Git-Mirrors/RNode_Firmware
1
0
Fork 0
mirror of https://github.com/markqvist/RNode_Firmware.git synced 2024-12-23 14:39:46 -05:00
Code Issues Actions Packages Projects Releases Wiki Activity

Updated readme

Browse Source
This commit is contained in:
Mark Qvist 2018-06-20 22:01:24 +02:00
parent e4bdaa0180
commit cf7b9b3ae6
1 changed files with 1 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
README.md
View File

@ -1,6 +1,5 @@
# RNode Firmware
## Intro
This is the firmware for RNode, a very flexible LoRa-based communication device. RNode can functions as a:
- Network adapter for [RNS](https://github.com/markqvist/Reticulum)
@ -29,7 +28,7 @@ RNode can operate in two modes, host-controlled (default) and TNC mode:
## USB and Serial Protocol
You can communicate with RNode either via the on-board USB connector, or using the serial pins on the board (labeled RX0 and TX0). RNode uses a standard FTDI USB chip, so it works out of the box without additional drivers in most operating systems.
All communications to and from the board uses [KISS framing](https://en.wikipedia.org/wiki/KISS_(TNC)) with a custom command set. RNode also does not use HDLC ports in the command byte, and as such uses the full 8 bits of the command bytes for the actual command. Please see table below for supported commands.
All communications to and from the board uses [KISS framing](https://en.wikipedia.org/wiki/KISS_(TNC)) with a custom command set. RNode also does not use HDLC ports in the command byte, and as such uses the full 8 bits of the command byte is available for the actual command. Please see table below for supported commands.
| Command | Byte | Description
| -----------------|------| -----------------------------------------------