diff --git a/Config.h b/Config.h
index 2869c61..80865d6 100644
--- a/Config.h
+++ b/Config.h
@@ -88,7 +88,7 @@
 	#define CSMA_CW_BANDS              4
 	#define CSMA_CW_MIN                0
 	#define CSMA_CW_PER_BAND_WINDOWS   15
-	#define CSMA_BAND_1_MAX_AIRTIME    6
+	#define CSMA_BAND_1_MAX_AIRTIME    7
 	#define CSMA_BAND_N_MIN_AIRTIME    85
 	int csma_slot_ms                =  CSMA_SLOT_MIN_MS;
 	long difs_ms                    =  CSMA_SIFS_MS + 2*csma_slot_ms;
diff --git a/Display.h b/Display.h
index 6f1f6d1..b77934b 100644
--- a/Display.h
+++ b/Display.h
@@ -558,7 +558,7 @@ void draw_signal_bars(int px, int py) {
 }
 
 #if MODEM == SX1280
-  #define WF_TX_SIZE 3
+  #define WF_TX_SIZE 5
 #else
   #define WF_TX_SIZE 5
 #endif
diff --git a/sx128x.cpp b/sx128x.cpp
index 89fb70a..cb4e7b9 100644
--- a/sx128x.cpp
+++ b/sx128x.cpp
@@ -107,34 +107,28 @@ bool ISR_VECT sx128x::getPacketValidity() {
 
 void ISR_VECT sx128x::onDio0Rise() {
     BaseType_t int_status = taskENTER_CRITICAL_FROM_ISR();
-    if (sx128x_modem.getPacketValidity()) { sx128x_modem.handleDio0Rise(); }
     // On the SX1280, there is a bug which can cause the busy line
     // to remain high if a high amount of packets are received when
     // in continuous RX mode. This is documented as Errata 16.1 in
     // the SX1280 datasheet v3.2 (page 149)
     // Therefore, the modem is set into receive mode each time a packet is received.
-    sx128x_modem.receive();
+    if (sx128x_modem.getPacketValidity()) { sx128x_modem.receive(); sx128x_modem.handleDio0Rise(); }
+    else                                  { sx128x_modem.receive(); }
+
     taskEXIT_CRITICAL_FROM_ISR(int_status);
 }
 
 void sx128x::handleDio0Rise() {
-    // received a packet
     _packetIndex = 0;
-
     uint8_t rxbuf[2] = {0};
     executeOpcodeRead(OP_RX_BUFFER_STATUS_8X, rxbuf, 2);
 
     // If implicit header mode is enabled, read packet length as payload length instead.
     // See SX1280 datasheet v3.2, page 92
-    if (_implicitHeaderMode == 0x80) {
-        _rxPacketLength = _payloadLength;
-    } else {
-        _rxPacketLength = rxbuf[0];
-    }
+    if (_implicitHeaderMode == 0x80) { _rxPacketLength = _payloadLength; }
+    else                             { _rxPacketLength = rxbuf[0]; }
 
-    if (_onReceive) {
-        _onReceive(_rxPacketLength);
-    }
+    if (_onReceive) { _onReceive(_rxPacketLength); }
 }
 
 bool sx128x::preInit() {