diff --git a/Makefile b/Makefile
index ceec2eb..444d3b2 100644
--- a/Makefile
+++ b/Makefile
@@ -14,10 +14,10 @@
 # along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 # Version 2.0.17 of the Arduino ESP core is based on ESP-IDF v4.4.7
-# ARDUINO_ESP_CORE_VER = 2.0.17
+ARDUINO_ESP_CORE_VER = 2.0.17
 
 # Version 3.2.0 of the Arduino ESP core is based on ESP-IDF v5.4.1
-ARDUINO_ESP_CORE_VER = 3.2.0
+# ARDUINO_ESP_CORE_VER = 3.2.0
 
 all: release
 
@@ -201,8 +201,8 @@ upload-heltec32_v3:
 	arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
 	@sleep 1
 	rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
-# 	@sleep 3
-# 	python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+	@sleep 3
+	python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-tdeck:
 	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@@ -236,8 +236,8 @@ upload-t3s3:
 	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
 	@sleep 1
 	rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
-# 	@sleep 3
-# 	python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+	@sleep 3
+	python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-featheresp32:
 	arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32
@@ -265,8 +265,8 @@ upload-xiao_s3:
 	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:XIAO_ESP32S3
 	@sleep 1
 	rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.bin)
-# 	@sleep 3
-# 	python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+	@sleep 3
+	python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 release: release-all