Git-Mirrors/RNode_Firmware
1
0
Fork 0
mirror of https://github.com/markqvist/RNode_Firmware.git synced 2025-11-23 16:33:28 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

Added Heltec v4 board defines and scaffold

Browse source
This commit is contained in:
Mark Qvist 2025-11-01 15:33:24 +01:00
parent 1817137767
commit 2947df3349
6 changed files with 102 additions and 8 deletions
Download patch file Download diff file Expand all files Collapse all files

42
Boards.h
View file

@ -95,6 +95,10 @@
#define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
#define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
#define PRODUCT_H32_V4 0xC3
#define BOARD_HELTEC32_V4 0x3B
#define MODEL_C8 0xC8 // Heltec Lora32 v3, 850-950 MHz, 28dBm
#define PRODUCT_HELTEC_T114 0xC2 // Heltec Mesh Node T114
#define BOARD_HELTEC_T114 0x3C
#define MODEL_C6 0xC6 // Heltec Mesh Node T114, 470-510 MHz
@ -375,6 +379,44 @@
const int pin_miso = 11;
const int pin_sclk = 9;
#elif BOARD_MODEL == BOARD_HELTEC32_V4
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#define OCP_TUNED 0x18
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13;
const int pin_led_tx = 14;
#else
const int pin_led_rx = 35;
const int pin_led_tx = 35;
#endif
#define MODEM SX1262
#define HAS_TCXO true
const int pin_tcxo_enable = -1;
#define HAS_BUSY true
#define DIO2_AS_RF_SWITCH true
const int pin_cs = 8;
const int pin_busy = 13;
const int pin_dio = 14;
const int pin_reset = 12;
const int pin_mosi = 10;
const int pin_miso = 11;
const int pin_sclk = 9;
#elif BOARD_MODEL == BOARD_RNODE_NG_20
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true

20
Display.h
View file

@ -60,6 +60,11 @@
#define DISP_ADDR 0x3C
#define SCL_OLED 18
#define SDA_OLED 17
#elif BOARD_MODEL == BOARD_HELTEC32_V4
#define DISP_RST 21
#define DISP_ADDR 0x3C
#define SCL_OLED 18
#define SDA_OLED 17
#elif BOARD_MODEL == BOARD_RAK4631
// RAK1921/SSD1306
#define DISP_RST -1
@ -265,6 +270,18 @@ bool display_init() {
digitalWrite(pin_display_en, HIGH);
delay(50);
Wire.begin(SDA_OLED, SCL_OLED);
#elif BOARD_MODEL == BOARD_HELTEC32_V4
// enable vext / pin 36
pinMode(Vext, OUTPUT);
digitalWrite(Vext, LOW);
delay(50);
int pin_display_en = 21;
pinMode(pin_display_en, OUTPUT);
digitalWrite(pin_display_en, LOW);
delay(50);
digitalWrite(pin_display_en, HIGH);
delay(50);
Wire.begin(SDA_OLED, SCL_OLED);
#elif BOARD_MODEL == BOARD_LORA32_V1_0
int pin_display_en = 16;
digitalWrite(pin_display_en, LOW);
@ -382,6 +399,9 @@ bool display_init() {
#elif BOARD_MODEL == BOARD_HELTEC32_V3
disp_mode = DISP_MODE_PORTRAIT;
display.setRotation(1);
#elif BOARD_MODEL == BOARD_HELTEC32_V4
disp_mode = DISP_MODE_PORTRAIT;
display.setRotation(1);
#elif BOARD_MODEL == BOARD_HELTEC_T114
disp_mode = DISP_MODE_PORTRAIT;
display.setRotation(1);

25
Power.h
View file

@ -111,6 +111,23 @@
bool bat_voltage_dropping = false;
float bat_delay_v = 0;
float bat_state_change_v = 0;
#elif BOARD_MODEL == BOARD_HELTEC32_V4
#define BAT_V_MIN 3.15
#define BAT_V_MAX 4.3
#define BAT_V_CHG 4.48
#define BAT_V_FLOAT 4.33
#define BAT_SAMPLES 7
const uint8_t pin_vbat = 1;
const uint8_t pin_ctrl = 37;
float bat_p_samples[BAT_SAMPLES];
float bat_v_samples[BAT_SAMPLES];
uint8_t bat_samples_count = 0;
int bat_discharging_samples = 0;
int bat_charging_samples = 0;
int bat_charged_samples = 0;
bool bat_voltage_dropping = false;
float bat_delay_v = 0;
float bat_state_change_v = 0;
#elif BOARD_MODEL == BOARD_HELTEC_T114
#define BAT_V_MIN 3.15
#define BAT_V_MAX 4.165
@ -154,12 +171,14 @@ uint8_t pmu_rc = 0;
void kiss_indicate_battery();
void measure_battery() {
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC_T114 || BOARD_MODEL == BOARD_TECHO
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC_T114 || BOARD_MODEL == BOARD_TECHO
battery_installed = true;
battery_indeterminate = true;
#if BOARD_MODEL == BOARD_HELTEC32_V3
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.0041;
#elif BOARD_MODEL == BOARD_HELTEC32_V4
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.0041;
#elif BOARD_MODEL == BOARD_T3S3
float battery_measurement = (float)(analogRead(pin_vbat)) / 4095.0*6.7828;
#elif BOARD_MODEL == BOARD_HELTEC_T114
@ -351,6 +370,10 @@ bool init_pmu() {
pinMode(pin_ctrl,OUTPUT);
digitalWrite(pin_ctrl, LOW);
return true;
#elif BOARD_MODEL == BOARD_HELTEC32_V4
pinMode(pin_ctrl,OUTPUT);
digitalWrite(pin_ctrl, LOW);
return true;
#elif BOARD_MODEL == BOARD_HELTEC_T114
pinMode(pin_ctrl,OUTPUT);
digitalWrite(pin_ctrl, HIGH);

19
Utilities.h
View file

@ -72,8 +72,8 @@ uint8_t eeprom_read(uint32_t mapped_addr);
#include "Device.h"
#endif
#if MCU_VARIANT == MCU_ESP32
//https://github.com/espressif/esp-idf/issues/8855
#if BOARD_MODEL == BOARD_HELTEC32_V3
//https://github.com/espressif/esp-idf/issues/8855
#include "hal/wdt_hal.h"
#elif BOARD_MODEL == BOARD_T3S3
#include "hal/wdt_hal.h"
@ -301,6 +301,13 @@ uint8_t boot_vector = 0x00;
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
void led_id_on() { }
void led_id_off() { }
#elif BOARD_MODEL == BOARD_HELTEC32_V4
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
void led_id_on() { }
void led_id_off() { }
#elif BOARD_MODEL == BOARD_LORA32_V2_1
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
@ -1548,10 +1555,12 @@ bool eeprom_model_valid() {
if (model == MODEL_C4 || model == MODEL_C9) {
#elif BOARD_MODEL == BOARD_HELTEC32_V3
if (model == MODEL_C5 || model == MODEL_CA) {
#elif BOARD_MODEL == BOARD_HELTEC_T114
if (model == MODEL_C6 || model == MODEL_C7) {
#elif BOARD_MODEL == BOARD_RAK4631
if (model == MODEL_11 || model == MODEL_12) {
#elif BOARD_MODEL == BOARD_HELTEC32_V4
if (model == MODEL_C8) {
#elif BOARD_MODEL == BOARD_HELTEC_T114
if (model == MODEL_C6 || model == MODEL_C7) {
#elif BOARD_MODEL == BOARD_RAK4631
if (model == MODEL_11 || model == MODEL_12) {
#elif BOARD_MODEL == BOARD_HUZZAH32
if (model == MODEL_FF) {
#elif BOARD_MODEL == BOARD_GENERIC_ESP32

2
sx126x.cpp
View file

@ -125,7 +125,7 @@ bool sx126x::preInit() {
pinMode(_ss, OUTPUT);
digitalWrite(_ss, HIGH);
#if BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_XIAO_S3
#if BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_XIAO_S3
SPI.begin(pin_sclk, pin_miso, pin_mosi, pin_cs);
#elif BOARD_MODEL == BOARD_TECHO
SPI.setPins(pin_miso, pin_sclk, pin_mosi);

2
sx128x.cpp
View file

@ -134,7 +134,7 @@ bool sx128x::preInit() {
// TODO: Check if this change causes issues on any platforms
#if MCU_VARIANT == MCU_ESP32
#if BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_TDECK
#if BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK
SPI.begin(pin_sclk, pin_miso, pin_mosi, pin_cs);
#else
SPI.begin();