Git-Mirrors/DivestOS
1
0
Fork 0
mirror of https://github.com/Divested-Mobile/DivestOS-Build.git synced 2024-06-26 14:42:13 +00:00
Code Issues Packages Projects Releases Wiki Activity
master
DivestOS/Patches/LineageOS-14.1/android_system_bt/229575.patch
Tad b6575a362e Small tweaks 
Signed-off-by: Tad <tad@spotco.us>
2021-11-02 22:47:34 -04:00

168 lines
6.4 KiB
Diff
Raw Permalink Blame History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: ValdikSS <iam@valdikss.org.ru>
Date: Fri, 21 Sep 2018 21:43:14 +0300
Subject: [PATCH] Explicit SBC Dual Channel (SBC HD) support
Overwhelming majority of Bluetooth audio devices have SBC maximum bitpool value
limited to 53, which prevents bitrates higher than 328 kbit/s to be used with
the most common 44.1 kHz Joint Stereo, 8 subbands, 16 blocks profile. This
limitation could be circumvented on any existing device to achieve higher audio
quality, by using Dual Channel mode.
Dual Channel encodes channels separately, using the entire bitpool for each
channel. Forcing the device to use Dual Channel instead of Joint Stereo almost
doubles maximum possible bitrate for the same bitpool value.
A2DP specification v1.2, which was active from 2007 to 2015, requires all
decoders to work correctly with bitrates up to 512 kbps. Newer specification
does not have the limit at all. It is assumed that most modern headphones with
EDR support can handle any SBC profile with maximum bitpool value, regardless
of resulting bitrate.
This commit defines optimal Dual Channel bitrate profiles:
EDR 2mbit/s - 452 kbit/s for 44.1 kHz, 492 kbit/s for 48 kHz (bitpool 38,
4 audio frames, 10.7 ms, 6 wasted bytes per packet)
EDR 3mbit/s - 551.3 kbit/s for 44.1 kHz, 600 kbit/s for 48 kHz (bitpool 47,
5 audio frames, 13.4 ms, 4 wasted bytes per packet)
With 452 kbit/s, SBC outperforms aptX, with 551.3 kbit/s, on par or close to
aptX HD.
SBC HD is disabled by default and should be activated by setting
"persist.bt.sbc_hd_enabled" property:
$ setprop persist.bt.sbc_hd_enabled 1
Bitrate could be increased further with "persist.bt.sbc_hd_higher_kbps"
property. If the property is set, the following EDR 2mbit/s profile is used:
595.4 kbit/s for 44.1 kHz, 648 kbit/s for 48 kHz (bitpool 51, 3 audio frames,
8.8 ms, 14 wasted bytes per packet)
53 out of 57 tested headphones, receivers and automotive head units were able
to correctly receive and decode high bitrate Dual Channel audio.
Test: manual, with various headphones, receivers, and speakers
Change-Id: If74d9d46461c67b8aef39d63430b2f0187c9e714
---
btif/co/bta_av_co.c | 21 ++++++++++++++++++++-
btif/src/btif_media_task.c | 14 ++++++++++++++
2 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/btif/co/bta_av_co.c b/btif/co/bta_av_co.c
index 39a8ebfa7..f205ddacc 100644
--- a/btif/co/bta_av_co.c
+++ b/btif/co/bta_av_co.c
@@ -43,6 +43,7 @@
#include "btif_av_co.h"
#include "btif_util.h"
#include "osi/include/mutex.h"
+#include "osi/include/properties.h"
#include "bt_utils.h"
#include "a2d_aptx.h"
@@ -81,6 +82,7 @@
#else
#define BTA_AV_CO_SBC_MAX_BITPOOL 53
#endif
+#define A2DP_SBC_HD_ENABLE_PROP "persist.bt.sbc_hd_enabled"
/* SCMS-T protect info */
const UINT8 bta_av_co_cp_scmst[BTA_AV_CP_INFO_LEN] = "\x02\x02\x00";
@@ -138,6 +140,18 @@ const tA2D_SBC_CIE btif_av_sbc_default_config =
A2D_SBC_IE_MIN_BITPOOL /* min_bitpool */
};
+/* Alternative SBC codec configuration */
+const tA2D_SBC_CIE btif_av_sbc_alt_config =
+{
+ BTIF_AV_SBC_DEFAULT_SAMP_FREQ, /* samp_freq */
+ A2D_SBC_IE_CH_MD_DUAL, /* ch_mode */
+ A2D_SBC_IE_BLOCKS_16, /* block_len */
+ A2D_SBC_IE_SUBBAND_8, /* num_subbands */
+ A2D_SBC_IE_ALLOC_MD_L, /* alloc_mthd */
+ BTA_AV_CO_SBC_MAX_BITPOOL, /* max_bitpool */
+ A2D_SBC_IE_MIN_BITPOOL /* min_bitpool */
+};
+
const tA2D_APTX_CIE bta_av_co_aptx_caps =
{
A2D_APTX_VENDOR_ID,
@@ -566,7 +580,10 @@ void bta_av_build_src_cfg (UINT8 *p_pref_cfg, UINT8 *p_src_cap)
else if (src_cap.samp_freq & A2D_SBC_IE_SAMP_FREQ_44)
pref_cap.samp_freq = A2D_SBC_IE_SAMP_FREQ_44;
- if (src_cap.ch_mode & A2D_SBC_IE_CH_MD_JOINT)
+ if (property_get_int32(A2DP_SBC_HD_ENABLE_PROP, 0)
+ && (src_cap.ch_mode & A2D_SBC_IE_CH_MD_DUAL))
+ pref_cap.ch_mode = A2D_SBC_IE_CH_MD_DUAL;
+ else if (src_cap.ch_mode & A2D_SBC_IE_CH_MD_JOINT)
pref_cap.ch_mode = A2D_SBC_IE_CH_MD_JOINT;
else if (src_cap.ch_mode & A2D_SBC_IE_CH_MD_STEREO)
pref_cap.ch_mode = A2D_SBC_IE_CH_MD_STEREO;
@@ -2209,6 +2226,8 @@ BOOLEAN bta_av_co_audio_set_codec(const tBTIF_AV_MEDIA_FEEDINGS *p_feeding, tBTI
new_cfg_sbc.id = BTIF_AV_CODEC_SBC;
sbc_config = btif_av_sbc_default_config;
+ if (property_get_int32(A2DP_SBC_HD_ENABLE_PROP, 0))
+ sbc_config = btif_av_sbc_alt_config;
if ((p_feeding->cfg.pcm.num_channel != 1) &&
(p_feeding->cfg.pcm.num_channel != 2))
{
diff --git a/btif/src/btif_media_task.c b/btif/src/btif_media_task.c
index cac0c2211..4c956bd3c 100644
--- a/btif/src/btif_media_task.c
+++ b/btif/src/btif_media_task.c
@@ -59,6 +59,7 @@
#include "osi/include/metrics.h"
#include "osi/include/mutex.h"
#include "osi/include/thread.h"
+#include "osi/include/properties.h"
#include "bt_utils.h"
#include "a2d_api.h"
#include "a2d_int.h"
@@ -114,6 +115,8 @@ OI_INT16 pcmData[15*SBC_MAX_SAMPLES_PER_FRAME*SBC_MAX_CHANNELS];
#include "bta_api.h"
#endif
+#define A2DP_SBC_HD_PROP "persist.bt.sbc_hd_higher_kbps"
+
/*****************************************************************************
** Constants
@@ -209,12 +212,16 @@ enum {
#ifdef BTA_AV_SPLIT_A2DP_DEF_FREQ_48KHZ
#define BTIF_A2DP_DEFAULT_BITRATE 496
+#define BTIF_A2DP_3DH5_BITRATE 601
+#define BTIF_A2DP_2DH5_ALT_BITRATE 649
#ifndef BTIF_A2DP_NON_EDR_MAX_RATE
#define BTIF_A2DP_NON_EDR_MAX_RATE 237
#endif
#else
#define BTIF_A2DP_DEFAULT_BITRATE 455
+#define BTIF_A2DP_3DH5_BITRATE 552
+#define BTIF_A2DP_2DH5_ALT_BITRATE 596
#ifndef BTIF_A2DP_NON_EDR_MAX_RATE
#define BTIF_A2DP_NON_EDR_MAX_RATE 229
@@ -232,6 +239,7 @@ enum {
/* 2DH5 payload size of 679 bytes - (4 bytes L2CAP Header + 12 bytes AVDTP Header) */
#define MAX_2MBPS_AVDTP_MTU 663
+#define MIN_3MBPS_AVDTP_SAFE_MTU 800
#define USEC_PER_SEC 1000000L
#define TPUT_STATS_INTERVAL_US (3000*1000)
@@ -1252,6 +1260,12 @@ static UINT16 btif_media_task_get_sbc_rate(void)
{
rate = BTIF_A2DP_NON_EDR_MAX_RATE;
APPL_TRACE_DEBUG("non-edr a2dp sink detected, restrict rate to %d", rate);
+ } else if (btif_av_peer_supports_3mbps()
+ && btif_media_cb.TxAaMtuSize >= MIN_3MBPS_AVDTP_SAFE_MTU) {
+ rate = BTIF_A2DP_3DH5_BITRATE;
+ } else if (!btif_av_peer_supports_3mbps()
+ && property_get_int32(A2DP_SBC_HD_PROP, 0)) {
+ rate = BTIF_A2DP_2DH5_ALT_BITRATE;
}
return rate;
Reference in New Issue View Git Blame Copy Permalink