LED driver implemented

device.h

@@ -16,7 +16,8 @@
 // TODO: Change this back to default
 #define CONFIG_LED_INTENSITY 35
 //#define CONFIG_LED_INTENSITY 192
-#define COM_LED_TIMEOUT_MS 40
+#define CONFIG_COM_LED_TIMEOUT_MS 40
+#define CONFIG_LED_UPDATE_INTERVAL_MS 40
 
 // Demodulator settings
 #define OPEN_SQUELCH true
@@ -29,6 +30,7 @@
 #define CONFIG_QUEUE_MAX_LENGTH 15
 #define CONFIG_SERIAL_BUFFER_SIZE 1532 // TODO: Tune this, what is actually required?
 #define CONFIG_SERIAL_TIMEOUT_MS 10
+#define CONFIG_BENCHMARK_MODE false
 
 // CSMA Settings
 #define CONFIG_FULL_DUPLEX false  // TODO: Actually implement fdx

hardware/AFSK.c

@@ -6,11 +6,11 @@
 
 // TODO: Remove testing vars ////
 #define SAMPLES_TO_CAPTURE 128
-uint32_t capturedsamples = 0;
+ticks_t capturedsamples = 0;
 uint8_t samplebuf[SAMPLES_TO_CAPTURE];
 /////////////////////////////////
 
-extern volatile uint32_t _clock;
+extern volatile ticks_t _clock;
 extern unsigned long custom_preamble;
 extern unsigned long custom_tail;
 
@@ -24,6 +24,8 @@ int afsk_putchar(char c, FILE *stream);
 
 // ADC and clock setup
 void AFSK_hw_init(void) {
+    _clock = 0;
+    
     // Run ADC initialisation
     AFSK_adc_init();
 
@@ -613,5 +615,7 @@ ISR(ADC_vect) {
         AFSK_adc_isr(AFSK_modem, (ADCH - 128));
     }
 
+    update_led_status();
+
     ++_clock;
 }

hardware/LED.c

@@ -2,9 +2,13 @@
 #include "util/time.h"
 
 uint8_t ledIntensity = CONFIG_LED_INTENSITY;
-uint32_t com_led_timeout = 0;
+ticks_t led_status_ticks_top = 0;
+ticks_t led_status_ticks = 0;
+ticks_t com_led_timeout = 0;
 
 void LED_init(void) {
+    led_status_ticks_top = ms_to_ticks(CONFIG_LED_UPDATE_INTERVAL_MS);
+
     // Enable output for LED pins and drain pin
     LED_DDR |= _BV(0) |	// RX
     		   _BV(1) | // TX
@@ -32,26 +36,20 @@ void LED_setIntensity(uint8_t value) {
 
 void LED_COM_ON(void) {
     LED_PORT |= _BV(4);
-    int32_t xa = timer_clock();
-    com_led_timeout = xa + ms_to_ticks(COM_LED_TIMEOUT_MS);
-    if (xa > com_led_timeout) {
-        while(true) {
-            LED_COM_ON();
-            LED_RX_ON();
-            LED_TX_ON();
-        }
-    }
+    com_led_timeout = timer_clock() + ms_to_ticks(CONFIG_COM_LED_TIMEOUT_MS);
 }
 
 void LED_COM_OFF(void) {
     LED_PORT &= ~_BV(4); 
 }
 
-void led_status(void) {
+void update_led_status(void) {
+    if (led_status_ticks >= led_status_ticks_top) {
         if (timer_clock() > com_led_timeout) {
-        if (LED_PORT & _BV(4)) {
-            printf("%d\r\n", timer_clock());
             LED_COM_OFF();
         }
+        led_status_ticks = 0;
+    } else {
+        led_status_ticks++;
     }
 }

hardware/LED.h

@@ -16,6 +16,6 @@ void LED_setIntensity(uint8_t value);
 
 void LED_COM_ON(void);
 void LED_COM_OFF(void);
-void led_status(void);
+void update_led_status(void);
 
 #endif

main.c

@@ -40,6 +40,7 @@ void init(void) {
     system_check();
 }
 
+
 int main (void) {
     init();
 
@@ -47,7 +48,6 @@ int main (void) {
         ax25_poll(&AX25);
         kiss_poll();
         kiss_csma();
-        led_status();
     }
 
     return(0);

protocol/KISS.c

@@ -24,7 +24,7 @@ size_t packet_lengths_buf[CONFIG_QUEUE_MAX_LENGTH+1];
 AX25Ctx *ax25ctx;
 Afsk *channel;
 Serial *serial;
-volatile uint32_t last_serial_read = 0;
+volatile ticks_t last_serial_read = 0;
 size_t frame_len;
 bool IN_FRAME;
 bool ESCAPE;
@@ -57,12 +57,14 @@ void kiss_poll(void) {
     }
 }
 
-// TODO: Remove debug functions
-//size_t decodes = 0;
+#if CONFIG_BENCHMARK_MODE
+    size_t decodes = 0;
+#endif
 void kiss_messageCallback(AX25Ctx *ctx) {
-    //decodes++;
-    //printf("%d\r\n", decodes);
-    
+    #if CONFIG_BENCHMARK_MODE
+        decodes++;
+        printf("%d\r\n", decodes);
+    #else
         fputc(FEND, &serial->uart0);
         fputc(0x00, &serial->uart0);
         for (unsigned i = 0; i < ctx->frame_len-2; i++) {
@@ -78,7 +80,7 @@ void kiss_messageCallback(AX25Ctx *ctx) {
             }
         }
         fputc(FEND, &serial->uart0);
-    
+    #endif
 }
 
 void kiss_csma(void) {

util/time.h

@@ -6,13 +6,12 @@
 
 #define DIV_ROUND(dividend, divisor)  (((dividend) + (divisor) / 2) / (divisor))
 
-//typedef int32_t ticks_t;
-//typedef int32_t mtime_t;
+typedef int32_t ticks_t;
+typedef int32_t mtime_t;
+volatile ticks_t _clock;
 
-volatile uint32_t _clock;
-
-static inline uint32_t timer_clock(void) {
-    uint32_t result;
+static inline ticks_t timer_clock(void) {
+    ticks_t result;
 
     ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
         result = _clock;
@@ -22,7 +21,7 @@ static inline uint32_t timer_clock(void) {
 }
 
 
-inline uint32_t ms_to_ticks(mtime_t ms) {
+inline ticks_t ms_to_ticks(mtime_t ms) {
     return ms * DIV_ROUND(CLOCK_TICKS_PER_SEC, 1000);
 }
 
@@ -38,5 +37,4 @@ static inline void delay_ms(unsigned long ms) {
     }
 }
 
-
 #endif