
|
|
bool modem_installed = false;
|
|
|
|
#define MTU 508
|
|
#define SINGLE_MTU 255
|
|
#define HEADER_L 1
|
|
#define MIN_L 1
|
|
#define CMD_L 64
|
|
|
|
bool mw_radio_online = false;
|
|
|
|
#define eeprom_addr(a) (a+EEPROM_OFFSET)
|
|
|
|
#if (MODEM == SX1262 || MODEM == SX1280) && defined(NRF52840_XXAA)
|
|
SPIClass spiModem(NRF_SPIM2, pin_miso, pin_sclk, pin_mosi);
|
|
#endif
|
|
|
|
// MCU independent configuration parameters
|
|
const long serial_baudrate = 115200;
|
|
|
|
// SX1276 RSSI offset to get dBm value from
|
|
// packet RSSI register
|
|
const int rssi_offset = 157;
|
|
|
|
// Default LoRa settings
|
|
const int lora_rx_turnaround_ms = 66;
|
|
const int lora_post_tx_yield_slots = 6;
|
|
uint32_t post_tx_yield_timeout = 0;
|
|
#define LORA_PREAMBLE_SYMBOLS_HW 4
|
|
#define LORA_PREAMBLE_SYMBOLS_MIN 18
|
|
#define LORA_PREAMBLE_TARGET_MS 15
|
|
#define LORA_CAD_SYMBOLS 3
|
|
int csma_slot_ms = 50;
|
|
float csma_p_min = 0.08;
|
|
float csma_p_max = 0.75;
|
|
float csma_b_speed = 0.15;
|
|
uint8_t csma_p = 85;
|
|
|
|
int lora_sf = 0;
|
|
int lora_cr = 5;
|
|
int lora_txp = 0xFF;
|
|
uint32_t lora_bw = 0;
|
|
uint32_t lora_freq = 0;
|
|
uint32_t lora_bitrate = 0;
|
|
long lora_preamble_symbols = 6;
|
|
float lora_symbol_time_ms = 0.0;
|
|
float lora_symbol_rate = 0.0;
|
|
float lora_us_per_byte = 0.0;
|
|
|
|
// Operational variables
|
|
bool radio_locked = true;
|
|
bool radio_online = false;
|
|
bool community_fw = true;
|
|
bool hw_ready = false;
|
|
bool radio_error = false;
|
|
bool disp_ready = false;
|
|
bool pmu_ready = false;
|
|
bool promisc = false;
|
|
bool implicit = false;
|
|
bool memory_low = false;
|
|
uint8_t implicit_l = 0;
|
|
|
|
uint8_t op_mode = MODE_HOST;
|
|
uint8_t model = 0x00;
|
|
uint8_t hwrev = 0x00;
|
|
|
|
int current_rssi = -292;
|
|
int last_rssi = -292;
|
|
uint8_t last_rssi_raw = 0x00;
|
|
uint8_t last_snr_raw = 0x80;
|
|
uint8_t seq = 0xFF;
|
|
uint16_t read_len = 0;
|
|
|
|
// Incoming packet buffer
|
|
uint8_t pbuf[MTU];
|
|
|
|
// KISS command buffer
|
|
uint8_t cmdbuf[CMD_L];
|
|
|
|
// LoRa transmit buffer
|
|
uint8_t tbuf[MTU];
|
|
|
|
uint32_t stat_rx = 0;
|
|
uint32_t stat_tx = 0;
|
|
|
|
#define STATUS_INTERVAL_MS 3
|
|
#if MCU_VARIANT == MCU_ESP32 || MCU_VARIANT == MCU_NRF52
|
|
#define DCD_SAMPLES 2500
|
|
#define UTIL_UPDATE_INTERVAL_MS 1000
|
|
#define UTIL_UPDATE_INTERVAL (UTIL_UPDATE_INTERVAL_MS/STATUS_INTERVAL_MS)
|
|
#define AIRTIME_LONGTERM 3600
|
|
#define AIRTIME_LONGTERM_MS (AIRTIME_LONGTERM*1000)
|
|
#define AIRTIME_BINLEN_MS (STATUS_INTERVAL_MS*DCD_SAMPLES)
|
|
#define AIRTIME_BINS ((AIRTIME_LONGTERM*1000)/AIRTIME_BINLEN_MS)
|
|
bool util_samples[DCD_SAMPLES];
|
|
uint16_t airtime_bins[AIRTIME_BINS];
|
|
float longterm_bins[AIRTIME_BINS];
|
|
int dcd_sample = 0;
|
|
float local_channel_util = 0.0;
|
|
float total_channel_util = 0.0;
|
|
float longterm_channel_util = 0.0;
|
|
float airtime = 0.0;
|
|
float longterm_airtime = 0.0;
|
|
#define current_airtime_bin(void) (millis()%AIRTIME_LONGTERM_MS)/AIRTIME_BINLEN_MS
|
|
#endif
|
|
float st_airtime_limit = 0.0;
|
|
float lt_airtime_limit = 0.0;
|
|
bool airtime_lock = false;
|
|
|
|
bool stat_signal_detected = false;
|
|
bool stat_signal_synced = false;
|
|
bool stat_rx_ongoing = false;
|
|
bool dcd = false;
|
|
bool dcd_led = false;
|
|
bool dcd_waiting = false;
|
|
long dcd_wait_until = 0;
|
|
uint16_t dcd_count = 0;
|
|
uint16_t dcd_threshold = 2;
|
|
|
|
uint32_t status_interval_ms = STATUS_INTERVAL_MS;
|
|
uint32_t last_status_update = 0;
|
|
uint32_t last_dcd = 0;
|
|
|
|
// Status flags
|
|
const uint8_t SIG_DETECT = 0x01;
|
|
const uint8_t SIG_SYNCED = 0x02;
|
|
const uint8_t RX_ONGOING = 0x04;
|
|
|
|
// Power management
|
|
#define BATTERY_STATE_UNKNOWN 0x00
|
|
#define BATTERY_STATE_DISCHARGING 0x01
|
|
#define BATTERY_STATE_CHARGING 0x02
|
|
#define BATTERY_STATE_CHARGED 0x03
|
|
bool battery_installed = false;
|
|
bool battery_indeterminate = false;
|
|
bool external_power = false;
|
|
bool battery_ready = false;
|
|
float battery_voltage = 0.0;
|
|
float battery_percent = 0.0;
|
|
uint8_t battery_state = 0x00;
|
|
uint8_t display_intensity = 0xFF;
|
|
uint8_t display_addr = 0xFF;
|
|
bool display_blanking_enabled = false;
|
|
bool display_diagnostics = true;
|
|
bool device_init_done = false;
|
|
bool eeprom_ok = false;
|
|
bool firmware_update_mode = false;
|
|
|
|
// Boot flags
|
|
#define START_FROM_BOOTLOADER 0x01
|
|
#define START_FROM_POWERON 0x02
|
|
#define START_FROM_BROWNOUT 0x03
|
|
#define START_FROM_JTAG 0x04
|
|
|
|
#endif
|