diff --git a/Makefile b/Makefile
index 3a18634..0d0fb51 100644
--- a/Makefile
+++ b/Makefile
@@ -181,8 +181,8 @@ upload-heltec32_v3:
 	arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
 	@sleep 1
 	rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
-	#@sleep 3
-	#python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+	@sleep 3
+	python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-tdeck:
 	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
diff --git a/RNode_Firmware.ino b/RNode_Firmware.ino
index f890cde..6bdf465 100644
--- a/RNode_Firmware.ino
+++ b/RNode_Firmware.ino
@@ -1124,7 +1124,6 @@ void serialCallback(uint8_t sbyte) {
                 ESCAPE = false;
             }
             if (sbyte > 0x00) recondition_display = true;
-            display_unblank();
         }
       #endif
     } else if (command == CMD_NP_INT) {
diff --git a/Utilities.h b/Utilities.h
index 4eb1f78..1893636 100644
--- a/Utilities.h
+++ b/Utilities.h
@@ -1510,7 +1510,6 @@ void db_conf_save(uint8_t val) {
 void drot_conf_save(uint8_t val) {
 	#if HAS_DISPLAY
 		if (val >= 0x00 and val <= 0x03) {
-			eeprom_update(eeprom_addr(ADDR_CONF_BSET), CONF_OK_BYTE);
 			eeprom_update(eeprom_addr(ADDR_CONF_DROT), val);
 			hard_reset();
 		}