cyber-security-resources/wireless_resources/virtual_adapters.md

196 lines
6.6 KiB
Markdown
Raw Normal View History

2018-11-27 23:04:45 -05:00
# Using Kernel Modules to Simulate Wireless Adapters to Practice Pen Testing
You can use mac80211_hwsim is a software simulator of 802.11 radio(s) for mac80211 in Kali Linux and other penetration testing distributions like Parrot.
[mac80211_hwsim](https://wireless.wiki.kernel.org/en/users/drivers/mac80211_hwsim) kernel module has a parameter 'radios' that can be used to select how many radios are simulated (default 2). This allows configuration of both very simply setups (e.g., just a single access point and a station) or large scale tests (multiple access points with hundreds of stations).
The following site provides a description:
- https://wireless.wiki.kernel.org/en/users/drivers/mac80211_hwsim
## Starting the Kernel Module in Kali
In my Kali Linux box, I have only one active interface (eth0).
```
root@kali:~# ip -brie a
lo UNKNOWN 127.0.0.1/8 ::1/128
eth0 UP 172.16.217.170/24 fe80::20c:29ff:fe3c:82b0/64
```
I am starting the simulator kernel module with the `modprobe mac80211_hwsim` command:
```
root@kali:~# modprobe mac80211_hwsim
```
After starting the module, the wireless interfaces are shown:
```
root@kali:~# ip -brie a
lo UNKNOWN 127.0.0.1/8 ::1/128
eth0 UP 172.16.217.170/24 fe80::20c:29ff:fe3c:82b0/64
wlan0 DOWN
wlan1 DOWN
hwsim0 DOWN
```
You can then install `hostapd` to create a wireless access point and then use aircrack-ng to perform wireless assessments.
## Install and Configure hostapd
You can then install `hostapd`, as shown below:
```
root@kali:~# sudo apt install hostapd
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hostapd
0 upgraded, 1 newly installed, 0 to remove and 1748 not upgraded.
Need to get 608 kB of archives.
After this operation, 1,549 kB of additional disk space will be used.
Get:1 http://archive.linux.duke.edu/kalilinux/kali kali-rolling/main amd64 hostapd amd64 2:2.6-18 [608 kB]
Fetched 608 kB in 2s (301 kB/s)
Selecting previously unselected package hostapd.
(Reading database ... 353210 files and directories currently installed.)
Preparing to unpack .../hostapd_2%3a2.6-18_amd64.deb ...
Unpacking hostapd (2:2.6-18) ...
Setting up hostapd (2:2.6-18) ...
Created symlink /etc/systemd/system/hostapd.service → /dev/null.
update-rc.d: We have no instructions for the hostapd init script.
update-rc.d: It looks like a network service, we disable it.
Processing triggers for systemd (238-4) ...
Processing triggers for man-db (2.8.2-1) ...
Scanning processes...
Scanning candidates...
Scanning processor microcode...
Scanning linux images...
Running kernel seems to be up-to-date.
No services need to be restarted.
No containers need to be restarted.
User sessions running outdated binaries:
root @ session #3: bash[1599]
root@kali:~# hostapd
hostapd v2.6
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2016, Jouni Malinen <j@w1.fi> and contributors
usage: hostapd [-hdBKtv] [-P <PID file>] [-e <entropy file>] \
[-g <global ctrl_iface>] [-G <group>]\
[-i <comma-separated list of interface names>]\
<configuration file(s)>
options:
-h show this usage
-d show more debug messages (-dd for even more)
-B run daemon in the background
-e entropy file
-g global control interface path
-G group for control interfaces
-P PID file
-K include key data in debug messages
-f log output to debug file instead of stdout
-T = record to Linux tracing in addition to logging
(records all messages regardless of debug verbosity)
-i list of interface names to use
-S start all the interfaces synchronously
-t include timestamps in some debug messages
-v show hostapd version
root@kali:~#
```
2018-11-27 23:15:04 -05:00
**Note:** You can obtain the example of my `hostapd.conf` file [here](https://github.com/The-Art-of-Hacking/h4cker/blob/master/wireless_resources/hostapd.conf).
2018-11-27 23:04:45 -05:00
In my case, I ran into the following problem:
```
root@kali:# hostapd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
nl80211: Could not configure driver mode
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
nl80211 driver initialization failed.
wlan0: interface state UNINITIALIZED->DISABLED
wlan0: AP-DISABLED
hostapd_free_hapd_data: Interface wlan0 wasn't started
```
I fixed it as follows:
```
root@kali:# sudo nmcli radio wifi off
root@kali:# sudo rfkill unblock wlan
root@kali:# sudo ifconfig wlan0 10.15.0.1/24 up
root@kali:# hostapd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
Using interface wlan0 with hwaddr 26:6f:2b:e1:48:d1 and ssid "corp-net"
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
```
## Running aircrack-ng
If you are not familiar with aircrack-ng, you can watch the video course at: https://h4cker.org/wireless
Let's start `airmon-ng` and then launch `airodump-ng` just to test our configuration:
```
root@kali:~# airmon-ng start wlan1
Found 3 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to run 'airmon-ng check kill'
PID Name
544 NetworkManager
576 dhclient
723 wpa_supplicant
PHY Interface Driver Chipset
phy0 wlan0 mac80211_hwsim Software simulator of 802.11 radio(s) for mac80211
phy1 wlan1 mac80211_hwsim Software simulator of 802.11 radio(s) for mac80211
(mac80211 monitor mode vif enabled for [phy1]wlan1 on [phy1]wlan1mon)
(mac80211 station mode vif disabled for [phy1]wlan1)
root@kali:~#
```
Now, let's run airodump-ng:
```
root@kali:~# airodump-ng wlan1mon
```
You should see the corp-net SSID that is configured in the hostapd.conf file.
```
CH 12 ][ Elapsed: 6 s ][ 2018-11-27 23:02
BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
26:6F:2B:E1:48:D1 -29 5 0 0 11 54 WPA TKIP MGT corp-net
BSSID STATION PWR Rate Lost Frames Probe
```
## Installing DHCP server
Dnsmasq is going to act as our DNS and DHCP server, it can be installed with apt-get install dnsmasq. This is another super simple service with an easy to understand config file. Below is what I used, it defines a DHCP range, sets the router and DNS servers as 10.0.0.1 (options 3 and 6) and sets our upstream DNS server to one of OpenDNS's public DNS servers (server=208.67.222.222).
```
interface=wlan0
dhcp-range=10.0.0.10,10.0.0.100,8h
dhcp-option=3,10.0.0.1
dhcp-option=6,10.0.0.1
server=208.67.222.222
log-queries
log-dhcp
```