mirror of
https://github.com/Divested-Mobile/DivestOS-Build.git
synced 2024-12-27 08:29:31 -05:00
168 lines
6.4 KiB
Diff
168 lines
6.4 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: ValdikSS <iam@valdikss.org.ru>
|
|
Date: Fri, 21 Sep 2018 21:43:14 +0300
|
|
Subject: [PATCH] Explicit SBC Dual Channel (SBC HD) support
|
|
|
|
Overwhelming majority of Bluetooth audio devices have SBC maximum bitpool value
|
|
limited to 53, which prevents bitrates higher than 328 kbit/s to be used with
|
|
the most common 44.1 kHz Joint Stereo, 8 subbands, 16 blocks profile. This
|
|
limitation could be circumvented on any existing device to achieve higher audio
|
|
quality, by using Dual Channel mode.
|
|
Dual Channel encodes channels separately, using the entire bitpool for each
|
|
channel. Forcing the device to use Dual Channel instead of Joint Stereo almost
|
|
doubles maximum possible bitrate for the same bitpool value.
|
|
|
|
A2DP specification v1.2, which was active from 2007 to 2015, requires all
|
|
decoders to work correctly with bitrates up to 512 kbps. Newer specification
|
|
does not have the limit at all. It is assumed that most modern headphones with
|
|
EDR support can handle any SBC profile with maximum bitpool value, regardless
|
|
of resulting bitrate.
|
|
|
|
This commit defines optimal Dual Channel bitrate profiles:
|
|
EDR 2mbit/s - 452 kbit/s for 44.1 kHz, 492 kbit/s for 48 kHz (bitpool 38,
|
|
4 audio frames, 10.7 ms, 6 wasted bytes per packet)
|
|
EDR 3mbit/s - 551.3 kbit/s for 44.1 kHz, 600 kbit/s for 48 kHz (bitpool 47,
|
|
5 audio frames, 13.4 ms, 4 wasted bytes per packet)
|
|
|
|
With 452 kbit/s, SBC outperforms aptX, with 551.3 kbit/s, on par or close to
|
|
aptX HD.
|
|
|
|
SBC HD is disabled by default and should be activated by setting
|
|
"persist.bt.sbc_hd_enabled" property:
|
|
$ setprop persist.bt.sbc_hd_enabled 1
|
|
|
|
Bitrate could be increased further with "persist.bt.sbc_hd_higher_kbps"
|
|
property. If the property is set, the following EDR 2mbit/s profile is used:
|
|
595.4 kbit/s for 44.1 kHz, 648 kbit/s for 48 kHz (bitpool 51, 3 audio frames,
|
|
8.8 ms, 14 wasted bytes per packet)
|
|
|
|
53 out of 57 tested headphones, receivers and automotive head units were able
|
|
to correctly receive and decode high bitrate Dual Channel audio.
|
|
|
|
Test: manual, with various headphones, receivers, and speakers
|
|
Change-Id: If74d9d46461c67b8aef39d63430b2f0187c9e714
|
|
---
|
|
btif/co/bta_av_co.c | 21 ++++++++++++++++++++-
|
|
btif/src/btif_media_task.c | 14 ++++++++++++++
|
|
2 files changed, 34 insertions(+), 1 deletion(-)
|
|
|
|
diff --git a/btif/co/bta_av_co.c b/btif/co/bta_av_co.c
|
|
index 39a8ebfa7..f205ddacc 100644
|
|
--- a/btif/co/bta_av_co.c
|
|
+++ b/btif/co/bta_av_co.c
|
|
@@ -43,6 +43,7 @@
|
|
#include "btif_av_co.h"
|
|
#include "btif_util.h"
|
|
#include "osi/include/mutex.h"
|
|
+#include "osi/include/properties.h"
|
|
|
|
#include "bt_utils.h"
|
|
#include "a2d_aptx.h"
|
|
@@ -81,6 +82,7 @@
|
|
#else
|
|
#define BTA_AV_CO_SBC_MAX_BITPOOL 53
|
|
#endif
|
|
+#define A2DP_SBC_HD_ENABLE_PROP "persist.bt.sbc_hd_enabled"
|
|
|
|
/* SCMS-T protect info */
|
|
const UINT8 bta_av_co_cp_scmst[BTA_AV_CP_INFO_LEN] = "\x02\x02\x00";
|
|
@@ -138,6 +140,18 @@ const tA2D_SBC_CIE btif_av_sbc_default_config =
|
|
A2D_SBC_IE_MIN_BITPOOL /* min_bitpool */
|
|
};
|
|
|
|
+/* Alternative SBC codec configuration */
|
|
+const tA2D_SBC_CIE btif_av_sbc_alt_config =
|
|
+{
|
|
+ BTIF_AV_SBC_DEFAULT_SAMP_FREQ, /* samp_freq */
|
|
+ A2D_SBC_IE_CH_MD_DUAL, /* ch_mode */
|
|
+ A2D_SBC_IE_BLOCKS_16, /* block_len */
|
|
+ A2D_SBC_IE_SUBBAND_8, /* num_subbands */
|
|
+ A2D_SBC_IE_ALLOC_MD_L, /* alloc_mthd */
|
|
+ BTA_AV_CO_SBC_MAX_BITPOOL, /* max_bitpool */
|
|
+ A2D_SBC_IE_MIN_BITPOOL /* min_bitpool */
|
|
+};
|
|
+
|
|
const tA2D_APTX_CIE bta_av_co_aptx_caps =
|
|
{
|
|
A2D_APTX_VENDOR_ID,
|
|
@@ -566,7 +580,10 @@ void bta_av_build_src_cfg (UINT8 *p_pref_cfg, UINT8 *p_src_cap)
|
|
else if (src_cap.samp_freq & A2D_SBC_IE_SAMP_FREQ_44)
|
|
pref_cap.samp_freq = A2D_SBC_IE_SAMP_FREQ_44;
|
|
|
|
- if (src_cap.ch_mode & A2D_SBC_IE_CH_MD_JOINT)
|
|
+ if (property_get_int32(A2DP_SBC_HD_ENABLE_PROP, 0)
|
|
+ && (src_cap.ch_mode & A2D_SBC_IE_CH_MD_DUAL))
|
|
+ pref_cap.ch_mode = A2D_SBC_IE_CH_MD_DUAL;
|
|
+ else if (src_cap.ch_mode & A2D_SBC_IE_CH_MD_JOINT)
|
|
pref_cap.ch_mode = A2D_SBC_IE_CH_MD_JOINT;
|
|
else if (src_cap.ch_mode & A2D_SBC_IE_CH_MD_STEREO)
|
|
pref_cap.ch_mode = A2D_SBC_IE_CH_MD_STEREO;
|
|
@@ -2209,6 +2226,8 @@ BOOLEAN bta_av_co_audio_set_codec(const tBTIF_AV_MEDIA_FEEDINGS *p_feeding, tBTI
|
|
new_cfg_sbc.id = BTIF_AV_CODEC_SBC;
|
|
|
|
sbc_config = btif_av_sbc_default_config;
|
|
+ if (property_get_int32(A2DP_SBC_HD_ENABLE_PROP, 0))
|
|
+ sbc_config = btif_av_sbc_alt_config;
|
|
if ((p_feeding->cfg.pcm.num_channel != 1) &&
|
|
(p_feeding->cfg.pcm.num_channel != 2))
|
|
{
|
|
diff --git a/btif/src/btif_media_task.c b/btif/src/btif_media_task.c
|
|
index cac0c2211..4c956bd3c 100644
|
|
--- a/btif/src/btif_media_task.c
|
|
+++ b/btif/src/btif_media_task.c
|
|
@@ -59,6 +59,7 @@
|
|
#include "osi/include/metrics.h"
|
|
#include "osi/include/mutex.h"
|
|
#include "osi/include/thread.h"
|
|
+#include "osi/include/properties.h"
|
|
#include "bt_utils.h"
|
|
#include "a2d_api.h"
|
|
#include "a2d_int.h"
|
|
@@ -114,6 +115,8 @@ OI_INT16 pcmData[15*SBC_MAX_SAMPLES_PER_FRAME*SBC_MAX_CHANNELS];
|
|
#include "bta_api.h"
|
|
#endif
|
|
|
|
+#define A2DP_SBC_HD_PROP "persist.bt.sbc_hd_higher_kbps"
|
|
+
|
|
|
|
/*****************************************************************************
|
|
** Constants
|
|
@@ -209,12 +212,16 @@ enum {
|
|
|
|
#ifdef BTA_AV_SPLIT_A2DP_DEF_FREQ_48KHZ
|
|
#define BTIF_A2DP_DEFAULT_BITRATE 496
|
|
+#define BTIF_A2DP_3DH5_BITRATE 601
|
|
+#define BTIF_A2DP_2DH5_ALT_BITRATE 649
|
|
|
|
#ifndef BTIF_A2DP_NON_EDR_MAX_RATE
|
|
#define BTIF_A2DP_NON_EDR_MAX_RATE 237
|
|
#endif
|
|
#else
|
|
#define BTIF_A2DP_DEFAULT_BITRATE 455
|
|
+#define BTIF_A2DP_3DH5_BITRATE 552
|
|
+#define BTIF_A2DP_2DH5_ALT_BITRATE 596
|
|
|
|
#ifndef BTIF_A2DP_NON_EDR_MAX_RATE
|
|
#define BTIF_A2DP_NON_EDR_MAX_RATE 229
|
|
@@ -232,6 +239,7 @@ enum {
|
|
|
|
/* 2DH5 payload size of 679 bytes - (4 bytes L2CAP Header + 12 bytes AVDTP Header) */
|
|
#define MAX_2MBPS_AVDTP_MTU 663
|
|
+#define MIN_3MBPS_AVDTP_SAFE_MTU 800
|
|
#define USEC_PER_SEC 1000000L
|
|
#define TPUT_STATS_INTERVAL_US (3000*1000)
|
|
|
|
@@ -1252,6 +1260,12 @@ static UINT16 btif_media_task_get_sbc_rate(void)
|
|
{
|
|
rate = BTIF_A2DP_NON_EDR_MAX_RATE;
|
|
APPL_TRACE_DEBUG("non-edr a2dp sink detected, restrict rate to %d", rate);
|
|
+ } else if (btif_av_peer_supports_3mbps()
|
|
+ && btif_media_cb.TxAaMtuSize >= MIN_3MBPS_AVDTP_SAFE_MTU) {
|
|
+ rate = BTIF_A2DP_3DH5_BITRATE;
|
|
+ } else if (!btif_av_peer_supports_3mbps()
|
|
+ && property_get_int32(A2DP_SBC_HD_PROP, 0)) {
|
|
+ rate = BTIF_A2DP_2DH5_ALT_BITRATE;
|
|
}
|
|
|
|
return rate;
|