- Remove some more blobs
- 19.1: disable FP animation (jesec)
- 18.1: mata: allow major upgrades (to 19.1) (Updater patch by erfanoabdi)
- mata: disable Vulkan, it doesn't work
Signed-off-by: Tad <tad@spotco.us>
Drop long non-compiling devices:
- 14.1: n7100, jellypro
- 15.1: himaul, oneplus2
- 16.0: zenfone3, fugu
- 17.1: yellowstone, fugu
- 18.1: bonito, sargo
Drop in favor of 19.1:
- 17.1: bonito, sargo
- 18.1: pro1, aura, sunfish, coral, flame, bramble, redfin
(experimental, but these devices don't currently appear to have any users)
Signed-off-by: Tad <tad@spotco.us>
Change the property too, so it takes effect next update.
Since 16.0 lacks a toggle, this effectively disables the feature for it.
Even devices with 4GB of RAM have usability severely impacted.
Plus some other tweaks/churn
Signed-off-by: Tad <tad@spotco.us>
alioth, beryllium, davinci, vayu were tested working without this
lavender however would not boot
lmi was not tested
lavender, unlocked, managed to get into some weird broken state
that won't even boot after this, not even with Lineage or TWRP
:(
enchilada/fajita 18.1 use stock vendor and don't boot either
enchilada is tested booting again after this
Signed-off-by: Tad <tad@spotco.us>
- Turns out AVB was set permissive this entire time :(
--flags 2 == VERIFICATION_DISABLED
- APEX support from GrapheneOS
- Disable vbmeta chaining like GrapheneOS
and optionally handle it like CalyxOS
taimen 19.1 boots with locked bootloader successfully after this
Signed-off-by: Tad <tad@spotco.us>
This ensures init_on_alloc/free is used instead of page poisioning where available.
3.4 through 3.18 have a patch without a toggle for page sanitization.
Signed-off-by: Tad <tad@spotco.us>
- 16.0: drop wallpaper optimization patch, questionable source
- deblobber: don't remove libmmparser_lite.so, potentially used by camera
- 17.1: pick Q_asb_2021-12, excluding a broken patch
- clark 17.1: some camera denial fixes
- alioth: unmark broken
- 17.1: switch to upstream glibc fix
- 17.1/18.1: disable per app sensors permission patchset, potential camera issues
Signed-off-by: Tad <tad@spotco.us>
This will apply 3.10 and 3.18 specific patches to 3.0
Example of tuna 3.0 kernel:
199 without loose versioning
311 with loose versioning
364 with extreme loose versioning
Signed-off-by: Tad <tad@spotco.us>
This will for example apply a 3.4 specific patch to 3.0 if no 3.0 specific patch is available.
Tested compiling on 14.1 and booting on toroplus.
Will be applied to other branches soon.
Signed-off-by: Tad <tad@spotco.us>
No change to AVB devices except for enabling on more
Verity devices have the potential to regress by not booting
No change to non-verity/avb devices
Tested working on: mata, cheeseburger, fajita
Signed-off-by: Tad <tad@spotco.us>
- Put more blobs behind flags for testing purposes
- Potential graphics fix for newer devices
- Removes more Wi-Fi display blobs
- Remove some misc blobs
Signed-off-by: Tad <tad@spotco.us>
Based off of patches from CalyxOS as noted in each included patch.
Tested and verified working on klte and mata 18.1
Signed-off-by: Tad <tad@spotco.us>
after the CVE-2021-Misc2 import and hardenDefconfig overhaul
also sync 18.1 DnsResovler patches with:
6332b25b87f8490d024a
Signed-off-by: Tad <tad@spotco.us>
I have a sneaking suspicion that the length of some device command lines is
causing boot issues.
eg. with the recent additions, klte boots fine, but recovery doesn't, maybe
bootloader is adding more flags, exceeding a limit?
Signed-off-by: Tad <tad@spotco.us>
- disable disablement of PROC_PAGE_MONITOR to fix memory stats calculation
- enable slub_nomerge, similar to slab_nomerge for pre 3.18 kernels
slub_nomerge was already default enabled on many 3.10 devices via:
0006-AndroidHardening-Kernel_Hardening/3.10/0010.patch
Signed-off-by: Tad <tad@spotco.us>
- Include TalkBack
- Fixup hosts inclusion, due to path mismatch
- 14.1: bump patch level to match the picked ASB
- 14.1: m7-common: deblobber fix
Signed-off-by: Tad <tad@spotco.us>
- Remove some changes that have been commented for a while
- Don't remove the QCOM VR repos
- Adjust the default quick tiles
- Don't force hardware layers for recents
- Only generate deltas for update_engine devices
- Cherrypick: Update WebView to 90.0.4430.66
- Adjust yylloc sed line
- Add comments to 17.1 devices explaining why they aren't removed for 18.1 yet
PRODUCT_OTA_PUBLIC_KEYS is meant to be set by a vendor tree, something
we don't use.
Override it at the source and set it explicitely as well.
This ensures that the compiled recovery.img and the one generated by
sign_target_files_apks.py includes the real public keys for verification.
11.0 signing is ignored.
This will need to be extensively tested as breakage can mean brick on locked
devices.
Although in failure cases it seems test-keys are accepted.
--
After much testing there appears to be a deeper issue with how keys
are inserted into the recovery and handled
- 18.1: disable m8, thermanager is not yet ready
- 17.1: drop cheeseburger/dumpling, it is absolutely broken
- deblobber: remove euicc + others
- deblobber: hack to remove vintf fragments
- Disable generation of unused OTA to reduce compile time
- 17.1+: Disable APEX, breaks signing, and is also useless since no Play Store.
- 18.1: Fixup signing
- Deblobber: don't remove mfc_fw.bin, used for media decode
- Deblobber: don't remove es305_fw.bin, used for audio processing
- don't force dexpreopt on manta, likely breaks Wi-Fi
- fix some SELinux denials on manta
- Add m7 and avicii (untested)
- Use low_ram target on <2GB devices
Silly me, this never did anything due to the git reset...
- Update Chromium WebView cherrypick
