Create port-knocking.md

This commit is contained in:
Omar Santos 2023-05-22 13:48:44 -04:00 committed by GitHub
parent 62c8ee699b
commit e31b8d8f41
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -0,0 +1,109 @@
# Port Knocking and Single Packet Authorization (SPA)
Port Knocking is a technique used to secure network services by adding an extra layer of protection to the system's firewall. It involves a series of connection attempts to predefined closed ports in a particular sequence or pattern. Only after the correct sequence of connection attempts (knocks) is made, the firewall dynamically opens the desired port or ports, allowing access to the protected service.
The basic idea behind Port Knocking is that the system's ports are initially closed, making them invisible to potential attackers. To gain access, a user or client must send connection attempts (knocks) to a specific sequence of closed ports, which acts as a secret "knock code." Once the correct sequence is detected by the Port Knocking daemon, the firewall rules are dynamically modified to permit access to the requested service.
Port Knocking offers an additional layer of security by hiding services and making them accessible only to those who know the correct knock sequence. It can provide protection against port scanning, automated attacks, and unauthorized access attempts. As the knocking sequence is typically predefined and known only to authorized users, it adds an extra level of obscurity to the system.
However, it's important to note that Port Knocking should not be considered a standalone security measure. It is typically used in combination with other security measures like strong authentication, encryption, and proper firewall configurations to create a more robust defense for network services.
It's worth mentioning that Port Knocking has evolved over time, and alternative techniques like Single Packet Authorization (SPA) have been developed to address some limitations and potential weaknesses associated with traditional Port Knocking implementations.
## Setting Up Port Knocking
To set up Port Knocking in Linux, you can follow these steps:
1. Install the necessary packages: Ensure that the required packages for Port Knocking are installed on your Linux system. The most common package used is `knockd`.
2. Configure the firewall: Set up the firewall rules to block access to the desired ports initially. For example, you can use iptables or firewalld to deny incoming connections to the ports you want to protect.
3. Configure knockd: Edit the `knockd` configuration file located at `/etc/knockd.conf` to define the Port Knocking sequence. Specify the sequence of ports that need to be "knocked" and the action to be performed once the correct sequence is received.
An example `knockd.conf` configuration could look like this:
```
[options]
logfile = /var/log/knockd.log
[opencloseSSH]
sequence = 1234,5678,9876
seq_timeout = 10
start_command = /sbin/iptables -A INPUT -s %IP% -p tcp --dport 22 -j ACCEPT
cmd_timeout = 10
stop_command = /sbin/iptables -D INPUT -s %IP% -p tcp --dport 22 -j ACCEPT
```
In this example, the Port Knocking sequence is 1234, 5678, 9876, and when received, it opens port 22 for SSH connections.
4. Start the knockd service: Start the `knockd` service to activate the Port Knocking configuration. The command to start the service depends on your Linux distribution. For example:
```
sudo systemctl start knockd # For systemd-based systems
```
5. Test the Port Knocking setup: From a remote system, use a tool like `nmap` or `knock` to send the specified sequence of packets to the required ports. For example, using `knock`:
```
knock <server_IP> 1234 5678 9876
```
If the correct sequence is received within the defined timeout period, the firewall will open the specified port, allowing access for the desired service.
6. Adjust logging and security: Customize the logging options in the `knockd` configuration to suit your needs. Additionally, ensure that you have appropriate security measures in place, such as strong authentication and IP restrictions, to further protect your system.
Remember to adjust the configuration based on your specific requirements and Linux distribution. Consult the official documentation for `knockd` and your firewall management tool for detailed instructions and additional options.
## Single Packet Authorization (SPA)
Single Packet Authorization (SPA) is an advanced security technique that provides a secure and efficient method for accessing network services. It is an evolution of the traditional Port Knocking concept and offers enhanced security and flexibility.
In SPA, instead of requiring a predefined sequence of connection attempts like in Port Knocking, a single encrypted and authenticated packet, referred to as the "SPA packet," is sent to the system to authorize access to a specific service or resource.
Here's a general overview of how SPA works:
1. Generating the SPA packet: To initiate access, the client generates an SPA packet using a shared secret and other required parameters. The packet typically includes information such as the desired service, timestamp, source IP address, cryptographic signatures, and potentially additional authorization data.
2. Sending the SPA packet: The client sends the SPA packet to the target system through a network packet. This packet is typically sent to a closed or non-existent port to minimize detection.
3. Firewall rules and service access: When the target system receives the SPA packet, it verifies the authenticity and integrity of the packet using cryptographic signatures and shared secrets. If the packet is valid, the system dynamically modifies the firewall rules to permit access to the requested service or resource for a specified period.
4. Service access: With the firewall rules adjusted, the authorized client can now connect to the desired service or resource within the allowed timeframe. The system typically uses port forwarding or other mechanisms to redirect incoming traffic to the authorized service.
SPA provides several advantages over traditional Port Knocking:
- Enhanced security: SPA relies on strong cryptographic techniques and authentication mechanisms, making it resistant to replay attacks, spoofing, and tampering attempts.
- Flexibility: SPA allows fine-grained access control to specific services or resources, granting access only to authorized clients for a limited time window.
- Reduced network traffic: As SPA involves sending only a single packet, it reduces the amount of network traffic compared to traditional Port Knocking, which requires a sequence of connection attempts.
- Auditability: SPA enables detailed logging and auditing capabilities since every access attempt is associated with a specific packet and cryptographic signatures.
SPA is a powerful technique for securing network services, especially when combined with other security measures like strong authentication, encryption, and proper firewall configurations. It provides an additional layer of protection against unauthorized access attempts and strengthens the overall security posture of the system.
## Setting Up SPA
Configuring Single Packet Authorization (SPA) in Ubuntu involves using a combination of tools to implement the technique. Here's a general outline of the steps involved:
1. Install the necessary packages: Begin by installing the required software packages. SPA can be implemented using tools such as fwknop (FireWall KNock OPerator) for SPA packet generation and handling, and the appropriate firewall management tool (e.g., iptables or ufw).
2. Configure the firewall: Set up your firewall rules to restrict access to the desired service or services. By default, deny incoming connections to those services. You can use iptables or ufw to define the initial firewall rules.
3. Install and configure fwknop: Install fwknop on your Ubuntu system. The specific installation steps may vary depending on the Ubuntu version and package availability. Once installed, configure fwknop by editing the `/etc/fwknop/fwknop.conf` file. Customize the configuration options according to your needs, including defining the SPA access policies and shared secrets.
4. Generate the SPA packet: Use the `fwknop` command-line tool to generate an SPA packet. Specify the necessary parameters, such as the target IP address, access policy, and shared secret. This will create an encrypted and authenticated SPA packet.
5. Configure the firewall rules to open ports: Upon receiving a valid SPA packet, fwknop modifies the firewall rules to allow access to the specified service or services for a limited time window. Configure fwknop to work in conjunction with your firewall management tool (iptables or ufw) to dynamically open the required ports based on the received SPA packet.
6. Test the SPA setup: On a separate machine or network, attempt to send the SPA packet generated in Step 4 to the Ubuntu system's IP address. Ensure that the packet reaches the system and that the firewall rules are dynamically adjusted to permit access to the desired service or services.
It's important to refer to the official documentation and resources for fwknop and your chosen firewall management tool for detailed instructions specific to your Ubuntu version. Also, consider security best practices, such as using strong authentication, securing the shared secrets, and regularly updating and monitoring your system.
Note: The steps provided are a general overview, and the actual implementation may vary depending on your specific requirements and Ubuntu version.
Certainly! Here are the links to the documentation for both Port Knocking and Single Packet Authorization (SPA):
### Port Knocking References:
- "Port Knocking - Wikipedia article": Provides an overview of Port Knocking and its concepts.
- Link: [Port Knocking - Wikipedia](https://en.wikipedia.org/wiki/Port_knocking)
- "Port Knocking - ArchWiki": Offers detailed information and instructions on implementing Port Knocking in Linux, including example configurations.
- Link: [Port Knocking - ArchWiki](https://wiki.archlinux.org/title/Port_knocking)
### Single Packet Authorization (SPA) References:
- "fwknop: Single Packet Authorization (SPA) ": Offers detailed documentation on fwknop, a widely used SPA implementation.
- Link: [fwknop: Single Packet Authorization (SPA) documentation]([https://www.cipherdyne.org/fwknop/docs/SPA.html](https://github.com/mrash/fwknop))
Remember to refer to the official documentation, user guides, and community resources for the most accurate and up-to-date information on Port Knocking and SPA. These resources will provide more in-depth knowledge, configuration examples, and troubleshooting tips specific to each technique.