mirror of
https://github.com/markqvist/OpenModem.git
synced 2024-09-20 01:45:45 +00:00
239 lines
7.5 KiB
C
239 lines
7.5 KiB
C
/**
|
|
* \file
|
|
* <!--
|
|
* This file is part of BeRTOS.
|
|
*
|
|
* Bertos is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
* As a special exception, you may use this file as part of a free software
|
|
* library without restriction. Specifically, if other files instantiate
|
|
* templates or use macros or inline functions from this file, or you compile
|
|
* this file and link it with other files to produce an executable, this
|
|
* file does not by itself cause the resulting executable to be covered by
|
|
* the GNU General Public License. This exception does not however
|
|
* invalidate any other reasons why the executable file might be covered by
|
|
* the GNU General Public License.
|
|
*
|
|
* Copyright 2005 Develer S.r.l. (http://www.develer.com/)
|
|
* -->
|
|
*
|
|
*
|
|
* \brief Test for PWM driver (implementation)
|
|
*
|
|
* This is a simple test for PWM driver. This module
|
|
* is target independent, so you can test all target that
|
|
* BeRTOS support.
|
|
* To use this test you should include a pwm_map.h header where
|
|
* are defined the PWM channels for your target. Then you should add
|
|
* or remove a test setting in pwm_test_cfg array, and edit a value for
|
|
* your specific test.
|
|
* Afther this, all is ready and you can test PWM driver.
|
|
*
|
|
* The test check first if all PWM channel starts, and then try
|
|
* to change a PWM duty cicle for all channel.
|
|
* The change of duty cycle is operate when a PWM channel is enable,
|
|
* in this way you can see if a pwm signal is clean and work properly.
|
|
* The duty value is change incrementaly, and when it arrive to 100% or 0%,
|
|
* we reset the duty value and restart the test.
|
|
* Further the duty test, we check also a PWM polarity, infact when we
|
|
* reach a reset duty value, we invert a polary of PWM wavform.
|
|
* So you can see if the hardware manage correctly this situation.
|
|
*
|
|
* Note: To be simple and target independently we not use a timer module,
|
|
* and so the delay is do with a for cycle.
|
|
*
|
|
* \author Daniele Basile <asterix@develer.com>
|
|
*/
|
|
|
|
#include "hw/pwm_map.h" // For PwmDev and channel avaible on thi target
|
|
#include "cfg/cfg_pwm.h"
|
|
#include <cfg/macros.h>
|
|
#include <cfg/debug.h>
|
|
|
|
// Define logging setting (for cfg/log.h module).
|
|
#define LOG_LEVEL PWM_LOG_LEVEL
|
|
#define LOG_FORMAT PWM_LOG_FORMAT
|
|
#include <cfg/log.h> // for logging system
|
|
|
|
#include <cpu/types.h>
|
|
#include <cpu/irq.h>
|
|
|
|
#include <drv/pwm.h>
|
|
#include CPU_HEADER(pwm)
|
|
|
|
#define DELAY_TIME 10000 // This is a number of for cycle before to set a new value of duty
|
|
#define PWM_DUTY_INC 200 // Incremental value for duty
|
|
|
|
|
|
/*
|
|
* Simple struct to store
|
|
* the testing value.
|
|
*/
|
|
typedef struct PwmTest
|
|
{
|
|
int ch;
|
|
bool pol;
|
|
pwm_freq_t freq;
|
|
pwm_duty_t duty;
|
|
} PwmTest;
|
|
|
|
/*
|
|
* Test settings for each channel.
|
|
*
|
|
* Frequency value is in Hz.
|
|
*
|
|
* Esample of value for duty cycle"
|
|
*
|
|
* - 100% => 0xFFFFFFFF
|
|
* - 80% => 0xCCCCCCCC
|
|
* - 75% => 0xBFFFFFFF
|
|
* - 50% => 0x7FFFFFFF
|
|
* - 25% => 0x3FFFFFFF
|
|
* - 33% => 0x55555555
|
|
* - 16% => 0x2AAAAAAA
|
|
*/
|
|
static PwmTest pwm_test_cfg[PWM_CNT] =
|
|
{
|
|
/* Channel, polarity, frequecy, duty */
|
|
{ 0, false, 100UL, 0 }, /* 100Hz, 0% duty */
|
|
{ 1, false, 1000UL, 0x7FFF }, /* 1KHz, 50% duty */
|
|
{ 2, false, 12356UL, 0x5555 }, /* 12,356KHz, 33% duty */
|
|
{ 3, false, 100000UL, 0xCCCC } /* 100KHz, 80% duty */
|
|
};
|
|
|
|
/*
|
|
* Setup all needed to test PWM on AT91
|
|
*
|
|
*/
|
|
int pwm_testSetup(void)
|
|
{
|
|
LOG_INFO("Init pwm..");
|
|
pwm_init();
|
|
LOG_INFO("done.\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Test suit for genation of pwm waveform.
|
|
*
|
|
*/
|
|
void NORETURN pwm_testRun(void)
|
|
{
|
|
pwm_duty_t duty = 0;
|
|
int delay = 0;
|
|
|
|
pwm_testSetup();
|
|
|
|
LOG_INFO("\n\n===== BeRTOS PWM test =====\n\n");
|
|
|
|
for (int i = 0; i < PWM_CNT; i++)
|
|
{
|
|
LOG_INFO("PWM test ch[%d]\n", pwm_test_cfg[i].ch);
|
|
LOG_INFO("--> set pol[%d]", pwm_test_cfg[i].pol);
|
|
LOG_INFO("\n(Note: if polarity is false the output waveform start at high level,\n see low level implentation for detail)i\n");
|
|
pwm_setPolarity(pwm_test_cfg[i].ch, pwm_test_cfg[i].pol);
|
|
LOG_INFO("..ok\n");
|
|
|
|
LOG_INFO("--> set freq[%ld]", pwm_test_cfg[i].freq);
|
|
pwm_setFrequency(pwm_test_cfg[i].ch, pwm_test_cfg[i].freq);
|
|
LOG_INFO("..ok\n");
|
|
|
|
LOG_INFO("--> set duty[%d]", pwm_test_cfg[i].duty);
|
|
pwm_setDuty(pwm_test_cfg[i].ch, pwm_test_cfg[i].duty);
|
|
LOG_INFO("..ok\n");
|
|
|
|
LOG_INFO("--> Enable pwm");
|
|
pwm_enable(pwm_test_cfg[i].ch, true);
|
|
LOG_INFO("..ok\n");
|
|
}
|
|
|
|
LOG_INFO("\n-------------------------- Dinamic PWM test --------------------------\n");
|
|
LOG_INFO("We test if driver change correctly the duty cycle durind it working.\n");
|
|
LOG_INFO("On your oscilloscope you should see the pwm singal that increase until\n");
|
|
LOG_INFO("the duty value is 100%%. After this value we invert a polarity of pwm,\n");
|
|
LOG_INFO("and repeat the test. But now you should see that pwm duty decreasing until\n");
|
|
LOG_INFO("0%% duty value.\nAfter that, we repeat the test from beginning.\n\n");
|
|
|
|
for (;;)
|
|
{
|
|
if (delay == DELAY_TIME)
|
|
{
|
|
for (int i = 0; i < PWM_CNT; i++)
|
|
{
|
|
LOG_INFO("PWM test ch[%d]\n", pwm_test_cfg[i].ch);
|
|
LOG_INFO("--> set duty[%d]", duty);
|
|
pwm_setDuty(pwm_test_cfg[i].ch, duty);
|
|
LOG_INFO("..ok\n");
|
|
}
|
|
LOG_INFO("\n++++++++++++++++++++\n");
|
|
duty += PWM_DUTY_INC;
|
|
delay = 0;
|
|
}
|
|
|
|
//Reset duty cycle overflow
|
|
if (duty >= (pwm_duty_t)0xFFFF)
|
|
{
|
|
duty = 0;
|
|
for (int i = 0; i < PWM_CNT; i++)
|
|
{
|
|
LOG_INFO("Duty reset, swap polarity:\n");
|
|
LOG_INFO("--> pol from [%d] to [%d]", pwm_test_cfg[i].pol, !pwm_test_cfg[i].pol);
|
|
|
|
pwm_test_cfg[i].pol = !pwm_test_cfg[i].pol;
|
|
pwm_setPolarity(pwm_test_cfg[i].ch, pwm_test_cfg[i].pol);
|
|
|
|
LOG_INFO("..ok\n");
|
|
}
|
|
LOG_INFO("\n++++++++++++++++++++\n");
|
|
}
|
|
delay++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* End a PWM Test.
|
|
* (Unused)
|
|
*/
|
|
int pwm_testTearDown(void)
|
|
{
|
|
/* */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Empty main.
|
|
*
|
|
* Look it as exmple or use it if
|
|
* you want test a PWM driver stand alone.
|
|
*/
|
|
#if 0
|
|
int main(void)
|
|
{
|
|
IRQ_ENABLE;
|
|
kdbg_init();
|
|
|
|
pwm_testRun();
|
|
|
|
for(;;)
|
|
{
|
|
}
|
|
|
|
}
|
|
#endif
|
|
|
|
|