Work on sample rate independency

device.h

@@ -14,6 +14,7 @@
 
 // Sampling & timer setup
 #define CONFIG_SAMPLERATE 19200UL
+//#define CONFIG_SAMPLERATE 19200UL
 //#define CONFIG_SAMPLERATE 9600
 
 // Serial settings
@@ -21,6 +22,9 @@
 #define SERIAL_DEBUG false
 #define TX_MAXWAIT 2UL
 
+// CSMA Settings
+#define CONFIG_CSMA_P 255
+
 // Port settings
 #if TARGET_CPU == m1284p
     #define ADC_PORT PORTA

hardware/AFSK.c

@@ -256,7 +256,7 @@ static bool hdlcParse(Hdlc *hdlc, bool bit, FIFOBuffer *fifo) {
     // In this comparison we also detect when no transmission
     // (or silence) is taking place, and the demodulator
     // returns an endless stream of zeroes. Due to the NRZ-S
-    // coding, the actual bits send to this function will
+    // coding, the actual bits sent to this function will
     // be an endless stream of ones, which this AND operation
     // will also detect.
     if ((hdlc->demodulatedBits & HDLC_RESET) == HDLC_RESET) {
@@ -549,13 +549,18 @@ void AFSK_adc_isr(Afsk *afsk, int8_t currentSample) {
 
 ISR(ADC_vect) {
     TIFR1 = _BV(ICF1);
+
+    //DAC_PORT ^= 0xFF;
+    //DAC_PORT = ADCH;
+
     AFSK_adc_isr(AFSK_modem, (ADCH - 128));
-    
+
     if (hw_afsk_dac_isr) {
         DAC_PORT = AFSK_dac_isr(AFSK_modem);
         LED_TX_ON();
     } else {
-        DAC_PORT = 128;
+        DAC_PORT = 127;
+        LED_TX_OFF();
     }
 
     ++_clock;

hardware/AFSK.h

@@ -39,8 +39,8 @@ inline static uint8_t sinSample(uint16_t i) {
 
 #define CPU_FREQ F_CPU
 
-#define CONFIG_AFSK_RX_BUFLEN 64
-#define CONFIG_AFSK_TX_BUFLEN 64   
+#define CONFIG_AFSK_RX_BUFLEN CONFIG_SAMPLERATE/150
+#define CONFIG_AFSK_TX_BUFLEN CONFIG_SAMPLERATE/150
 #define CONFIG_AFSK_RXTIMEOUT 0
 #define CONFIG_AFSK_TXWAIT    0UL
 #define CONFIG_AFSK_PREAMBLE_LEN 350UL
@@ -50,33 +50,25 @@ inline static uint8_t sinSample(uint16_t i) {
 #define BITRATE    1200
 #define SAMPLESPERBIT (CONFIG_SAMPLERATE / BITRATE)
 #define TICKS_BETWEEN_SAMPLES ((((CPU_FREQ+FREQUENCY_CORRECTION)) / CONFIG_SAMPLERATE) - 1)
-#define PHASE_INC    1                              // Nudge by an eigth of a sample each adjustment
 
-#define DCD_MIN_COUNT 6
-#define DCD_TIMEOUT_SAMPLES 96
-                       
-#if BITRATE == 960
-    #define FILTER_CUTOFF 600
-    #define MARK_FREQ  960
-    #define SPACE_FREQ 1600
-    #define PHASE_BITS   10                         // How much to increment phase counter each sample
-#elif BITRATE == 1200
-    #define FILTER_CUTOFF 600
-    #define MARK_FREQ  1200
-    #define SPACE_FREQ 2200
-    #define PHASE_BITS   8
-#elif BITRATE == 1600
-    #define FILTER_CUTOFF 800
-    #define MARK_FREQ  1600
-    #define SPACE_FREQ 2600
-    #define PHASE_BITS   8
-#else
-    #error Unsupported bitrate!
-#endif
+// TODO: Calculate based on sample rate
+#define PHASE_INC    SAMPLESPERBIT/8                   // Nudge by an eigth of a sample each adjustment
+#define PHASE_BITS   8 // How much to increment phase counter each sample
 
 #define PHASE_MAX    (SAMPLESPERBIT * PHASE_BITS)   // Resolution of our phase counter = 64
 #define PHASE_THRESHOLD  (PHASE_MAX / 2)            // Target transition point of our phase window
 
+#define DCD_TIMEOUT_SAMPLES CONFIG_SAMPLERATE/100
+#define DCD_MIN_COUNT CONFIG_SAMPLERATE/1600
+                       
+#if BITRATE == 1200
+    #define FILTER_CUTOFF 600
+    #define MARK_FREQ  1200
+    #define SPACE_FREQ 2200
+#else
+    #error Unsupported bitrate!
+#endif
+
 typedef struct Hdlc
 {
     uint8_t demodulatedBits;
@@ -146,7 +138,7 @@ typedef struct Afsk
 #define AFSK_DAC_INIT()        do { DAC_DDR |= 0xFF; } while (0)
 
 // Here's some macros for controlling the RX/TX LEDs
-// THE _INIT() functions writes to the DDRB register
+// THE _INIT() functions writes to the DDR registers
 // to configure the pins as output pins, and the _ON()
 // and _OFF() functions writes to the PORT registers
 // to turn the pins on or off.

protocol/KISS.c

@@ -18,7 +18,7 @@ unsigned long custom_preamble = CONFIG_AFSK_PREAMBLE_LEN;
 unsigned long custom_tail = CONFIG_AFSK_TRAILER_LEN;
 
 unsigned long slotTime = 200;
-uint8_t p = 63;
+uint8_t p = CONFIG_CSMA_P;
 
 void kiss_init(AX25Ctx *ax25, Afsk *afsk, Serial *ser) {
     ax25ctx = ax25;
@@ -55,7 +55,6 @@ void kiss_csma(AX25Ctx *ctx, uint8_t *buf, size_t len) {
         }
     }
     while (!sent) {
-        //puts("Waiting in CSMA");
         if(!channel->hdlc.dcd) {
             uint8_t tp = rand() & 0xFF;
             if (tp < p) {