diff --git a/SCOR/wccp_and_pbr_to_wsa.md b/SCOR/wccp_and_pbr_to_wsa.md
new file mode 100644
index 0000000..9569b6d
--- /dev/null
+++ b/SCOR/wccp_and_pbr_to_wsa.md
@@ -0,0 +1,60 @@
+# Configuring WCCP or Policy-Based Routing to Send Traffic to WSA
+
+## Configuring WCCP on a Cisco Switch
+Let’s take a look on how to configure WCCP on a Cisco switch to redirect traffic to the Cisco Secure Web Appliance. 
+
+1. Configure an access control list (ACL) to match the web traffic.
+
+```
+ip access-list extended WEB-TRAFFIC
+ permit tcp 10.1.1.0 0.0.0.255 any eq www
+ permit tcp 10.1.2.0 0.0.0.255 any eq www
+ permit tcp 10.1.1.0 0.0.0.255 any eq 443
+ permit tcp 10.1.2.0 0.0.0.255 any eq 443
+```
+   
+2. Configure another ACL to define where to send the traffic (that is, the Cisco Secure Web Appliance’s IP address).
+
+```
+ip access-list standard WSA
+ permit 10.1.3.3
+```
+
+3. Create the WCCP lists.
+```
+ip wccp web-cache redirect-list HTTP-TRAFFIC group-list WSA
+ip wccp 10 redirect-list FTP-TRAFFIC group-list WSA
+ip wccp 20 redirect-list HTTPS-TRAFFIC group-list WSA
+```
+
+4. Configure the WCCP redirection of traffic on the source interface.
+```
+interface vlan88
+ ip wccp web-cache redirect in
+ ip wccp 10 redirect in
+ ip wccp 20 redirect in
+```
+
+
+
+## Traffic Redirection with Policy-Based Routing
+You can also configure PBR on a Cisco router to redirect web traffic to the Cisco Secure Web Appliance.
+
+Configuring PBR can affect the router’s performance if enabled in software (without hardware acceleration). You should review the respective router documentation to determine any impact.
+
+- First, a PBR policy is configured in a Cisco router that matches traffic from two source subnets (10.1.1.0/24 and 10.1.1.2.0/24). 
+- The web traffic is received on interface VLAN 88.
+- The traffic is sent to the Cisco Secure Web Appliance configured with IP address 10.1.2.3.
+
+```
+access-list 101 permit tcp 10.1.1.0 0.0.0.255 any eq 80
+access-list 101 permit tcp 10.1.2.0 0.0.0.255 any eq 80
+access-list 101 permit tcp 10.1.1.0 0.0.0.255 any eq 443
+access-list 101 permit tcp 10.1.2.0 0.0.0.255 any eq 443
+!
+route-map WebRedirect permit 10
+ match ip address 101
+ set ip next-hop 10.1.3.3
+interface vlan88
+ ip policy route-map WebRedirect
+```