Git-Mirrors/RNode_Firmware
1
0
Fork 0
mirror of https://github.com/markqvist/RNode_Firmware.git synced 2025-11-29 11:06:33 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

Added support for connecting ESP32S3 RNodes over WiFi

Browse source
This commit is contained in:
Mark Qvist 2025-11-17 16:41:25 +01:00
parent 5b7b0d3afe
commit 2319813a65
10 changed files with 388 additions and 34 deletions
Download patch file Download diff file Expand all files Collapse all files

36
Utilities.h
View file

@ -60,6 +60,10 @@ uint8_t eeprom_read(uint32_t mapped_addr);
#include "Bluetooth.h"
#endif
#if HAS_WIFI == true
#include "Remote.h"
#endif
#if HAS_PMU == true
#include "Power.h"
#endif
@ -797,7 +801,12 @@ int8_t led_standby_direction = 0;
void serial_write(uint8_t byte) {
#if HAS_BLUETOOTH || HAS_BLE == true
if (bt_state != BT_STATE_CONNECTED) {
Serial.write(byte);
#if HAS_WIFI
if (wifi_host_is_connected()) { wifi_remote_write(byte); }
else { Serial.write(byte); }
#else
Serial.write(byte);
#endif
} else {
SerialBT.write(byte);
#if MCU_VARIANT == MCU_NRF52 && HAS_BLE
@ -1286,7 +1295,6 @@ int map_target_power_to_modem_output(int target_tx_power) {
for (int i = 0; i < PA_GAIN_POINTS; i++) {
int gain = tx_gain[i];
int effective_output_dbm = i + gain;
printf("At %d dBm modem output, gain is %d dBm, effective output is %d\n", i, gain, effective_output_dbm);
if (effective_output_dbm > target_tx_power) {
int diff = effective_output_dbm - target_tx_power;
modem_output_dbm = -1*diff;
@ -1490,6 +1498,15 @@ void eeprom_dump_all() {
}
}
void eeprom_config_dump_all() {
#if MCU_VARIANT == MCU_ESP32
for (int addr = 0; addr < CONFIG_SIZE; addr++) {
uint8_t byte = EEPROM.read(config_addr(addr));
escaped_serial_write(byte);
}
#endif
}
void kiss_dump_eeprom() {
serial_write(FEND);
serial_write(CMD_ROM_READ);
@ -1497,6 +1514,13 @@ void kiss_dump_eeprom() {
serial_write(FEND);
}
void kiss_dump_config() {
serial_write(FEND);
serial_write(CMD_CFG_READ);
eeprom_config_dump_all();
serial_write(FEND);
}
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
void eeprom_flush() {
file.close();
@ -1680,6 +1704,14 @@ bool eeprom_checksum_valid() {
return checksum_valid;
}
void wr_conf_save(uint8_t mode) {
eeprom_update(eeprom_addr(ADDR_CONF_WIFI), mode);
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
// have to do a flush because we're only writing 1 byte and it syncs after 8
eeprom_flush();
#endif
}
void bt_conf_save(bool is_enabled) {
if (is_enabled) {
eeprom_update(eeprom_addr(ADDR_CONF_BT), BT_ENABLE_BYTE);